lkml.org 
[lkml]   [2008]   [May]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectEDAC i5000 MC0: NON-FATAL ERRORS
   I am seeing the following errors on a Fedora 7 x86_64 linux box,
running on a Tyan Tempest i5000XL motherboard, after upgrading from
kernel-2.6.25-14.fc9.x86_64 to kernel-2.6.25.3-18.fc9.x86_64...

May 25 04:30:56 fourier kernel: EDAC i5000 MC0: NON-FATAL ERRORS Found!!! 1st NON-FATAL Err Reg= 0x10000
May 25 04:30:56 fourier kernel: EDAC MC0: CE row 1, channel 0, label "": (Branch=0 DRAM-Bank=3 RDWR=Read RAS=14339 CAS=672, CE Err=0x10000)

These messages occur about once an hour and are always for the same DRAM-Bank.
I've not been able to find any memory errors when running memtest86 with or
without ECC checking being enabled. Are there any known issues with the
EDAC support in the kernel that might cause false positives like this?
The errors are always marked as non-fatal and are for reads. Also, does
anyone know how this code numbers ram banks? Is the first ram bank considered
0 or 1 by this code? Thanks in advance for any clarifications.
Jack


\
 
 \ /
  Last update: 2008-05-30 19:05    [W:0.022 / U:1.868 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site