Messages in this thread Patch in this message | | | Date | Sat, 28 Jun 2008 19:56:37 +0200 | From | Zbynek Hrabovsky <> | Subject | Re: [PATCH][RESEND] New type of DTV2000H TV Card |
| |
Hi Nicolas,
so I should install git and run these commands, or .. ? I'm really confuzzled.
But I had installed GPG and signed my patch, maybe this is what I should have done earlier. My key ID is: 7803B3E1
If you guys want me somethink more to do, write me ... I'll do my best.
Thanx for your time
Zbynek
On Fri, 20 Jun 2008 22:52:02 +0200 "Nicolas Marot" <nicolas.marot@gmail.com> wrote:
> Hi Zbynek, > > I think lines Mauro asks us are some git commands on driver source code > > nicolas > > > On Fri, Jun 20, 2008 at 11:52 PM, Zbynek Hrabovsky <hrabosh@t-email.cz> > wrote: > > > Hi Mauro, > > > > thanks for your answer. > > > > I've tried to apply the updated patch you've sent me and it is working, but > > .... > > > > ... there is a little problem with this: > > > > --- a/linux/drivers/media/video/cx88/cx88-mpeg.c Tue Jun 10 15:27:29 > > 2008 -0300 > > +++ b/linux/drivers/media/video/cx88/cx88-mpeg.c Fri Jun 13 15:07:34 > > 2008 -0300 > > @@ -148,6 +148,12 @@ > > cx_write(TS_SOP_STAT, 0); > > cx_write(TS_VALERR_CNTRL, 0); > > udelay(100); > > + break; > > + case CX88_BOARD_WINFAST_DTV2000H_2: > > + /* switch signal input to antena */ > > + cx_write(MO_GP0_IO, 0x00017300); > > + > > + cx_write(TS_SOP_STAT, 0x00); > > break; > > default: > > cx_write(TS_SOP_STAT, 0x00); > > > > > > This piece of code used to switch the input of RF signal to "Air Antenna" > > mode. When I was writing the patch, this code was executed every time I was > > tunning DVB-T station. (using Kaffeine, or sth.) But now ( I don't know why > > ... ) this code is ran only if the station is succesfully tuned ... which is > > late for switching RF input. > > > > So ... all the things about sound in analog TV and video inputs, etc. are > > working well, but switching between Cable and Air Antenna RF inputs must be > > done using programs for analog TV ... such as TvTime for example. > > > > It would be nice, if this patch (and driver) would be able to switch RF > > inputs in DVB-T mode somehow. My idea is, to have two DVB-T devices ... one > > would use Air Antenna input as a source of signal, second the Cable input as > > source of signal. This will provide us to receive DVB-T from both inputs > > (BTW ... original Windows driver is not able to do this). The problem is, > > that I'm not sure if I'm able to do it ... I have very poor idea how all the > > things around this driver works ...for example which c. file I should focus > > on. If you would give me a small piece of advise, where to start, I would be > > pleased. > > > > OK, I'm not sure if I understood what you meant by adding sign-off-by and > > reviewed-by line ... I hope I did what you want me to: > > > > > > So .. thanks for your time, > > Zbynek > > > > Signed-off-by: Zbynek Hrabovsky <hrabosh@t-email.cz> > > > > Reviewed-by: Zbynek Hrbaovsky <hrabosh@t-email.cz> > > > > diff -r 04ddbe145932 linux/drivers/media/video/cx88/cx88-cards.c > > --- a/linux/drivers/media/video/cx88/cx88-cards.c Tue Jun 10 15:27:29 > > 2008 -0300 > > +++ b/linux/drivers/media/video/cx88/cx88-cards.c Fri Jun 13 15:07:33 > > 2008 -0300 > > @@ -1284,7 +1284,7 @@ > > }, > > [CX88_BOARD_WINFAST_DTV2000H] = { > > /* video inputs and radio still in testing */ > > - .name = "WinFast DTV2000 H", > > + .name = "WinFast DTV2000 H ver. I (old)", > > .tuner_type = TUNER_PHILIPS_FMD1216ME_MK3, > > .radio_type = UNSET, > > .tuner_addr = ADDR_UNSET, > > @@ -1298,6 +1298,45 @@ > > .gpio2 = 0x00017304, > > .gpio3 = 0x02000000, > > }}, > > + .mpeg = CX88_MPEG_DVB, > > + }, > > + [CX88_BOARD_WINFAST_DTV2000H_2] = { > > + /* this is just a try */ > > + .name = "WinFast DTV2000 H ver. J (new)", > > + .tuner_type = TUNER_PHILIPS_FMD1216ME_MK3, > > + .radio_type = UNSET, > > + .tuner_addr = ADDR_UNSET, > > + .radio_addr = ADDR_UNSET, > > + .tda9887_conf = TDA9887_PRESENT, > > + .input = { { > > + .type = CX88_VMUX_TELEVISION, > > + .vmux = 0, > > + .gpio0 = 0x00017300, > > + .gpio1 = 0x00008207, > > + .gpio2 = 0x00000000, > > + .gpio3 = 0x02000000, > > + }, { > > + .type = CX88_VMUX_TELEVISION, > > + .vmux = 0, > > + .gpio0 = 0x00018300, > > + .gpio1 = 0x0000f207, > > + .gpio2 = 0x00017304, > > + .gpio3 = 0x02000000, > > + }, { > > + .type = CX88_VMUX_COMPOSITE1, > > + .vmux = 1, > > + .gpio0 = 0x00018301, > > + .gpio1 = 0x0000f207, > > + .gpio2 = 0x00017304, > > + .gpio3 = 0x02000000, > > + }, { > > + .type = CX88_VMUX_SVIDEO, > > + .vmux = 2, > > + .gpio0 = 0x00018301, > > + .gpio1 = 0x0000f207, > > + .gpio2 = 0x00017304, > > + .gpio3 = 0x02000000, > > + } }, > > .mpeg = CX88_MPEG_DVB, > > }, > > [CX88_BOARD_GENIATECH_DVBS] = { > > @@ -1963,6 +2002,10 @@ > > .subdevice = 0x665e, > > .card = CX88_BOARD_WINFAST_DTV2000H, > > },{ > > + .subvendor = 0x107d, > > + .subdevice = 0x6f2b, > > + .card = CX88_BOARD_WINFAST_DTV2000H_2, > > + }, { > > .subvendor = 0x18ac, > > .subdevice = 0xd800, /* FusionHDTV 3 Gold (original > > revision) */ > > .card = CX88_BOARD_DVICO_FUSIONHDTV_3_GOLD_Q, > > diff -r 04ddbe145932 linux/drivers/media/video/cx88/cx88-dvb.c > > --- a/linux/drivers/media/video/cx88/cx88-dvb.c Tue Jun 10 15:27:29 2008 > > -0300 > > +++ b/linux/drivers/media/video/cx88/cx88-dvb.c Fri Jun 13 15:07:34 2008 > > -0300 > > @@ -561,6 +561,7 @@ > > } > > break; > > case CX88_BOARD_WINFAST_DTV2000H: > > + case CX88_BOARD_WINFAST_DTV2000H_2: > > case CX88_BOARD_HAUPPAUGE_HVR1100: > > case CX88_BOARD_HAUPPAUGE_HVR1100LP: > > case CX88_BOARD_HAUPPAUGE_HVR1300: > > diff -r 04ddbe145932 linux/drivers/media/video/cx88/cx88-input.c > > --- a/linux/drivers/media/video/cx88/cx88-input.c Tue Jun 10 15:27:29 > > 2008 -0300 > > +++ b/linux/drivers/media/video/cx88/cx88-input.c Fri Jun 13 15:07:34 > > 2008 -0300 > > @@ -242,6 +242,7 @@ > > ir->sampling = 1; > > break; > > case CX88_BOARD_WINFAST_DTV2000H: > > + case CX88_BOARD_WINFAST_DTV2000H_2: > > ir_codes = ir_codes_winfast; > > ir->gpio_addr = MO_GP0_IO; > > ir->mask_keycode = 0x8f8; > > > > diff -r 04ddbe145932 linux/drivers/media/video/cx88/cx88.h > > --- a/linux/drivers/media/video/cx88/cx88.h Tue Jun 10 15:27:29 2008 > > -0300 > > +++ b/linux/drivers/media/video/cx88/cx88.h Fri Jun 13 15:07:34 2008 > > -0300 > > @@ -224,6 +224,7 @@ > > #define CX88_BOARD_DVICO_FUSIONHDTV_7_GOLD 65 > > #define CX88_BOARD_PROLINK_PV_8000GT 66 > > #define CX88_BOARD_KWORLD_ATSC_120 67 > > +#define CX88_BOARD_WINFAST_DTV2000H_2 68 > > > > enum cx88_itype { > > CX88_VMUX_COMPOSITE1 = 1, > > > > > > > > > -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1
Signed-off-by: Zbynek Hrabovsky <hrabosh@t-email.cz> Reviewed-by: Zbynek Hrabovsky <hrabosh@t-email.cz>
diff -r 04ddbe145932 linux/drivers/media/video/cx88/cx88-cards.c - --- a/linux/drivers/media/video/cx88/cx88-cards.c Tue Jun 10 15:27:29 2008 -0300 +++ b/linux/drivers/media/video/cx88/cx88-cards.c Fri Jun 13 15:07:33 2008 -0300 @@ -1284,7 +1284,7 @@ }, [CX88_BOARD_WINFAST_DTV2000H] = { /* video inputs and radio still in testing */ - - .name = "WinFast DTV2000 H", + .name = "WinFast DTV2000 H ver. I (old)", .tuner_type = TUNER_PHILIPS_FMD1216ME_MK3, .radio_type = UNSET, .tuner_addr = ADDR_UNSET, @@ -1298,6 +1298,45 @@ .gpio2 = 0x00017304, .gpio3 = 0x02000000, }}, + .mpeg = CX88_MPEG_DVB, + }, + [CX88_BOARD_WINFAST_DTV2000H_2] = { + /* this is just a try */ + .name = "WinFast DTV2000 H ver. J (new)", + .tuner_type = TUNER_PHILIPS_FMD1216ME_MK3, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .tda9887_conf = TDA9887_PRESENT, + .input = { { + .type = CX88_VMUX_TELEVISION, + .vmux = 0, + .gpio0 = 0x00017300, + .gpio1 = 0x00008207, + .gpio2 = 0x00000000, + .gpio3 = 0x02000000, + }, { + .type = CX88_VMUX_TELEVISION, + .vmux = 0, + .gpio0 = 0x00018300, + .gpio1 = 0x0000f207, + .gpio2 = 0x00017304, + .gpio3 = 0x02000000, + }, { + .type = CX88_VMUX_COMPOSITE1, + .vmux = 1, + .gpio0 = 0x00018301, + .gpio1 = 0x0000f207, + .gpio2 = 0x00017304, + .gpio3 = 0x02000000, + }, { + .type = CX88_VMUX_SVIDEO, + .vmux = 2, + .gpio0 = 0x00018301, + .gpio1 = 0x0000f207, + .gpio2 = 0x00017304, + .gpio3 = 0x02000000, + } }, .mpeg = CX88_MPEG_DVB, }, [CX88_BOARD_GENIATECH_DVBS] = { @@ -1963,6 +2002,10 @@ .subdevice = 0x665e, .card = CX88_BOARD_WINFAST_DTV2000H, },{ + .subvendor = 0x107d, + .subdevice = 0x6f2b, + .card = CX88_BOARD_WINFAST_DTV2000H_2, + }, { .subvendor = 0x18ac, .subdevice = 0xd800, /* FusionHDTV 3 Gold (original revision) */ .card = CX88_BOARD_DVICO_FUSIONHDTV_3_GOLD_Q, diff -r 04ddbe145932 linux/drivers/media/video/cx88/cx88-dvb.c - --- a/linux/drivers/media/video/cx88/cx88-dvb.c Tue Jun 10 15:27:29 2008 -0300 +++ b/linux/drivers/media/video/cx88/cx88-dvb.c Fri Jun 13 15:07:34 2008 -0300 @@ -561,6 +561,7 @@ } break; case CX88_BOARD_WINFAST_DTV2000H: + case CX88_BOARD_WINFAST_DTV2000H_2: case CX88_BOARD_HAUPPAUGE_HVR1100: case CX88_BOARD_HAUPPAUGE_HVR1100LP: case CX88_BOARD_HAUPPAUGE_HVR1300: diff -r 04ddbe145932 linux/drivers/media/video/cx88/cx88-input.c - --- a/linux/drivers/media/video/cx88/cx88-input.c Tue Jun 10 15:27:29 2008 -0300 +++ b/linux/drivers/media/video/cx88/cx88-input.c Fri Jun 13 15:07:34 2008 -0300 @@ -242,6 +242,7 @@ ir->sampling = 1; break; case CX88_BOARD_WINFAST_DTV2000H: + case CX88_BOARD_WINFAST_DTV2000H_2: ir_codes = ir_codes_winfast; ir->gpio_addr = MO_GP0_IO; ir->mask_keycode = 0x8f8; diff -r 04ddbe145932 linux/drivers/media/video/cx88/cx88.h - --- a/linux/drivers/media/video/cx88/cx88.h Tue Jun 10 15:27:29 2008 -0300 +++ b/linux/drivers/media/video/cx88/cx88.h Fri Jun 13 15:07:34 2008 -0300 @@ -224,6 +224,7 @@ #define CX88_BOARD_DVICO_FUSIONHDTV_7_GOLD 65 #define CX88_BOARD_PROLINK_PV_8000GT 66 #define CX88_BOARD_KWORLD_ATSC_120 67 +#define CX88_BOARD_WINFAST_DTV2000H_2 68
enum cx88_itype { CX88_VMUX_COMPOSITE1 = 1, -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.9 (GNU/Linux)
iEYEARECAAYFAkhmXRgACgkQPedPCXgDs+FAwgCghc3wFwpAmeGkMzGKoJi8HnHz W5EAn2iybN7vkU3nR7gqJ0k7NBOVSGXD =O/Qr -----END PGP SIGNATURE-----
| |