Messages in this thread | | | Date | Thu, 29 May 2008 17:52:26 +0200 | From | Jean Delvare <> | Subject | Re: [PATCHv2] i2c: adds support for i2c bus on Freescale CPM1/CPM2 controllers |
| |
On Wed, 21 May 2008 18:39:42 +0200, Jochen Friedrich wrote: > This driver uses the port of 2.4 code from Vitaly Bordug > <vitb@kernel.crashing.org> and the actual algorithm used by the i2c > driver of the DBox code on cvs.tuxboc.org from Felix Domke > (tmbinc@gmx.net) and Gillem (htoa@gmx.net) converted to an > of_platform_driver. Tested on CPM1 (MPC823 on dbox2 hardware) and > CPM2 (MPC8272). > > Signed-off-by: Jochen Friedrich <jochen@scram.de> > --- > drivers/i2c/busses/Kconfig | 10 + > drivers/i2c/busses/Makefile | 1 + > drivers/i2c/busses/i2c-cpm.c | 745 ++++++++++++++++++++++++++++++++++++++++++ > 3 files changed, 756 insertions(+), 0 deletions(-) > create mode 100644 drivers/i2c/busses/i2c-cpm.c > > Changes since last version: > - change bus-frequency -> clock-frequency to comply to OF standard. >
Applied, thanks. And thanks a lot to Wolfram for the review :)
-- Jean Delvare
| |