lkml.org 
[lkml]   [2008]   [May]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: 2.6.24.X: SATA/AHCI related boot delay. - not with 2.6.24.3
Date
On Freitag, 30. Mai 2008, Tejun Heo wrote:
> Hello,
>
> Hemmann, Volker Armin wrote:
> > -AHCI+nomsi: boots fine. Works fine. But: I still can not enable ncq
> > -AHCI+msi: the usual. No harddisks found, waiting for the timeouts, then
> > kernel panic because of missing root.
> >
> > -NON-RAID/IDE+msi: works fine. No delays. No NCQ (not surprising since
> > mobos handbook says that AHCI mode is required).
> > -NON-RAID/IDE+nomsi: see above.
>
> So, sans NCQ, the only remaining issue is MSI, right? Peer Chen, please
> lemme know which controllers are affected by this MSI problem and where
> the problem lies.

this is correct.

> The controller is not reporting NCQ capability in its cap register
> (flags: line contains ncq if the controller is), so NCQ is not enabled.

ah, I thought all AHCI chipsets support NCQ (and the board's handbook lists it
as feature) thanks for the explanation.

Glück Auf,
Volker
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2008-05-30 12:47    [W:0.088 / U:0.252 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site