lkml.org 
[lkml]   [2008]   [Jul]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 11/30] W1: w1_slave_read_id read bug, use device_attribute
Date
Fix bug reading the id sysfs file.  If less than the full 8 bytes were
read, the next read would start at the first byte instead of
continuing. It needed the offset added to memcpy, or the better
solution was to replace it with the device attribute instead of bin
attribute.

Signed-off-by: David Fries <david@fries.net>
Signed-off-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru>

---
drivers/w1/w1.c | 35 ++++++++++-------------------------
1 files changed, 10 insertions(+), 25 deletions(-)

diff --git a/drivers/w1/w1.c b/drivers/w1/w1.c
index 4bf2001..67b4b99 100644
--- a/drivers/w1/w1.c
+++ b/drivers/w1/w1.c
@@ -103,35 +103,20 @@ static ssize_t w1_slave_read_name(struct device *dev, struct device_attribute *a
return sprintf(buf, "%s\n", sl->name);
}

-static ssize_t w1_slave_read_id(struct kobject *kobj,
- struct bin_attribute *bin_attr,
- char *buf, loff_t off, size_t count)
+static ssize_t w1_slave_read_id(struct device *dev,
+ struct device_attribute *attr, char *buf)
{
- struct w1_slave *sl = kobj_to_w1_slave(kobj);
-
- if (off > 8) {
- count = 0;
- } else {
- if (off + count > 8)
- count = 8 - off;
-
- memcpy(buf, (u8 *)&sl->reg_num, count);
- }
+ struct w1_slave *sl = dev_to_w1_slave(dev);
+ ssize_t count = sizeof(sl->reg_num);

+ memcpy(buf, (u8 *)&sl->reg_num, count);
return count;
}

static struct device_attribute w1_slave_attr_name =
__ATTR(name, S_IRUGO, w1_slave_read_name, NULL);
-
-static struct bin_attribute w1_slave_attr_bin_id = {
- .attr = {
- .name = "id",
- .mode = S_IRUGO,
- },
- .size = 8,
- .read = w1_slave_read_id,
-};
+static struct device_attribute w1_slave_attr_id =
+ __ATTR(id, S_IRUGO, w1_slave_read_id, NULL);

/* Default family */

@@ -641,7 +626,7 @@ static int __w1_attach_slave_device(struct w1_slave *sl)
}

/* Create "id" entry */
- err = sysfs_create_bin_file(&sl->dev.kobj, &w1_slave_attr_bin_id);
+ err = device_create_file(&sl->dev, &w1_slave_attr_id);
if (err < 0) {
dev_err(&sl->dev,
"sysfs file creation for [%s] failed. err=%d\n",
@@ -663,7 +648,7 @@ static int __w1_attach_slave_device(struct w1_slave *sl)
return 0;

out_rem2:
- sysfs_remove_bin_file(&sl->dev.kobj, &w1_slave_attr_bin_id);
+ device_remove_file(&sl->dev, &w1_slave_attr_id);
out_rem1:
device_remove_file(&sl->dev, &w1_slave_attr_name);
out_unreg:
@@ -745,7 +730,7 @@ void w1_slave_detach(struct w1_slave *sl)
msg.type = W1_SLAVE_REMOVE;
w1_netlink_send(sl->master, &msg);

- sysfs_remove_bin_file(&sl->dev.kobj, &w1_slave_attr_bin_id);
+ device_remove_file(&sl->dev, &w1_slave_attr_id);
device_remove_file(&sl->dev, &w1_slave_attr_name);
device_unregister(&sl->dev);

--
1.4.4.4


\
 
 \ /
  Last update: 2008-07-11 15:55    [W:1.717 / U:0.028 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site