lkml.org 
[lkml]   [2008]   [Jun]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH 1/3] e1000: make ioport free
This patch makes e1000 driver ioport-free.
This corrects behavior in probe function so as not to request ioport
resources as long as they are not really needed. This is based on the
ioport-free patch of e1000 driver from Auke Kok and Tomohiro Kusumi.


Signed-off-by: Tomohiro Kusumi <kusumi.tomohiro@jp.fujitsu.com>
Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
---
drivers/net/e1000/e1000.h | 4 +
drivers/net/e1000/e1000_main.c | 88 +++++++++++++++++++++++++++++++++++------
2 files changed, 80 insertions(+), 12 deletions(-)

Index: linux-2.6.25.7/drivers/net/e1000/e1000.h
===================================================================
--- linux-2.6.25.7.orig/drivers/net/e1000/e1000.h
+++ linux-2.6.25.7/drivers/net/e1000/e1000.h
@@ -343,6 +343,10 @@ struct e1000_adapter {
boolean_t quad_port_a;
unsigned long flags;
uint32_t eeprom_wol;
+
+ /* for ioport free */
+ int bars;
+ int need_ioport;
};

enum e1000_state_t {
Index: linux-2.6.25.7/drivers/net/e1000/e1000_main.c
===================================================================
--- linux-2.6.25.7.orig/drivers/net/e1000/e1000_main.c
+++ linux-2.6.25.7/drivers/net/e1000/e1000_main.c
@@ -909,6 +909,44 @@ static void e1000_dump_eeprom(struct e10
}

/**
+ * e1000_is_need_ioport - determine if an adapter needs ioport resources or not
+ * @pdev: PCI device information struct
+ *
+ * Returns true if an adapter needs ioport resources
+ **/
+
+static int
+e1000_is_need_ioport(struct pci_dev *pdev)
+{
+ switch (pdev->device) {
+ case E1000_DEV_ID_82540EM:
+ case E1000_DEV_ID_82540EM_LOM:
+ case E1000_DEV_ID_82540EP:
+ case E1000_DEV_ID_82540EP_LOM:
+ case E1000_DEV_ID_82540EP_LP:
+ case E1000_DEV_ID_82541EI:
+ case E1000_DEV_ID_82541EI_MOBILE:
+ case E1000_DEV_ID_82541ER_LOM:
+ case E1000_DEV_ID_82541ER:
+ case E1000_DEV_ID_82541GI:
+ case E1000_DEV_ID_82541GI_LF:
+ case E1000_DEV_ID_82541GI_MOBILE:
+ case E1000_DEV_ID_82544EI_COPPER:
+ case E1000_DEV_ID_82544EI_FIBER:
+ case E1000_DEV_ID_82544GC_COPPER:
+ case E1000_DEV_ID_82544GC_LOM:
+ case E1000_DEV_ID_82545EM_COPPER:
+ case E1000_DEV_ID_82545EM_FIBER:
+ case E1000_DEV_ID_82546EB_COPPER:
+ case E1000_DEV_ID_82546EB_FIBER:
+ case E1000_DEV_ID_82546EB_QUAD_COPPER:
+ return true;
+ default:
+ return false;
+ }
+}
+
+/**
* e1000_probe - Device Initialization Routine
* @pdev: PCI device information struct
* @ent: entry in e1000_pci_tbl
@@ -932,9 +970,19 @@ e1000_probe(struct pci_dev *pdev,
int i, err, pci_using_dac;
uint16_t eeprom_data = 0;
uint16_t eeprom_apme_mask = E1000_EEPROM_APME;
+ int bars, need_ioport;
DECLARE_MAC_BUF(mac);

- if ((err = pci_enable_device(pdev)))
+ /* do not allocate ioport bars when not needed */
+ need_ioport = e1000_is_need_ioport(pdev);
+ if (need_ioport) {
+ bars = pci_select_bars(pdev, IORESOURCE_MEM | IORESOURCE_IO);
+ err = pci_enable_device(pdev);
+ } else {
+ bars = pci_select_bars(pdev, IORESOURCE_MEM);
+ err = pci_enable_device_mem(pdev);
+ }
+ if (err)
return err;

if (!(err = pci_set_dma_mask(pdev, DMA_64BIT_MASK)) &&
@@ -949,7 +997,8 @@ e1000_probe(struct pci_dev *pdev,
pci_using_dac = 0;
}

- if ((err = pci_request_regions(pdev, e1000_driver_name)))
+ err = pci_request_selected_regions(pdev, bars, e1000_driver_name);
+ if (err)
goto err_pci_reg;

pci_set_master(pdev);
@@ -967,6 +1016,8 @@ e1000_probe(struct pci_dev *pdev,
adapter->pdev = pdev;
adapter->hw.back = adapter;
adapter->msg_enable = (1 << debug) - 1;
+ adapter->bars = bars;
+ adapter->need_ioport = need_ioport;

err = -EIO;
adapter->hw.hw_addr = ioremap(pci_resource_start(pdev, BAR_0),
@@ -974,12 +1025,15 @@ e1000_probe(struct pci_dev *pdev,
if (!adapter->hw.hw_addr)
goto err_ioremap;

- for (i = BAR_1; i <= BAR_5; i++) {
- if (pci_resource_len(pdev, i) == 0)
- continue;
- if (pci_resource_flags(pdev, i) & IORESOURCE_IO) {
- adapter->hw.io_base = pci_resource_start(pdev, i);
- break;
+ if (adapter->need_ioport) {
+ for (i = BAR_1; i <= BAR_5; i++) {
+ if (pci_resource_len(pdev, i) == 0)
+ continue;
+ if (pci_resource_flags(pdev, i) & IORESOURCE_IO) {
+ adapter->hw.io_base =
+ pci_resource_start(pdev, i);
+ break;
+ }
}
}

@@ -1251,7 +1305,7 @@ err_sw_init:
err_ioremap:
free_netdev(netdev);
err_alloc_etherdev:
- pci_release_regions(pdev);
+ pci_release_selected_regions(pdev, bars);
err_pci_reg:
err_dma:
pci_disable_device(pdev);
@@ -1304,7 +1358,7 @@ e1000_remove(struct pci_dev *pdev)
iounmap(adapter->hw.hw_addr);
if (adapter->hw.flash_address)
iounmap(adapter->hw.flash_address);
- pci_release_regions(pdev);
+ pci_release_selected_regions(pdev, adapter->bars);

free_netdev(netdev);

@@ -5242,7 +5296,12 @@ e1000_resume(struct pci_dev *pdev)

pci_set_power_state(pdev, PCI_D0);
pci_restore_state(pdev);
- if ((err = pci_enable_device(pdev))) {
+
+ if (adapter->need_ioport)
+ err = pci_enable_device(pdev);
+ else
+ err = pci_enable_device_mem(pdev);
+ if (err) {
printk(KERN_ERR "e1000: Cannot enable PCI device from suspend\n");
return err;
}
@@ -5337,8 +5396,13 @@ static pci_ers_result_t e1000_io_slot_re
{
struct net_device *netdev = pci_get_drvdata(pdev);
struct e1000_adapter *adapter = netdev->priv;
+ int err;

- if (pci_enable_device(pdev)) {
+ if (adapter->need_ioport)
+ err = pci_enable_device(pdev);
+ else
+ err = pci_enable_device_mem(pdev);
+ if (err) {
printk(KERN_ERR "e1000: Cannot re-enable PCI device after reset.\n");
return PCI_ERS_RESULT_DISCONNECT;
}



\
 
 \ /
  Last update: 2008-06-20 04:59    [W:0.089 / U:0.584 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site