lkml.org 
[lkml]   [2008]   [Jun]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
SubjectRe: [PATCH 3/4] ide-pmac: add ->init_dev method (take 2)
Date
On Tuesday 17 June 2008, Stephen Rothwell wrote:
> Hi Bart,
>
> On Mon, 16 Jun 2008 21:24:47 +0200 Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> wrote:
> >
> > +static void pmac_ide_init_dev(ide_drive_t *drive)
> > +{
> > + ide_hwif_t *hwif = drive->hwif;
> > + pmac_ide_hwif_t *pmif =
> > + (pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent);
> > +
> > + if (pmif->mediabay) {
> > +#ifdef CONFIG_PMAC_MEDIABAY
> > + if (check_media_bay(np->parent, MB_CD) == -ENODEV)
> ^^
> "np" doesn't exist here.

uh, it should be pmif->node there... take 3...

From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Subject: [PATCH] ide-pmac: add ->init_dev method (take 3)

v2/3:
* Build fixes from Stephen Rothwell.

There should be no functional changes caused by this patch.

Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
drivers/ide/ppc/pmac.c | 27 ++++++++++++++++++---------
1 file changed, 18 insertions(+), 9 deletions(-)

Index: b/drivers/ide/ppc/pmac.c
===================================================================
--- a/drivers/ide/ppc/pmac.c
+++ b/drivers/ide/ppc/pmac.c
@@ -941,7 +941,23 @@ static u8 pmac_ide_cable_detect(ide_hwif
return ATA_CBL_PATA40;
}

+static void pmac_ide_init_dev(ide_drive_t *drive)
+{
+ ide_hwif_t *hwif = drive->hwif;
+ pmac_ide_hwif_t *pmif =
+ (pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent);
+
+ if (pmif->mediabay) {
+#ifdef CONFIG_PMAC_MEDIABAY
+ if (check_media_bay(pmif->node->parent, MB_CD) == -ENODEV)
+ return;
+#endif
+ drive->noprobe = 1;
+ }
+}
+
static const struct ide_port_ops pmac_ide_ata6_port_ops = {
+ .init_dev = pmac_ide_init_dev,
.set_pio_mode = pmac_ide_set_pio_mode,
.set_dma_mode = pmac_ide_set_dma_mode,
.selectproc = pmac_ide_kauai_selectproc,
@@ -949,6 +965,7 @@ static const struct ide_port_ops pmac_id
};

static const struct ide_port_ops pmac_ide_ata4_port_ops = {
+ .init_dev = pmac_ide_init_dev,
.set_pio_mode = pmac_ide_set_pio_mode,
.set_dma_mode = pmac_ide_set_dma_mode,
.selectproc = pmac_ide_selectproc,
@@ -956,6 +973,7 @@ static const struct ide_port_ops pmac_id
};

static const struct ide_port_ops pmac_ide_port_ops = {
+ .init_dev = pmac_ide_init_dev,
.set_pio_mode = pmac_ide_set_pio_mode,
.set_dma_mode = pmac_ide_set_dma_mode,
.selectproc = pmac_ide_selectproc,
@@ -1065,15 +1083,6 @@ pmac_ide_setup_device(pmac_ide_hwif_t *p
hwif->index, model_name[pmif->kind], pmif->aapl_bus_id,
pmif->mediabay ? " (mediabay)" : "", hwif->irq);

- if (pmif->mediabay) {
-#ifdef CONFIG_PMAC_MEDIABAY
- if (check_media_bay(np->parent, MB_CD) == -ENODEV)
- break;
-#endif
- hwif->drives[0].noprobe = 1;
- hwif->drives[1].noprobe = 1;
- }
-
idx[0] = hwif->index;

ide_device_add(idx, &d);

\
 
 \ /
  Last update: 2008-06-17 22:47    [W:0.077 / U:0.092 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site