lkml.org 
[lkml]   [2008]   [Jun]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
SubjectRe: [PATCH 1/4] ide-pmac: media-bay support fixes
Date
On Monday 23 June 2008, Benjamin Herrenschmidt wrote:
>
> > Don't panic. It looks like it's something else in linux-next that's
> > changing some ifdef's in the media-bay code which is causing that.
> >
> > I managed to pull linux next at the merge point with your tree and
> > things apply. I'll use that to test.
>
> Ok, it doesn't work properly. It gets error trying to register
> the IDE device. Booting with a CD drive in and no disk in the drive
> gives the log below.
>
> I've verified that it works without your patches. If I apply only patch
> 1, it doesn't build due to some wrong construct in the probe code. I've
> hand fixed it, but then I hit a BUG_ON in ide_probe_port() (line 773).

Build error and/or your build fix would be useful here.

> mediabay boot time messages (before IDE probing) are:
>
> mediabay0: Registered Heathrow media-bay
> mediabay0: powering down
> mediabay0: switching to 3
> mediabay0: powering up
> mediabay0: enabling (kind:3)
> mediabay0: waiting reset (kind:3)
> mediabay0: waiting IDE reset (kind:3)
> mediabay0: waiting IDE ready (kind:3)
> mediabay0: up before IDE init
> mediabay1: Registered Heathrow media-bay
> mediabay1: powering down
> mediabay1: switching to 0
> mediabay1: powering up
> mediabay1: enabling (kind:0)
> mediabay1: waiting reset (kind:0)
> mediabay1: bay is up (kind:0)
>
> Later, IDE registers:
>
> (ide0 is another controller, only ide1 and ide2 are media bay based, and
> ide2 has no device on it at all).
>
> ide-pmac: Found Apple Heathrow ATA controller (macio), bus ID 1 (mediabay), irq 35
> ide1 at 0xc7020000-0xc7020070,0xc7020160 on irq 35
> ide-pmac: Found Apple Heathrow ATA controller (macio), bus ID 4 (mediabay), irq 67
> ide2 at 0xc7022000-0xc7022070,0xc7022160 on irq 67
> mediabay0: waiting IDE ready (kind:3)
> mediabay 0, registering IDE...
> IDE register error

Ok, I see the problem - we now need to clear dive->noprobe after
ide_device_add() call (pmac.c) or later ide_port_scan() call (mediabay.c)
will fail... also there was a pmif->mediabay check missing...

Please try the new version of patch #1 (the other patches are unchanged):

[...]

From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Subject: [PATCH] ide-pmac: media-bay support fixes (take 2)

* If MB_CD device has already been detected and bay is in mb_up state just
change bay's state to mb_ide_resetting and let probing thread do the rest
instead of having open-coded waiting for IDE device to become ready in
media_bay_set_ide_infos() and doing the probe by ide_device_add().

* Move media_bay_set_ide_infos() call after ide_device_add().

* Use check_media_bay() instead of check_media_bay_by_base(),
then remove the latter function.

v2:
* Check pmif->mediabay and clear drive->noprobe before calling
media_bay_set_ide_infos().

Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
drivers/ide/ppc/pmac.c | 23 +++++++++++++----------
drivers/macintosh/mediabay.c | 33 +++++----------------------------
include/asm-powerpc/mediabay.h | 1 -
3 files changed, 18 insertions(+), 39 deletions(-)

Index: b/drivers/ide/ppc/pmac.c
===================================================================
--- a/drivers/ide/ppc/pmac.c
+++ b/drivers/ide/ppc/pmac.c
@@ -1030,10 +1030,6 @@ pmac_ide_setup_device(pmac_ide_hwif_t *p
/* XXX FIXME: Media bay stuff need re-organizing */
if (np->parent && np->parent->name
&& strcasecmp(np->parent->name, "media-bay") == 0) {
-#ifdef CONFIG_PMAC_MEDIABAY
- media_bay_set_ide_infos(np->parent, pmif->regbase, pmif->irq,
- hwif);
-#endif /* CONFIG_PMAC_MEDIABAY */
pmif->mediabay = 1;
if (!bidp)
pmif->aapl_bus_id = 1;
@@ -1067,19 +1063,26 @@ pmac_ide_setup_device(pmac_ide_hwif_t *p

if (pmif->mediabay) {
#ifdef CONFIG_PMAC_MEDIABAY
- if (check_media_bay_by_base(pmif->regbase, MB_CD)) {
-#else
- if (1) {
+ if (check_media_bay(np->parent, MB_CD) == -ENODEV)
+ break;
#endif
- hwif->drives[0].noprobe = 1;
- hwif->drives[1].noprobe = 1;
- }
+ hwif->drives[0].noprobe = 1;
+ hwif->drives[1].noprobe = 1;
}

idx[0] = hwif->index;

ide_device_add(idx, &d);

+ if (pmif->mediabay) {
+ hwif->drives[0].noprobe = 0;
+ hwif->drives[1].noprobe = 0;
+#ifdef CONFIG_PMAC_MEDIABAY
+ media_bay_set_ide_infos(np->parent, pmif->regbase, pmif->irq,
+ hwif);
+#endif
+ }
+
return 0;
}

Index: b/drivers/macintosh/mediabay.c
===================================================================
--- a/drivers/macintosh/mediabay.c
+++ b/drivers/macintosh/mediabay.c
@@ -433,21 +433,6 @@ int check_media_bay(struct device_node *
}
EXPORT_SYMBOL(check_media_bay);

-int check_media_bay_by_base(unsigned long base, int what)
-{
- int i;
-
- for (i=0; i<media_bay_count; i++)
- if (media_bays[i].mdev && base == (unsigned long) media_bays[i].cd_base) {
- if ((what == media_bays[i].content_id) && media_bays[i].state == mb_up)
- return 0;
- media_bays[i].cd_index = -1;
- return -EINVAL;
- }
-
- return -ENODEV;
-}
-
int media_bay_set_ide_infos(struct device_node* which_bay, unsigned long base,
int irq, ide_hwif_t *hwif)
{
@@ -457,8 +442,6 @@ int media_bay_set_ide_infos(struct devic
struct media_bay_info* bay = &media_bays[i];

if (bay->mdev && which_bay == bay->mdev->ofdev.node) {
- int timeout = 5000, index = hwif->index;
-
down(&bay->lock);

bay->cd_port = hwif;
@@ -469,18 +452,12 @@ int media_bay_set_ide_infos(struct devic
up(&bay->lock);
return 0;
}
- printk(KERN_DEBUG "Registered ide%d for media bay %d\n", index, i);
- do {
- if (MB_IDE_READY(i)) {
- bay->cd_index = index;
- up(&bay->lock);
- return 0;
- }
- mdelay(1);
- } while(--timeout);
- printk(KERN_DEBUG "Timeount waiting IDE in bay %d\n", i);
+
+ /* let probing thread do the rest */
+ bay->state = mb_ide_resetting;
+
up(&bay->lock);
- return -ENODEV;
+ return 0;
}
}

Index: b/include/asm-powerpc/mediabay.h
===================================================================
--- a/include/asm-powerpc/mediabay.h
+++ b/include/asm-powerpc/mediabay.h
@@ -23,7 +23,6 @@ extern int media_bay_count;
#ifdef CONFIG_BLK_DEV_IDE_PMAC
#include <linux/ide.h>

-int check_media_bay_by_base(unsigned long base, int what);
/* called by IDE PMAC host driver to register IDE controller for media bay */
int media_bay_set_ide_infos(struct device_node *which_bay, unsigned long base,
int irq, ide_hwif_t *hwif);

\
 
 \ /
  Last update: 2008-06-23 23:47    [W:0.102 / U:0.268 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site