lkml.org 
[lkml]   [2008]   [Jun]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Subject[PATCH 10/16] ide: use rq->cmd instead of pc->c in atapi common code
Date
From
There should be no functionality change resulting from this patch.

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
---
drivers/ide/ide-atapi.c | 18 +++++++++++++-----
1 files changed, 13 insertions(+), 5 deletions(-)

diff --git a/drivers/ide/ide-atapi.c b/drivers/ide/ide-atapi.c
index 0e8b6f5..fa49344 100644
--- a/drivers/ide/ide-atapi.c
+++ b/drivers/ide/ide-atapi.c
@@ -22,6 +22,7 @@ ide_startstop_t ide_pc_intr(ide_drive_t *drive, struct ide_atapi_pc *pc,
void (*io_buffers)(ide_drive_t *, struct ide_atapi_pc *, unsigned, int))
{
ide_hwif_t *hwif = drive->hwif;
+ struct request *rq = HWGROUP(drive)->rq;
xfer_func_t *xferfunc;
unsigned int temp;
u16 bcount;
@@ -63,8 +64,9 @@ ide_startstop_t ide_pc_intr(ide_drive_t *drive, struct ide_atapi_pc *pc,
local_irq_enable_in_hardirq();

if (drive->media == ide_tape && !scsi &&
- (stat & ERR_STAT) && pc->c[0] == REQUEST_SENSE)
+ (stat & ERR_STAT) && rq->cmd[0] == REQUEST_SENSE)
stat &= ~ERR_STAT;
+
if ((stat & ERR_STAT) || (pc->flags & PC_FLAG_DMA_ERROR)) {
/* Error detected */
debug_log("%s: I/O error\n", drive->name);
@@ -75,16 +77,17 @@ ide_startstop_t ide_pc_intr(ide_drive_t *drive, struct ide_atapi_pc *pc,
goto cmd_finished;
}

- if (pc->c[0] == REQUEST_SENSE) {
+ if (rq->cmd[0] == REQUEST_SENSE) {
printk(KERN_ERR "%s: I/O error in request sense"
" command\n", drive->name);
return ide_do_reset(drive);
}

- debug_log("[cmd %x]: check condition\n", pc->c[0]);
+ debug_log("[cmd %x]: check condition\n", rq->cmd[0]);

/* Retry operation */
retry_pc(drive);
+
/* queued, but not started */
return ide_stopped;
}
@@ -95,8 +98,10 @@ cmd_finished:
dsc_handle(drive);
return ide_stopped;
}
+
/* Command finished - Call the callback function */
drive->pc_callback(drive);
+
return ide_stopped;
}

@@ -117,6 +122,7 @@ cmd_finished:
printk(KERN_ERR "%s: CoD != 0 in %s\n", drive->name, __func__);
return ide_do_reset(drive);
}
+
if (((ireason & IO) == IO) == !!(pc->flags & PC_FLAG_WRITING)) {
/* Hopefully, we will never get here */
printk(KERN_ERR "%s: We wanted to %s, but the device wants us "
@@ -125,6 +131,7 @@ cmd_finished:
(ireason & IO) ? "Read" : "Write");
return ide_do_reset(drive);
}
+
if (!(pc->flags & PC_FLAG_WRITING)) {
/* Reading - Check that we have enough space */
temp = pc->xferred + bcount;
@@ -175,7 +182,7 @@ cmd_finished:
pc->cur_pos += bcount;

debug_log("[cmd %x] transferred %d bytes on that intr.\n",
- pc->c[0], bcount);
+ rq->cmd[0], bcount);

/* And set the interrupt handler again */
ide_set_handler(drive, handler, timeout, expiry);
@@ -210,6 +217,7 @@ ide_startstop_t ide_transfer_pc(ide_drive_t *drive, struct ide_atapi_pc *pc,
ide_expiry_t *expiry)
{
ide_hwif_t *hwif = drive->hwif;
+ struct request *rq = HWGROUP(drive)->rq;
ide_startstop_t startstop;
u8 ireason;

@@ -240,7 +248,7 @@ ide_startstop_t ide_transfer_pc(ide_drive_t *drive, struct ide_atapi_pc *pc,

/* Send the actual packet */
if ((pc->flags & PC_FLAG_ZIP_DRIVE) == 0)
- hwif->output_data(drive, NULL, pc->c, 12);
+ hwif->output_data(drive, NULL, rq->cmd, 12);

return ide_started;
}
--
1.5.5.4


\
 
 \ /
  Last update: 2008-06-29 13:05    [W:0.088 / U:0.224 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site