Messages in this thread | | | Date | Thu, 31 Jul 2008 12:30:53 +0800 | From | gshan <> | Subject | Re: PIIX4: DMA timeout issue |
| |
>> Another question is my PIIX4 chip has device ID + vendor ID of >> 0x71108086. But it finally >> was mapped to following ID of piix_pci_tbl[] array. Device of 0x7110 and >> 0x7010 should >> be quit different, right? >> > > Yes - I find tht one very odd - you might need to debug a bit to see what > is occuring if you think this is the case. > > Alan > Alan/Jeff, I tried to install ATA driver on PIIX4. After fixing IRQ number to 143 for primary and secondary channel. I got following output and it seems the driver has been loaded sucessfully. However, I couldn't see any information from /proc/devices. Do you have any ideas?
piix_init: enter piix_init_one: pci device: �[eh piix_init_one: vendor=0x00008086, device=0x00007111 piix_init_one: piix_host_priv allocated piix_init_one: ent->driver_data=0 ata_pci_init_one: n_ports=2 ata_pci_init_one: pci device enabled ata_pci_init_one: pci device class=0x00010180 ata_pci_init_one: legacy_mode=8 ata_pci_init_one: DMA mode has been set ata_pci_init_legacy_port: port_mask=0x0000000b ata_pci_init_legacy_port: ATA_PRIMARY_CMD=0x000001f0, ATA_PRIMARY_CTL=0x000003f6 ata_pci_init_legacy_port: ATA_SECONDARY_CMD=0x00000170, ATA_SECONDARY_CTL=0x00000376 ata_pci_init_legacy_port: BMDMA=0xfbf00000 , phys=0x00001000, phys_end=0x0000100f ata_pci_init_legacy_port: probe_ent initialized ata_pci_init_legacy_port: IRQ line of primary channel is 143 ata_pci_init_legacy_port: IRQ line of secondary channel is 143 ata_pci_init_one: Master set ata1: PATA max UDMA/33 cmd 0xfbeff1f0 ctl 0xfbeff3f6 bmdma 0xfbf00000 irq 143 ata2: PATA max UDMA/33 cmd 0xfbeff170 ctl 0xfbeff376 bmdma 0xfbf00008 irq 143 scsi0 : ata_piix scsi1 : ata_piix ata2.00: ATA-6: HTE721010G9AT00, MCZOA51A, max UDMA/100 ata2.00: 195371568 sectors, multi 0: LBA48 ata2.00: configured for UDMA/33 1:0:0:0: Direct-Access ATA HTE721010G9AT00 MCZO PQ: 0 ANSI: 5
/ $ cat /proc/devices Character devices: 1 mem 2 pty 3 ttyp 4 /dev/vc/0 4 tty 5 /dev/tty 5 /dev/console 5 /dev/ptmx 7 vcs 10 misc 13 input 90 mtd 128 ptm 136 pts 204 ttyMM 205 ttyVC 206 ttySC 253 telica_sysinfo 254 mlba
Block devices: 1 ramdisk 7 loop 31 mtdblock
Gavin
-- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |