lkml.org 
[lkml]   [2008]   [Jul]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: pata_it821x completely broken
Date
Hello,
commenting out the error check after ata_dev_init_params() call in
ata_dev_read_id() function (libata-core.c), I got at least the device name.
The capacity is 0 so it doesn't work, obviously:

pata_it821x: controller in smart mode.
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [LNKC] -> GSI 11 (level, low) ->
IRQ 11
PCI: Setting latency timer of device 0000:00:12.0 to 64
scsi2 : pata_it821x
scsi3 : pata_it821x
ata3: PATA max MWDMA2 cmd 0x6800 ctl 0x6c00 bmdma 0x7800 irq 11
ata4: PATA max MWDMA2 cmd 0x7000 ctl 0x7400 bmdma 0x7808 irq 11
ata3.00: ATA-7: SAMSUNG HD400LD, WQ100-15, max UDMA/100
ata3.00: 781422768 sectors, multi 0: LBA48
ata3.01: ATA-0: Integrated Technology Express Inc, , max MWDMA2
ata3.01: 0 sectors, multi 0, CHS 0/0/0
IT821x RAID1 volume.
ata3.00: configured for DMA
ata3.01: configured for PIO
scsi 2:0:0:0: Direct-Access ATA SAMSUNG HD400LD WQ10 PQ: 0 ANSI: 5
sd 2:0:0:0: [sdb] 781422768 512-byte hardware sectors (400088 MB)
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support
DPO or FUA
sd 2:0:0:0: [sdb] 781422768 512-byte hardware sectors (400088 MB)
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support
DPO or FUA
sdb: sdb1 sdb2 sdb3 sdb4
sd 2:0:0:0: [sdb] Attached SCSI disk
sd 2:0:0:0: Attached scsi generic sg2 type 0
scsi 2:0:1:0: Direct-Access ATA Integrated Techn n/a PQ: 0 ANSI: 5
sd 2:0:1:0: [sdc] Too big for this kernel. Use a kernel compiled with support
for large block devices.
sd 2:0:1:0: [sdc] 0 512-byte hardware sectors (0 MB)
sd 2:0:1:0: [sdc] Write Protect is off
sd 2:0:1:0: [sdc] Mode Sense: 00 3a 00 00
sd 2:0:1:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support
DPO or FUA
sd 2:0:1:0: [sdc] Attached SCSI disk
sd 2:0:1:0: Attached scsi generic sg3 type 0


(0 is too big for the kernel, interesting :)


--
Ondrej Zary


\
 
 \ /
  Last update: 2008-07-10 22:37    [W:0.068 / U:0.856 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site