This message generated a parse failure. Raw output follows here. Please use 'back' to navigate. From devnull@lkml.org Mon May 20 20:59:28 2024 Delivery-date: Wed, 18 Jun 2008 19:59:15 +0000 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1752202AbYFRT51 (ORCPT ); Wed, 18 Jun 2008 15:57:27 -0400 Received: from server009.webpack.hosteurope.de ([80.237.130.17]:45488 "EHLO server009.webpack.hosteurope.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752114AbYFRT5W (ORCPT ); Wed, 18 Jun 2008 15:57:22 -0400 Received: from port-92-195-79-118.dynamic.qsc.de ([92.195.79.118] helo=joshua.local); authenticated by server009.webpack.hosteurope.de running ExIM using esmtpsa (TLSv1:RC4-SHA:128) id 1K93mQ-0002pC-Vc; Wed, 18 Jun 2008 21:57:19 +0200 From: Daniel Exner Reply-To: webmaster@dragonslave.de To: "Yinghai Lu" Subject: Re: linux-next Regression: Unable to locate IOAPIC Date: Wed, 18 Jun 2008 21:57:03 +0200 User-Agent: KMail/1.9.9 Cc: "Alexey Starikovskiy" , "Andrew Morton" , linux-kernel@vger.kernel.org, linux-next@vger.kernel.org, linux-acpi@vger.kernel.org, "Ingo Molnar" References: <200806051100.12885.dex@dragonslave.de> <200806152114.33007.dex@dragonslave.de> <86802c440806151220l358ca541s9d87fe2acc360e8@mail.gmail.com> In-Reply-To: <86802c440806151220l358ca541s9d87fe2acc360e8@mail.gmail.com> Mime-Version: 1.0 Content-Type: Multipart/Mixed; boundary="Boundary-00=_QiWWIoAB7KgDnKn" Message-Id: <200806182157.04120.dex@dragonslave.de> X-bounce-key: webpack.hosteurope.de;dex@dragonslave.de;1213819042;50259966; Sender: linux-kernel-owner@vger.kernel.org Precedence: bulk List-Id: X-Mailing-List: linux-kernel@vger.kernel.org --Boundary-00=_QiWWIoAB7KgDnKn Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Content-Disposition: inline Yinghai Lu wrote: > On Sun, Jun 15, 2008 at 12:14 PM, Daniel Exner wrote: > > Hi all, > > > > Yinghai Lu wrote: > >> >> To clarify myself: > >> >> 2.6.25.5: --> relatively fast no IOAPIC Errors in dmesg > >> >> 2.6.26-rc5: --> relatively no IOAPIC Errors in dmesg > >> >> 2.6.26-rc5 + git-acpi Patch: --> relatively no IOAPIC Errors in > >> >> dmesg 2.6.26-rc5 + linux-next snapshot 20080604 --> even slower than > >> >> before my ide Patch many "unable to locate IOAPIC" Errors > >> >> > >> >> > >> >> So I think the problem lies not in the acpi tree but somewhre else. > >> >> > >> >> Is it possible to tell git to explicitly _exclude_ a specific tree > >> >> while bisecting? > >> > >> can you check if the attached patch fix the problem? > >> it will not check entries before MP_intsrc_info... > > > > This fixed it, thanks :) > > > > Also maschine feels not as fast as with 2.6.25.x but noticeable faster :) > > > > I guss you no longer need the complete dmesg output? > > still need that... wonder why your irq routing have same entris from > your BIOS/ACPI? Again, sorry for the delay. I raised the Kernel buffer and added an output, done using rc6. No idea what you mean.. could you perhaps highlight the lines in my output? -- Greetings Daniel Exner --Boundary-00=_QiWWIoAB7KgDnKn Content-Type: text/plain; charset="iso-8859-1"; name="dmesg.rc6" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename="dmesg.rc6" Linux version 2.6.25-Laptop-fw6 (root@Joshua) (gcc version 4.3.1 (Frugalware Linux) ) #1 SMP PREEMPT Wed Jun 18 19:59:24 CEST 2008 PAT disabled. Not yet verified on this CPU type. BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 00000000000eee00 (reserved) BIOS-e820: 00000000000eee00 - 00000000000ef000 (ACPI NVS) BIOS-e820: 00000000000ef000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000000eff0000 (usable) BIOS-e820: 000000000eff0000 - 000000000f000000 (ACPI data) BIOS-e820: 000000000f000000 - 0000000010000000 (reserved) BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) 0MB HIGHMEM available. 239MB LOWMEM available. Entering add_active_range(0, 0, 61424) 0 entries of 256 used Zone PFN ranges: DMA 0 -> 4096 Normal 4096 -> 61424 HighMem 61424 -> 61424 Movable zone start PFN for each node early_node_map[1] active PFN ranges 0: 0 -> 61424 On node 0 totalpages: 61424 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 4064 pages, LIFO batch:0 Normal zone: 448 pages used for memmap Normal zone: 56880 pages, LIFO batch:15 HighMem zone: 0 pages used for memmap Movable zone: 0 pages used for memmap DMI 2.3 present. ACPI: RSDP 000F0090, 0014 (r0 TOSHIB) ACPI: RSDT 0EFF0000, 002C (r1 TOSHIB 750 970814 TASM 4010000) ACPI: FACP 0EFF0054, 0084 (r2 TOSHIB 750 970814 TASM 4010000) ACPI: DSDT 0EFF00D8, 41BA (r1 TOSHIB 1800 20010911 MSFT 1000007) ACPI: FACS 000EEE00, 0040 ACPI: BOOT 0EFF002C, 0028 (r1 TOSHIB 750 970814 TASM 4010000) ACPI: DMI detected: Toshiba ACPI: PM-Timer IO Port: 0xee08 Allocating PCI resources starting at 20000000 (gap: 10000000:eff80000) PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 PM: Registered nosave memory: 00000000000e0000 - 00000000000ee000 PM: Registered nosave memory: 00000000000ee000 - 00000000000ef000 PM: Registered nosave memory: 00000000000ef000 - 0000000000100000 SMP: Allowing 0 CPUs, 0 hotplug CPUs PERCPU: Allocating 37416 bytes of per cpu data NR_CPUS: 8, nr_cpu_ids: 1 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 60944 Kernel command line: root=/dev/hda2 ro quiet vga=792 resume=/dev/hda1 Local APIC disabled by BIOS -- you can enable it with "lapic" mapped APIC to ffffb000 (011ed000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 1024 (order: 10, 4096 bytes) Detected 1095.477 MHz processor. Console: colour dummy device 80x25 console [tty0] enabled Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) Memory: 235496k/245696k available (3056k kernel code, 9572k reserved, 1165k data, 600k init, 0k highmem) virtual kernel memory layout: fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xcf800000 - 0xff7fe000 ( 767 MB) lowmem : 0xc0000000 - 0xceff0000 ( 239 MB) .init : 0xc0526000 - 0xc05bc000 ( 600 kB) .data : 0xc03fc272 - 0xc051f790 (1165 kB) .text : 0xc0100000 - 0xc03fc272 (3056 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. CPA: page pool initialized 1 of 1 pages preallocated Calibrating delay using timer specific routine.. 2192.75 BogoMIPS (lpj=1096379) Security Framework initialized Capability LSM initialized Mount-cache hash table entries: 512 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 256K Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code Freeing SMP alternatives: 13k freed ACPI: Core revision 20080321 Parsing all Control Methods: Table [DSDT](id 0001) - 574 Objects with 53 Devices 152 Methods 5 Regions tbxface-0598 [00] tb_load_namespace : ACPI Tables successfully acquired ACPI: setting ELCR to 0200 (from 0a00) evxfevnt-0091 [00] enable : Transition to ACPI mode successful weird, boot CPU (#0) not listedby the BIOS. SMP motherboard not detected. Local APIC not detected. Using dummy APIC emulation. SMP disabled Brought up 1 CPUs Total of 1 processors activated (2192.75 BogoMIPS). CPU0 attaching NULL sched-domain. net_namespace: 652 bytes NET: Registered protocol family 16 No dock devices found. EISA bus registered ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xfe34a, last bus=5 PCI: Using configuration type 1 for base access Setting up standard PCI resources evgpeblk-0956 [00] ev_create_gpe_block : GPE 00 to 3F [_GPE] 8 regs on int 0x9 ACPI: EC: Look up EC in DSDT Completing Region/Field/Buffer/Package initialization:...................................... Initialized 2/5 Regions 0/0 Fields 16/16 Buffers 20/20 Packages (583 nodes) Initializing Device/Processor/Thermal objects by executing _INI methods:. Executed 1 _INI methods requiring 0 _STA executions (examined 57 objects) evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 3 Wake, Enabled 0 Runtime GPEs in this block ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using PIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:08.0: quirk: region ee00-ee3f claimed by ali7101 ACPI pci 0000:00:08.0: quirk: region ef00-ef1f claimed by ali7101 SMB ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 *11) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 *11) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 *11) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 *11) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 *11) ACPI: Power Resource [PFAN] (off) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 13 devices ACPI: ACPI bus type pnp unregistered PnPBIOS: Disabled by ACPI PNP SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default ACPI: RTC can wake from S4 system 00:00: iomem range 0x0-0x9ffff could not be reserved system 00:00: iomem range 0xe0000-0xeffff could not be reserved system 00:00: iomem range 0xf0000-0xfffff could not be reserved system 00:00: iomem range 0x100000-0xefeffff could not be reserved system 00:00: iomem range 0xeff0000-0xeffffff could not be reserved system 00:00: iomem range 0xf000000-0xfffffff could not be reserved system 00:00: iomem range 0xffe00000-0xffffffff could not be reserved system 00:08: ioport range 0x370-0x371 has been reserved system 00:08: ioport range 0x40b-0x40b has been reserved system 00:08: ioport range 0x480-0x48f has been reserved system 00:08: ioport range 0x4d0-0x4d1 has been reserved system 00:08: ioport range 0x4d6-0x4d6 has been reserved system 00:08: ioport range 0x6c0-0x6ff has been reserved system 00:08: ioport range 0xe000-0xe07f has been reserved system 00:08: ioport range 0xe080-0xe0ff has been reserved system 00:08: ioport range 0xe400-0xe47f has been reserved system 00:08: ioport range 0xe480-0xe4ff has been reserved system 00:08: ioport range 0xe800-0xe87f has been reserved system 00:08: ioport range 0xe880-0xe8ff has been reserved system 00:08: ioport range 0xec00-0xec7f has been reserved system 00:08: ioport range 0xec80-0xecff has been reserved system 00:08: ioport range 0xee00-0xee41 could not be reserved system 00:08: ioport range 0xee90-0xee9f has been reserved system 00:08: ioport range 0xeeac-0xeeac has been reserved system 00:08: ioport range 0xef00-0xef3f could not be reserved PCI: Bridge: 0000:00:01.0 IO window: disabled. MEM window: 0xf7f00000-0xfdffffff PREFETCH window: 0x0000000030000000-0x00000000300fffff PCI: Bus 2, cardbus bridge: 0000:00:11.0 IO window: 0x00001400-0x000014ff IO window: 0x00001800-0x000018ff PREFETCH window: 0x20000000-0x23ffffff MEM window: 0x24000000-0x27ffffff PCI: Bus 6, cardbus bridge: 0000:00:11.1 IO window: 0x00001c00-0x00001cff IO window: 0x00002000-0x000020ff PREFETCH window: 0x28000000-0x2bffffff MEM window: 0x2c000000-0x2fffffff PCI: Setting latency timer of device 0000:00:01.0 to 64 pci 0000:00:11.0: enabling device (0000 -> 0003) ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 PCI: setting IRQ 11 as level-triggered ACPI: PCI Interrupt 0000:00:11.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 pci 0000:00:11.1: enabling device (0000 -> 0003) ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11 ACPI: PCI Interrupt 0000:00:11.1[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11 NET: Registered protocol family 2 IP route cache hash table entries: 2048 (order: 1, 8192 bytes) TCP established hash table entries: 8192 (order: 4, 65536 bytes) TCP bind hash table entries: 8192 (order: 4, 65536 bytes) TCP: Hash tables configured (established 8192 bind 8192) TCP reno registered NET: Registered protocol family 1 checking if image is initramfs...it isn't (bad gzip magic numbers); looks like an initrd Freeing initrd memory: 2000k freed Simple Boot Flag at 0x7c set to 0x1 apm: BIOS version 1.2 Flags 0x02 (Driver version 1.16ac) apm: overridden by ACPI. audit: initializing netlink socket (disabled) type=2000 audit(1213824587.296:1): initialized VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) SGI XFS with ACLs, security attributes, large block numbers, no debug enabled SGI XFS Quota Management subsystem msgmni has been set to 464 io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci 0000:00:07.0: Activating ISA DMA hang workarounds pci 0000:00:0a.0: Firmware left e100 interrupts enabled; disabling pci 0000:01:00.0: Boot video device pci_hotplug: PCI Hot Plug PCI Core version: 0.5 vesafb: framebuffer at 0xfc000000, mapped to 0xcf880000, using 6144k, total 16384k vesafb: mode is 1024x768x32, linelength=4096, pages=4 vesafb: protected mode interface info at c000:77f8 vesafb: pmi: set display start = c00c7819, set palette = c00c787c vesafb: scrolling: redraw vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0 Console: switching to colour frame buffer device 128x48 fb0: VESA VGA frame buffer device isapnp: Scanning for PnP cards... Switched to high resolution mode on CPU 0 isapnp: No Plug & Play device found Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 brd: module loaded Uniform Multi-Platform E-IDE driver ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ALI15X3: IDE controller (0x10b9:0x5229 rev 0xc3) at PCI slot 0000:00:04.0 ACPI: Unable to derive IRQ for device 0000:00:04.0 ALI15X3: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xeff0-0xeff7 ide1: BM-DMA at 0xeff8-0xefff Probing IDE interface ide0... hda: HITACHI_DK23CA-20, ATA DISK drive hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4 hda: UDMA/66 mode selected Probing IDE interface ide1... hdc: TOSHIBA DVD-ROM SD-C2502, ATAPI CD/DVD-ROM drive hdc: host max PIO5 wanted PIO255(auto-tune) selected PIO4 hdc: UDMA/33 mode selected ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 ide_generic: I/O resource 0x1F0-0x1F7 not free. ide_generic: I/O resource 0x170-0x177 not free. hda: max request size: 128KiB hda: 39070080 sectors (20003 MB) w/2048KiB Cache, CHS=38760/16/63 hda: cache flushes not supported hda: hda1 hda2 hda3 hdc: ATAPI 24X DVD-ROM drive, 128kB Cache Uniform CD-ROM driver Revision: 3.20 Driver 'sd' needs updating - please use bus_type methods Driver 'sr' needs updating - please use bus_type methods PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard as /class/input/input0 md: raid0 personality registered for level 0 md: raid1 personality registered for level 1 EISA: Probing bus 0 at eisa.0 cpuidle: using governor ladder cpuidle: using governor menu usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver Advanced Linux Sound Architecture Driver Version 1.0.16. ALSA device list: No soundcards found. TCP bic registered Initializing XFRM netlink socket NET: Registered protocol family 17 Using IPI No-Shortcut mode input: PS/2 Mouse as /class/input/input1 input: AlpsPS/2 ALPS GlidePoint as /class/input/input2 md: Autodetecting RAID arrays. md: Scanned 0 and added 0 devices. md: autorun ... md: ... autorun DONE. RAMDISK: ext2 filesystem found at block 0 RAMDISK: Loading 2000KiB [1 disk] into ram disk... |/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|done. VFS: Mounted root (ext2 filesystem). kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Trying to move old root to /initrd ... /initrd does not exist. Ignored. Unmounting old root Trying to free ramdisk memory ... okay Freeing unused kernel memory: 600k freed EXT3 FS on hda2, internal journal Linux agpgart interface v0.103 agpgart: Detected ALi M1644 chipset ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver agpgart: AGP aperture is 64M @ 0xf0000000 ohci_hcd 0000:00:02.0: enabling device (0000 -> 0002) ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 11 ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LNKG] -> GSI 11 (level, low) -> IRQ 11 ohci_hcd 0000:00:02.0: OHCI Host Controller ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1 ohci_hcd 0000:00:02.0: irq 11, io mem 0x30100000 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 alim7101_wdt: Steve Hill . alim7101_wdt: Detected old alim7101 revision 'a1d'. If this is a cobalt board, set the 'use_gpio' module parameter. e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI e100: Copyright(c) 1999-2006 Intel Corporation ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11 pci 0000:00:08.0: enabling device (0000 -> 0001) ALi_M1535: initialized. timeout=60 sec (nowayout=0) input: Power Button (FF) as /class/input/input3 ACPI: Power Button (FF) [PWRF] input: Lid Switch as /class/input/input4 ACPI: Lid Switch [LID] ACPI: CPU0 (power states: C1[C1] C2[C2]) ACPI: ACPI0007:00 is registered as cooling_device0 e100: eth0: e100_probe: addr 0xf7efe000, irq 11, MAC addr 00:00:39:32:e4:aa ali15x3_smbus 0000:00:08.0: ALI15X3_smb region uninitialized - upgrade BIOS or use force_addr=0xaddr ali15x3_smbus 0000:00:08.0: ALI15X3 not detected, module not inserted. Yenta: CardBus bridge found at 0000:00:11.0 [1179:0001] ACPI: AC Adapter [ADP1] (on-line) ACPI: LNXTHERM:01 is registered as thermal_zone0 ACPI: Thermal Zone [THRM] (58 C) Yenta: ISA IRQ mask 0x04b8, PCI irq 11 Socket status: 30000020 Yenta: CardBus bridge found at 0000:00:11.1 [1179:0001] Yenta: ISA IRQ mask 0x04b8, PCI irq 11 Socket status: 30000007 ALI 5451 0000:00:06.0: enabling device (0000 -> 0003) ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11 ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [LNKH] -> GSI 11 (level, low) -> IRQ 11 eepro100.c:v1.09j-t 9/29/99 Donald Becker eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin and others pccard: CardBus card inserted into slot 0 alim7101_wdt: Steve Hill . alim7101_wdt: Detected old alim7101 revision 'a1d'. If this is a cobalt board, set the 'use_gpio' module parameter. input: Video Bus as /class/input/input5 ACPI: Video Device [VGA] (multi-head: yes rom: yes post: no) ACPI: Transitioning device [FAN] to D3 ACPI: PNP0C0B:00 is registered as cooling_device1 ACPI: Fan [FAN] (off) ACPI: Battery Slot [BAT1] (battery present) toshiba_acpi: Toshiba Laptop ACPI Extras version 0.18 toshiba_acpi: HCI method: \_SB_.VALD.GHCI input: PC Speaker as /class/input/input6 rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one year NET: Registered protocol family 23 Detected unconfigured Toshiba laptop with ALi ISA bridge SMSC IrDA chip, pre-configuring device. Activated ALi 1533 ISA bridge port 0x02e8. Activated ALi 1533 ISA bridge port 0x02f8. found SMC SuperIO Chip (devid=0x5a rev=00 base=0x002e): LPC47N227 smsc_superio_flat(): IrDA not enabled smsc_superio_flat(): fir: 0x2f8, sir: 0x2e8, dma: 03, irq: 7, mode: 0x02 SMsC IrDA Controller found IrCC version 2.0, firport 0x2f8, sirport 0x2e8 dma=3, irq=7 No transceiver found. Defaulting to Fast pin select IrDA: Registered device irda0 parport_pc 00:0c: activated parport_pc 00:0c: reported by Plug and Play ACPI parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE] ath5k_pci 0000:02:00.0: enabling device (0000 -> 0002) ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 ath5k_pci 0000:02:00.0: registered as 'phy0' cs: IO port probe 0x100-0x3af: excluding 0x200-0x207 0x220-0x22f 0x330-0x337 0x388-0x38f cs: IO port probe 0x3e0-0x4ff: clean. cs: IO port probe 0x100-0x3af: excluding 0x200-0x207 0x220-0x22f 0x330-0x337 0x388-0x38f cs: IO port probe 0x3e0-0x4ff: clean. cs: IO port probe 0x820-0x8ff: clean. cs: IO port probe 0xc00-0xcf7: clean. cs: IO port probe 0xa00-0xaff: clean. cs: IO port probe 0x820-0x8ff: clean. cs: IO port probe 0xc00-0xcf7: clean. cs: IO port probe 0xa00-0xaff: clean. ppdev: user-space parallel port driver phy0: Selected rate control algorithm 'pid' Marking TSC unstable due to: TSC halts in idle. ath5k phy0: Atheros AR2414 chip found (MAC: 0x79, PHY: 0x45) udev: renamed network interface wlan0 to ath0 alim7101_wdt: Steve Hill . alim7101_wdt: Detected old alim7101 revision 'a1d'. If this is a cobalt board, set the 'use_gpio' module parameter. alim7101_wdt: Steve Hill . alim7101_wdt: Detected old alim7101 revision 'a1d'. If this is a cobalt board, set the 'use_gpio' module parameter. EXT3 FS on hda2, internal journal lp0: using parport0 (interrupt-driven). lp0: console ready loop: module loaded fuse init (API version 7.9) Toshiba System Management Mode driver v1.11 26/9/2001 kjournald starting. Commit interval 5 seconds EXT3 FS on hda3, internal journal EXT3-fs: mounted filesystem with ordered data mode. Adding 530104k swap on /dev/hda1. Priority:-1 extents:1 across:530104k phy0: HW CONFIG: freq=2412 ip_tables: (C) 2000-2006 Netfilter Core Team nf_conntrack version 0.5.0 (4096 buckets, 16384 max) tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky NET: Registered protocol family 10 lo: Disabled Privacy Extensions ADDRCONF(NETDEV_UP): eth0: link is not ready Bluetooth: Core ver 2.11 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP ver 2.9 Bluetooth: L2CAP socket layer initialized Bluetooth: BNEP (Ethernet Emulation) ver 1.2 Bluetooth: BNEP filters: protocol multicast Bridge firewalling registered pan0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature. Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM ver 1.8 ttyS0: LSR safety check engaged! warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use) --Boundary-00=_QiWWIoAB7KgDnKn-- -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/