lkml.org 
[lkml]   [2008]   [Jun]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [alsa-devel] looping S/PDIF data
On 20-06-08 21:45, Pierre Ossman wrote:

> On Thu, 19 Jun 2008 14:48:19 +0200
> Takashi Iwai <tiwai@suse.de> wrote:
>
>> At Thu, 19 Jun 2008 14:39:05 +0200 (CEST),
>> Jaroslav Kysela wrote:
>>> I don't think that this patch is correct. DMA transfers should be disabled
>>> by:
>>>
>>> outl(what, TRID_REG(trident, T4D_STOP_B));
>>> outl(val, TRID_REG(trident, T4D_AINTEN_B));
>> They are already in the trigger callback as long as I saw the code
>> quickly. So the problem should be somewhere else.
>>
>>> lines. Adding &= ~SPDIF_EN can disable output from AC97 to S/PDIF as well.
>> That's true.
>>
>> Anyway, if you are up now, I'll let you hunt further as you are the
>> author of the driver :)
>>
>
> Are there any specs on this hardware? I could play around a bit myself,
> but I can't really find any documentation on the registers.

At:

ftp://ftp.alsa-project.org/pub/manuals/trident/

there's a 4D-Wave DX technical reference manual and .doc files which at
first glance look useful.

Rene.


\
 
 \ /
  Last update: 2008-06-20 21:55    [W:0.074 / U:0.084 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site