lkml.org 
[lkml]   [2008]   [May]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    Date
    From
    Subject[PATCH 1/4] spi: Change modalias from a pointer to a character array
    From: Grant Likely <grant.likely@secretlab.ca>

    Currently, 'modalias' in the spi_device structure is a 'const char *'.
    The spi_new_device() function fills in the modalias value from a passed
    in spi_board_info data block. Since it is a pointer copy, the new
    spi_device remains dependent on the spi_board_info structure after the
    new spi_device is registered (no other fields in spi_device directly
    depend on the spi_board_info structure; all of the other data is copied).

    This causes a problem when dynamically propulating the list of attached
    SPI devices. For example, in arch/powerpc, the list of SPI devices can
    be populated from data in the device tree. With the current code, the
    device tree adapter must kmalloc() a new spi_board_info structure for
    each new SPI device it finds in the device tree, and there is no simple
    mechanism in place for keeping track of these allocations.

    This patch changes modalias from a 'const char *' to a fixed char array.
    By copying the modalias string instead of referencing it, the dependency
    on the spi_board_info structure is eliminated and an outside caller does
    not need to maintain a separate spi_board_info allocation for each device.

    If searched through the code to the best of my ability for any references
    to modalias which may be affected by this change and haven't found anything.
    It has been tested with the lite5200b platform in arch/powerpc.

    Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
    ---

    drivers/spi/spi.c | 2 +-
    include/linux/spi/spi.h | 2 +-
    2 files changed, 2 insertions(+), 2 deletions(-)

    diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c
    index 1ad12af..bdf1b70 100644
    --- a/drivers/spi/spi.c
    +++ b/drivers/spi/spi.c
    @@ -229,7 +229,7 @@ struct spi_device *spi_new_device(struct spi_master *master,
    proxy->max_speed_hz = chip->max_speed_hz;
    proxy->mode = chip->mode;
    proxy->irq = chip->irq;
    - proxy->modalias = chip->modalias;
    + strncpy(proxy->modalias, chip->modalias, KOBJ_NAME_LEN);

    snprintf(proxy->dev.bus_id, sizeof proxy->dev.bus_id,
    "%s.%u", master->dev.bus_id,
    diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h
    index 387e428..38a080b 100644
    --- a/include/linux/spi/spi.h
    +++ b/include/linux/spi/spi.h
    @@ -82,7 +82,7 @@ struct spi_device {
    int irq;
    void *controller_state;
    void *controller_data;
    - const char *modalias;
    + char modalias[KOBJ_NAME_LEN];

    /*
    * likely need more hooks for more protocol options affecting how


    \
     
     \ /
      Last update: 2008-05-16 21:39    [W:5.420 / U:0.112 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site