lkml.org 
[lkml]   [2008]   [Jun]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: sata_svw data corruption, strange problems
Alan Cox wrote:
>>> BTW. Tejun, I suppose that usually starting DMA after issuing the
>>> command is a standard practice of legacy/sff type controllers ? Or it's
>>> just because that's how linux did it until now ?
>> It's how the standard says it should be programmed. Please take a look
>> at section 3 of the following document.
>>
>> http://www.centrillium-it.com/Projects/idems100.pdf
>>
>> It's a non-issue for PATA ones as the host is responsible for running
>
> It's very much an issue for PATA. If you start the DMA before time things
> go wrong. The DMA has to start after the command is issued (or for ATAPI
> after the command and the cdb are issued). Various ATAPI devices get
> quite cross if you mess this up.
>
> In some cases the driver code also depends upon this as we software drive
> the data clocks so have to reprogram them after command issue and before
> data transfer begins.

I was saying drive getting ready before command issue was non issue.

--
tejun


\
 
 \ /
  Last update: 2008-06-23 15:09    [W:0.040 / U:0.804 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site