lkml.org 
[lkml]   [2008]   [Apr]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
Subjectlinux 2.6.25-rc8-00166-g6fdf5e6 BUG
Hi!

This morning, while closing KMail from the KDE desktop to
shutdown the machine, I got this:

[===snip===]

[145026.240307] general protection fault: 0000 [1] PREEMPT SMP
[145026.240313] CPU 0
[145026.240315] Modules linked in:
[145026.240318] Pid: 32546, comm: kmail Not tainted
2.6.25-rc8-00166-g6fdf5e6 #1
[145026.240320] RIP: 0010:[<ffffffff80275274>] [<ffffffff80275274>]
set_page_dirty+0x34/0x90
[145026.240327] RSP: 0018:ffff810004ba9d98 EFLAGS: 00010206
[145026.240328] RAX: 6b636f6c5f747369 RBX: ffff81000779cae0 RCX:
ffff8100010046e0
[145026.240330] RDX: ffffffff802c08d0 RSI: 8000000033d60067 RDI:
ffffe20000b56d00
[145026.240332] RBP: 000000000115c000 R08: 0000000000000006 R09:
0000000000000001
[145026.240334] R10: 0000000000000002 R11: 000000000000031b R12:
ffffe20000b56d00
[145026.240335] R13: 0000000001200000 R14: 0000000033d60067 R15:
0000000000000000
[145026.240338] FS: 0000000000000000(0000) GS:ffffffff80993000(0000)
knlGS:0000000000000000
[145026.240340] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[145026.240341] CR2: 00007f695e7aa3f0 CR3: 0000000000201000 CR4:
00000000000006e0
[145026.240343] DR0: 0000000000000000 DR1: 0000000000000000 DR2:
0000000000000000
[145026.240345] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7:
0000000000000400
[145026.240347] Process kmail (pid: 32546, threadinfo ffff810004ba8000,
task ffff81002137a000)
[145026.240348] Stack: 0000000001155000 ffff81000779cae0
000000000115c000 ffffffff8027e271
[145026.240353] 0000000000000000 0000000001574fff 0000000000000000
ffff810004ba9ea8
[145026.240357] ffffffffffffffff 0000000000000000 ffff81003af86bd0
ffff810004ba9eb0
[145026.240360] Call Trace:
[145026.240364] [<ffffffff8027e271>] ? unmap_vmas+0x611/0x800
[145026.240367] [<ffffffff8028252a>] ? exit_mmap+0x8a/0x130
[145026.240370] [<ffffffff80236957>] ? mmput+0x57/0xe0
[145026.240373] [<ffffffff8023cc8a>] ? do_exit+0x19a/0x7e0
[145026.240377] [<ffffffff807079fb>] ? lockdep_sys_exit_thunk+0x35/0x67
[145026.240381] [<ffffffff803f6281>] ? __up_read+0x21/0xb0
[145026.240383] [<ffffffff8023d303>] ? do_group_exit+0x33/0xa0
[145026.240386] [<ffffffff8020b56b>] ? system_call_after_swapgs+0x7b/0x80
[145026.240387]
[145026.240388]
[145026.240389] Code: 48 8b 47 18 66 85 d2 78 70 a8 01 75 50 48 85 c0 74
4b 48 8b 80 b8 00 00 00 48 c7 c2 d0 08 2c 80 48 8b 40 20 48 85 c0 48 0f
44 c2 <ff> d0 85 c0 89 c5 74 21 65 48 8b 34 25 00 00 00 00 48 81 c6 d0
[145026.240416] RIP [<ffffffff80275274>] set_page_dirty+0x34/0x90
[145026.240419] RSP <ffff810004ba9d98>
[145026.240423] ---[ end trace 6b50f2d712edcd7a ]---
[145026.240424] Fixing recursive fault but reboot is needed!
[145026.240426] BUG: scheduling while atomic: kmail/32546/0x00000003
[145026.240428] INFO: lockdep is turned off.
[145026.240430] Pid: 32546, comm: kmail Tainted: G D
2.6.25-rc8-00166-g6fdf5e6 #1
[145026.240431]
[145026.240432] Call Trace:
[145026.240435] [<ffffffff80705a26>] thread_return+0x34c/0x576
[145026.240437] [<ffffffff80239469>] release_console_sem+0x49/0x200
[145026.240439] [<ffffffff80239e5e>] printk+0x4e/0x60
[145026.240441] [<ffffffff8023d29e>] do_exit+0x7ae/0x7e0
[145026.240444] [<ffffffff8022e223>] __wake_up+0x43/0x70
[145026.240446] [<ffffffff8020c8e7>] oops_end+0x87/0x90
[145026.240448] [<ffffffff8070884d>] error_exit+0x0/0x9a
[145026.240452] [<ffffffff802c08d0>] __set_page_dirty_buffers+0x0/0xc0
[145026.240454] [<ffffffff80275274>] set_page_dirty+0x34/0x90
[145026.240457] [<ffffffff8027b6f8>] __dec_zone_state+0x18/0x80
[145026.240459] [<ffffffff8027e271>] unmap_vmas+0x611/0x800
[145026.240461] [<ffffffff8028252a>] exit_mmap+0x8a/0x130
[145026.240463] [<ffffffff80236957>] mmput+0x57/0xe0
[145026.240466] [<ffffffff8023cc8a>] do_exit+0x19a/0x7e0
[145026.240468] [<ffffffff807079fb>] lockdep_sys_exit_thunk+0x35/0x67
[145026.240470] [<ffffffff803f6281>] __up_read+0x21/0xb0
[145026.240473] [<ffffffff8023d303>] do_group_exit+0x33/0xa0
[145026.240475] [<ffffffff8020b56b>] system_call_after_swapgs+0x7b/0x80
[145026.240476]

[===end-snip===]

Should I open a bugreport at bugzilla.kernel.org with this,
or should I try latest git tree?

Kernel config (gzipped) used, full dmesg output plus
lspci -vv (as root) attached.

P.S. I'm not subscribed to linux-kernel@vger.kernel.org.
--
Plamen Petrov, network & system administrator
Filial - Silistra
RU "Angel Kantchev"
http://fs.ru.acad.bg/
--------------------------------
this message is UTF8 encoded

[unhandled content-type:application/octet-stream][ 0.000000] Linux version 2.6.25-rc8-00166-g6fdf5e6 (carpo@nomad64) (gcc version 4.1.2) #1 SMP PREEMPT Sat Apr 5 01:32:17 EEST 2008
[ 0.000000] Command line: ro root=/dev/sda2
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003ffb0000 (usable)
[ 0.000000] BIOS-e820: 000000003ffb0000 - 000000003ffc0000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003ffc0000 - 000000003fff0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003fff0000 - 0000000040000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)
[ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 256 used
[ 0.000000] Entering add_active_range(0, 256, 262064) 1 entries of 256 used
[ 0.000000] end_pfn_map = 1048576
[ 0.000000] DMI present.
[ 0.000000] ACPI: RSDP 000F7E10, 0014 (r0 ACPIAM)
[ 0.000000] ACPI: RSDT 3FFB0000, 0038 (r1 A M I OEMRSDT 7000725 MSFT 97)
[ 0.000000] ACPI: FACP 3FFB0200, 0084 (r2 A M I OEMFACP 7000725 MSFT 97)
[ 0.000000] ACPI: DSDT 3FFB0450, 4AED (r1 4CDVT 4CDVT191 191 INTL 2002026)
[ 0.000000] ACPI: FACS 3FFC0000, 0040
[ 0.000000] ACPI: APIC 3FFB0390, 0078 (r1 A M I OEMAPIC 7000725 MSFT 97)
[ 0.000000] ACPI: MCFG 3FFB0410, 003C (r1 A M I OEMMCFG 7000725 MSFT 97)
[ 0.000000] ACPI: OEMB 3FFC0040, 0051 (r1 A M I AMI_OEM 7000725 MSFT 97)
[ 0.000000] ACPI: HPET 3FFB4F40, 0038 (r1 A M I OEMHPET 7000725 MSFT 97)
[ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 256 used
[ 0.000000] Entering add_active_range(0, 256, 262064) 1 entries of 256 used
[ 0.000000] early res: 0 [0-fff] BIOS data page
[ 0.000000] early res: 1 [6000-7fff] SMP_TRAMPOLINE
[ 0.000000] early res: 2 [200000-b9b71f] TEXT DATA BSS
[ 0.000000] early res: 3 [9fc00-a0bff] EBDA
[ 0.000000] early res: 4 [8000-afff] PGTABLE
[ 0.000000] [ffffe20000000000-ffffe200001fffff] PMD ->ffff810001200000 on node 0
[ 0.000000] [ffffe20000200000-ffffe200003fffff] PMD ->ffff810001600000 on node 0
[ 0.000000] [ffffe20000400000-ffffe200005fffff] PMD ->ffff810001a00000 on node 0
[ 0.000000] [ffffe20000600000-ffffe200007fffff] PMD ->ffff810001e00000 on node 0
[ 0.000000] [ffffe20000800000-ffffe200009fffff] PMD ->ffff810002200000 on node 0
[ 0.000000] [ffffe20000a00000-ffffe20000bfffff] PMD ->ffff810002600000 on node 0
[ 0.000000] [ffffe20000c00000-ffffe20000dfffff] PMD ->ffff810002a00000 on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] DMA32 4096 -> 1048576
[ 0.000000] Normal 1048576 -> 1048576
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0 -> 159
[ 0.000000] 0: 256 -> 262064
[ 0.000000] On node 0 totalpages: 261967
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 2468 pages reserved
[ 0.000000] DMA zone: 1475 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 3526 pages used for memmap
[ 0.000000] DMA32 zone: 254442 pages, LIFO batch:31
[ 0.000000] Normal zone: 0 pages used for memmap
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 (Bootup-CPU)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] Processor #1
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IOAPIC (id[0x03] address[0xfecc0000] gsi_base[24])
[ 0.000000] IOAPIC[1]: apic_id 3, address 0xfecc0000, GSI 24-47
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Setting APIC routing to flat
[ 0.000000] ACPI: HPET id: 0x11068201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:bee00000)
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] PERCPU: Allocating 43012 bytes of per cpu data
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 255917
[ 0.000000] Kernel command line: ro root=/dev/sda2
[ 0.000000] Initializing CPU#0
[ 0.000000] Preemptible RCU implementation.
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] TSC calibrated against PM_TIMER
[ 0.000002] time.c: Detected 2419.823 MHz processor.
[ 0.002136] Console: colour VGA+ 80x25
[ 0.002140] console [tty0] enabled
[ 0.010000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[ 0.010000] ... MAX_LOCKDEP_SUBCLASSES: 8
[ 0.010000] ... MAX_LOCK_DEPTH: 48
[ 0.010000] ... MAX_LOCKDEP_KEYS: 2048
[ 0.010000] ... CLASSHASH_SIZE: 1024
[ 0.010000] ... MAX_LOCKDEP_ENTRIES: 8192
[ 0.010000] ... MAX_LOCKDEP_CHAINS: 16384
[ 0.010000] ... CHAINHASH_SIZE: 8192
[ 0.010000] memory used by lock dependency info: 1648 kB
[ 0.010000] per task-struct memory footprint: 2688 bytes
[ 0.010000] ------------------------
[ 0.010000] | Locking API testsuite:
[ 0.010000] ----------------------------------------------------------------------------
[ 0.010000] | spin |wlock |rlock |mutex | wsem | rsem |
[ 0.010000] --------------------------------------------------------------------------
[ 0.010000] A-A deadlock:failed|failed| ok |failed|failed|failed|
[ 0.010000] A-B-B-A deadlock:failed|failed| ok |failed|failed|failed|
[ 0.010000] A-B-B-C-C-A deadlock:failed|failed| ok |failed|failed|failed|
[ 0.010000] A-B-C-A-B-C deadlock:failed|failed| ok |failed|failed|failed|
[ 0.010000] A-B-B-C-C-D-D-A deadlock:failed|failed| ok |failed|failed|failed|
[ 0.010000] A-B-C-D-B-D-D-A deadlock:failed|failed| ok |failed|failed|failed|
[ 0.010000] A-B-C-D-B-C-D-A deadlock:failed|failed| ok |failed|failed|failed|
[ 0.010000] double unlock: ok | ok |failed| ok |failed|failed|
[ 0.010000] initialize held:failed|failed|failed|failed|failed|failed|
[ 0.010000] bad unlock order: ok | ok | ok | ok | ok | ok |
[ 0.010000] --------------------------------------------------------------------------
[ 0.010000] recursive read-lock: | ok | |failed|
[ 0.010000] recursive read-lock #2: | ok | |failed|
[ 0.010000] mixed read-write-lock: |failed| |failed|
[ 0.010000] mixed write-read-lock: |failed| |failed|
[ 0.010000] --------------------------------------------------------------------------
[ 0.010000] hard-irqs-on + irq-safe-A/12:failed|failed| ok |
[ 0.010000] soft-irqs-on + irq-safe-A/12:failed|failed| ok |
[ 0.010000] hard-irqs-on + irq-safe-A/21:failed|failed| ok |
[ 0.010000] soft-irqs-on + irq-safe-A/21:failed|failed| ok |
[ 0.010000] sirq-safe-A => hirqs-on/12:failed|failed| ok |
[ 0.010000] sirq-safe-A => hirqs-on/21:failed|failed| ok |
[ 0.010000] hard-safe-A + irqs-on/12:failed|failed| ok |
[ 0.010000] soft-safe-A + irqs-on/12:failed|failed| ok |
[ 0.010000] hard-safe-A + irqs-on/21:failed|failed| ok |
[ 0.010000] soft-safe-A + irqs-on/21:failed|failed| ok |
[ 0.010000] hard-safe-A + unsafe-B #1/123:failed|failed| ok |
[ 0.010000] soft-safe-A + unsafe-B #1/123:failed|failed| ok |
[ 0.010000] hard-safe-A + unsafe-B #1/132:failed|failed| ok |
[ 0.010000] soft-safe-A + unsafe-B #1/132:failed|failed| ok |
[ 0.010000] hard-safe-A + unsafe-B #1/213:failed|failed| ok |
[ 0.010000] soft-safe-A + unsafe-B #1/213:failed|failed| ok |
[ 0.010000] hard-safe-A + unsafe-B #1/231:failed|failed| ok |
[ 0.010000] soft-safe-A + unsafe-B #1/231:failed|failed| ok |
[ 0.010000] hard-safe-A + unsafe-B #1/312:failed|failed| ok |
[ 0.010000] soft-safe-A + unsafe-B #1/312:failed|failed| ok |
[ 0.010000] hard-safe-A + unsafe-B #1/321:failed|failed| ok |
[ 0.010000] soft-safe-A + unsafe-B #1/321:failed|failed| ok |
[ 0.010000] hard-safe-A + unsafe-B #2/123:failed|failed| ok |
[ 0.010000] soft-safe-A + unsafe-B #2/123:failed|failed| ok |
[ 0.010000] hard-safe-A + unsafe-B #2/132:failed|failed| ok |
[ 0.010000] soft-safe-A + unsafe-B #2/132:failed|failed| ok |
[ 0.010000] hard-safe-A + unsafe-B #2/213:failed|failed| ok |
[ 0.010000] soft-safe-A + unsafe-B #2/213:failed|failed| ok |
[ 0.010000] hard-safe-A + unsafe-B #2/231:failed|failed| ok |
[ 0.010000] soft-safe-A + unsafe-B #2/231:failed|failed| ok |
[ 0.010000] hard-safe-A + unsafe-B #2/312:failed|failed| ok |
[ 0.010000] soft-safe-A + unsafe-B #2/312:failed|failed| ok |
[ 0.010000] hard-safe-A + unsafe-B #2/321:failed|failed| ok |
[ 0.010000] soft-safe-A + unsafe-B #2/321:failed|failed| ok |
[ 0.010000] hard-irq lock-inversion/123:failed|failed| ok |
[ 0.010000] soft-irq lock-inversion/123:failed|failed| ok |
[ 0.010000] hard-irq lock-inversion/132:failed|failed| ok |
[ 0.010000] soft-irq lock-inversion/132:failed|failed| ok |
[ 0.010000] hard-irq lock-inversion/213:failed|failed| ok |
[ 0.010000] soft-irq lock-inversion/213:failed|failed| ok |
[ 0.010000] hard-irq lock-inversion/231:failed|failed| ok |
[ 0.010000] soft-irq lock-inversion/231:failed|failed| ok |
[ 0.010000] hard-irq lock-inversion/312:failed|failed| ok |
[ 0.010000] soft-irq lock-inversion/312:failed|failed| ok |
[ 0.010000] hard-irq lock-inversion/321:failed|failed| ok |
[ 0.010000] soft-irq lock-inversion/321:failed|failed| ok |
[ 0.010000] hard-irq read-recursion/123: ok |
[ 0.010000] soft-irq read-recursion/123: ok |
[ 0.010000] hard-irq read-recursion/132: ok |
[ 0.010000] soft-irq read-recursion/132: ok |
[ 0.010000] hard-irq read-recursion/213: ok |
[ 0.010000] soft-irq read-recursion/213: ok |
[ 0.010000] hard-irq read-recursion/231: ok |
[ 0.010000] soft-irq read-recursion/231: ok |
[ 0.010000] hard-irq read-recursion/312: ok |
[ 0.010000] soft-irq read-recursion/312: ok |
[ 0.010000] hard-irq read-recursion/321: ok |
[ 0.010000] soft-irq read-recursion/321: ok |
[ 0.010000] --------------------------------------------------------
[ 0.010000] 142 out of 218 testcases failed, as expected. |
[ 0.010000] ----------------------------------------------------
[ 0.010000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.010000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.010000] Checking aperture...
[ 0.010000] Memory: 1021116k/1048256k available (5164k kernel code, 26112k reserved, 2589k data, 292k init)
[ 0.010000] CPA: page pool initialized 1 of 1 pages preallocated
[ 0.010000] SLUB: Genslabs=12, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
[ 0.010000] hpet clockevent registered
[ 0.150002] Calibrating delay using timer specific routine.. 4842.12 BogoMIPS (lpj=24210644)
[ 0.150999] Security Framework initialized
[ 0.151130] Capability LSM initialized
[ 0.151260] Mount-cache hash table entries: 256
[ 0.151542] Initializing cgroup subsys cpuacct
[ 0.151678] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.151849] CPU: L2 cache: 2048K
[ 0.151969] CPU: Physical Processor ID: 0
[ 0.152092] CPU: Processor Core ID: 0
[ 0.152220] CPU0: Thermal monitoring enabled (TM1)
[ 0.152348] using mwait in idle threads.
[ 0.152478] ACPI: Core revision 20070126
[ 0.263084] Using local APIC timer interrupts.
[ 0.270001] APIC timer calibration result 16804321
[ 0.270002] Detected 16.804 MHz APIC timer.
[ 0.270252] lockdep: fixing up alternatives.
[ 0.270397] Booting processor 1/2 APIC 0x1
[ 0.010000] Initializing CPU#1
[ 0.010000] Calibrating delay using timer specific routine.. 4839.69 BogoMIPS (lpj=24198487)
[ 0.010000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.010000] CPU: L2 cache: 2048K
[ 0.010000] CPU: Physical Processor ID: 0
[ 0.010000] CPU: Processor Core ID: 1
[ 0.010000] CPU1: Thermal monitoring enabled (TM1)
[ 0.010000] Intel(R) Core(TM)2 CPU 4300 @ 1.80GHz stepping 02
[ 0.430341] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.440027] Brought up 2 CPUs
[ 0.440198] CPU0 attaching sched-domain:
[ 0.440200] domain 0: span 3
[ 0.440202] groups: 1 2
[ 0.440205] CPU1 attaching sched-domain:
[ 0.440206] domain 0: span 3
[ 0.440208] groups: 2 1
[ 0.440452] net_namespace: 1120 bytes
[ 0.440718] NET: Registered protocol family 16
[ 0.440958] No dock devices found.
[ 0.441165] ACPI: bus type pci registered
[ 0.441305] PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
[ 0.441442] PCI: Not using MMCONFIG.
[ 0.441563] PCI: Using configuration type 1
[ 0.445630] ACPI: EC: Look up EC in DSDT
[ 0.451517] ACPI: Interpreter enabled
[ 0.451641] ACPI: (supports S0 S5)
[ 0.451850] ACPI: Using IOAPIC for interrupt routing
[ 0.458200] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.459862] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.460095] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NBPG._PRT]
[ 0.460191] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
[ 0.471414] ACPI: PCI Root Bridge [PCI1] (0000:80)
[ 0.471629] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1._PRT]
[ 0.471818] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.472570] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 0.473798] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.474548] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.475297] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.476198] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.477098] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.477998] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.478806] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.478972] pnp: PnP ACPI init
[ 0.479096] ACPI: bus type pnp registered
[ 0.479395] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.479463] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.479546] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.479596] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.479652] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.480626] 00:05: calling quirk 0xffffffff80445e10: quirk_system_pci_resources+0x0/0x1b0()
[ 0.480684] pnp 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.480846] pnp 00:06: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.480925] 00:07: calling quirk 0xffffffff80445e10: quirk_system_pci_resources+0x0/0x1b0()
[ 0.480976] pnp 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.481065] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.481187] pnp 00:09: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
[ 0.481446] 00:0a: calling quirk 0xffffffff80445e10: quirk_system_pci_resources+0x0/0x1b0()
[ 0.481502] pnp 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.481748] 00:0b: calling quirk 0xffffffff80445e10: quirk_system_pci_resources+0x0/0x1b0()
[ 0.481802] pnp 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.481959] pnp 00:0c: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.482241] pnp: PnP ACPI: found 13 devices
[ 0.482366] ACPI: ACPI bus type pnp unregistered
[ 0.482730] SCSI subsystem initialized
[ 0.482928] libata version 3.00 loaded.
[ 0.483105] usbcore: registered new interface driver usbfs
[ 0.483302] usbcore: registered new interface driver hub
[ 0.483481] usbcore: registered new device driver usb
[ 0.484021] PCI: Using ACPI for IRQ routing
[ 0.484147] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 0.550012] Bluetooth: Core ver 2.11
[ 0.550288] NET: Registered protocol family 31
[ 0.550415] Bluetooth: HCI device and connection manager initialized
[ 0.550553] Bluetooth: HCI socket layer initialized
[ 0.670037] DMAR:parse DMAR table failure.
[ 0.670169] PCI-GART: No AMD northbridge found.
[ 0.670300] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.670601] hpet0: 3 32-bit timers, 14318180 Hz
[ 0.671756] ACPI: RTC can wake from S4
[ 0.680011] Switched to high resolution mode on CPU 0
[ 0.240015] Switched to high resolution mode on CPU 1
[ 0.790013] pnp: the driver 'system' has been registered
[ 0.790024] system 00:05: ioport range 0x295-0x296 has been reserved
[ 0.790161] system 00:05: ioport range 0x3e0-0x3e7 has been reserved
[ 0.790298] system 00:05: ioport range 0x4d0-0x4d1 has been reserved
[ 0.790435] system 00:05: ioport range 0x800-0x87f has been reserved
[ 0.790571] system 00:05: ioport range 0x400-0x41f has been reserved
[ 0.790709] system 00:05: iomem range 0xfffffff0-0xffffffff could not be reserved
[ 0.790911] system 00:05: iomem range 0xffb80000-0xffbfffff could not be reserved
[ 0.791113] system 00:05: driver attached
[ 0.791118] system 00:07: iomem range 0xfec00000-0xfec00fff has been reserved
[ 0.791259] system 00:07: iomem range 0xfee00000-0xfee00fff could not be reserved
[ 0.791461] system 00:07: driver attached
[ 0.791467] system 00:0a: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.791607] system 00:0a: driver attached
[ 0.791612] system 00:0b: iomem range 0x0-0x9ffff could not be reserved
[ 0.791750] system 00:0b: iomem range 0xc0000-0xcffff has been reserved
[ 0.791889] system 00:0b: iomem range 0xe0000-0xfffff could not be reserved
[ 0.792029] system 00:0b: iomem range 0x100000-0x3fffffff could not be reserved
[ 0.792230] system 00:0b: iomem range 0xfff80000-0xffffffff could not be reserved
[ 0.792431] system 00:0b: driver attached
[ 0.792943] PCI: Bridge: 0000:00:01.0
[ 0.793065] IO window: disabled.
[ 0.793188] MEM window: 0xfa800000-0xfa8fffff
[ 0.793317] PREFETCH window: disabled.
[ 0.793444] PCI: Bridge: 0000:00:02.0
[ 0.793567] IO window: c000-cfff
[ 0.793690] MEM window: 0xfa900000-0xfe9fffff
[ 0.793819] PREFETCH window: 0x00000000aff00000-0x00000000cfefffff
[ 0.793976] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 0.793993] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 27 (level, low) -> IRQ 27
[ 0.794241] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 0.794249] NET: Registered protocol family 2
[ 1.150048] IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 1.150410] TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
[ 1.151534] TCP bind hash table entries: 65536 (order: 9, 3670016 bytes)
[ 1.154199] TCP: Hash tables configured (established 131072 bind 65536)
[ 1.154341] TCP reno registered
[ 0.842374] NTFS driver 2.1.29 [Flags: R/O].
[ 0.842643] fuse init (API version 7.9)
[ 0.843001] SGI XFS with ACLs, large block/inode numbers, no debug enabled
[ 0.844098] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.844301] io scheduler noop registered
[ 0.844425] io scheduler deadline registered (default)
[ 0.844566] PCI: VIA PCI bridge detected. Disabling DAC.
[ 0.844796] pci 0000:02:00.0: Boot video device
[ 0.844893] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 0.844927] assign_interrupt_mode Found MSI capability
[ 0.845108] Allocate Port Service[0000:00:02.0:pcie00]
[ 0.845145] Allocate Port Service[0000:00:02.0:pcie02]
[ 0.845351] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 0.845556] ACPI: Power Button (FF) [PWRF]
[ 0.845778] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 0.845987] ACPI: Power Button (CM) [PWRB]
[ 0.846598] ACPI: ACPI0007:00 is registered as cooling_device0
[ 0.846994] ACPI: ACPI0007:01 is registered as cooling_device1
[ 1.055487] Real Time Clock Driver v1.12ac
[ 1.055828] hpet_resources: 0xfed00000 is busy
[ 1.055909] Linux agpgart interface v0.103
[ 1.056049] agpgart: Detected VIA PT880 Ultra chipset
[ 1.065332] agpgart: AGP aperture is 256M @ 0xd0000000
[ 1.065531] Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds).
[ 1.065740] Hangcheck: Using get_cycles().
[ 1.066226] loop: module loaded
[ 1.066423] Ethernet Channel Bonding Driver: v3.2.5 (March 21, 2008)
[ 1.066560] bonding: Warning: either miimon or arp_interval and arp_ip_target module parameters must be specified, otherwise bonding will not detect link failures! see bonding.txt for details.
[ 1.067132] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
[ 1.067292] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 23 (level, low) -> IRQ 23
[ 1.067768] eth0: VIA Rhine II at 0xfebffc00, 00:19:66:12:22:a6, IRQ 23.
[ 1.068613] eth0: MII PHY found at address 1, status 0x7849 advertising 05e1 Link 0000.
[ 1.069744] tun: Universal TUN/TAP device driver, 1.6
[ 1.069874] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 1.070113] ACPI: PCI Interrupt 0000:00:0b.0[A] -> GSI 19 (level, low) -> IRQ 19
[ 1.070363] PCI: Disallowing DAC for device 0000:00:0b.0
[ 1.076607] phy0 -> rt61pci_validate_eeprom: EEPROM recovery - NIC: 0xff80
[ 1.076609] phy0 -> rt61pci_validate_eeprom: EEPROM recovery - RSSI OFFSET BG: 0x0000
[ 1.076611] phy0 -> rt61pci_validate_eeprom: EEPROM recovery - RSSI OFFSET BG: 0x0000
[ 1.076615] phy0 -> rt2x00_set_chip: Info - Chipset detected - rt: 0301, rf: 0003, rev: 0002561c.
[ 1.077207] phy0: Selected rate control algorithm 'simple'
[ 1.077676] Driver 'sd' needs updating - please use bus_type methods
[ 1.077844] Driver 'sr' needs updating - please use bus_type methods
[ 1.078144] sata_via 0000:00:0f.0: version 2.3
[ 1.078162] ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 21 (level, low) -> IRQ 21
[ 1.078429] sata_via 0000:00:0f.0: routed to hard irq line 7
[ 1.078630] scsi0 : sata_via
[ 1.078813] scsi1 : sata_via
[ 1.080225] ata1: SATA max UDMA/133 cmd 0xdc00 ctl 0xd880 bmdma 0xd400 irq 21
[ 1.080366] ata2: SATA max UDMA/133 cmd 0xd800 ctl 0xd480 bmdma 0xd408 irq 21
[ 1.610014] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.638956] ata1.00: ATA-8: WDC WD5000AAKS-07YGA0, 12.01C02, max UDMA/133
[ 1.639095] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.651041] ata1.00: configured for UDMA/133
[ 1.670012] ata2: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
[ 1.180012] scsi 0:0:0:0: Direct-Access ATA WDC WD5000AAKS-0 12.0 PQ: 0 ANSI: 5
[ 1.180012] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
[ 1.180012] sd 0:0:0:0: [sda] Write Protect is off
[ 1.180012] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.180012] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.180012] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
[ 1.180012] sd 0:0:0:0: [sda] Write Protect is off
[ 1.180012] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.180012] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.180012] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 sda10 sda11 >
[ 1.749378] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.749584] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.749854] pata_via 0000:00:0f.1: version 0.3.3
[ 1.749950] scsi2 : pata_via
[ 1.750073] scsi3 : pata_via
[ 1.752462] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
[ 1.752603] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
[ 1.400368] ata3.00: ATAPI: HL-DT-ST DVDRAM GSA-4163B, A105, max UDMA/33
[ 1.400514] ata3.01: ATAPI: HL-DT-ST GCE-8523B, 1.04, max UDMA/33
[ 1.430239] ata3.00: configured for UDMA/33
[ 1.460238] ata3.01: configured for UDMA/33
[ 1.880007] scsi 2:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-4163B A105 PQ: 0 ANSI: 5
[ 1.886387] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.886590] Uniform CD-ROM driver Revision: 3.20
[ 1.886806] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 1.886883] sr 2:0:0:0: Attached scsi generic sg1 type 5
[ 1.887295] scsi 2:0:1:0: CD-ROM HL-DT-ST CD-RW GCE-8523B 1.04 PQ: 0 ANSI: 5
[ 1.890345] sr1: scsi3-mmc drive: 40x/52x writer cd/rw xa/form2 cdda tray
[ 1.890540] sr 2:0:1:0: Attached scsi CD-ROM sr1
[ 1.890614] sr 2:0:1:0: Attached scsi generic sg2 type 5
[ 1.890980] ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 21
[ 1.891235] ehci_hcd 0000:00:10.4: EHCI Host Controller
[ 1.891466] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1
[ 1.891697] ehci_hcd 0000:00:10.4: irq 21, io mem 0xfebff800
[ 1.910011] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 1.910373] usb usb1: configuration #1 chosen from 1 choice
[ 1.910548] hub 1-0:1.0: USB hub found
[ 1.910675] hub 1-0:1.0: 8 ports detected
[ 2.020108] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.020251] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.020452] usb usb1: Product: EHCI Host Controller
[ 2.020580] usb usb1: Manufacturer: Linux 2.6.25-rc8-00166-g6fdf5e6 ehci_hcd
[ 2.020720] usb usb1: SerialNumber: 0000:00:10.4
[ 2.020885] USB Universal Host Controller Interface driver v3.0
[ 2.021052] ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 20 (level, low) -> IRQ 20
[ 2.021301] uhci_hcd 0000:00:10.0: UHCI Host Controller
[ 2.021521] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
[ 2.021745] uhci_hcd 0000:00:10.0: irq 20, io base 0x0000e000
[ 2.022008] usb usb2: configuration #1 chosen from 1 choice
[ 2.022181] hub 2-0:1.0: USB hub found
[ 2.022307] hub 2-0:1.0: 2 ports detected
[ 2.130110] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.130253] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.130454] usb usb2: Product: UHCI Host Controller
[ 2.130582] usb usb2: Manufacturer: Linux 2.6.25-rc8-00166-g6fdf5e6 uhci_hcd
[ 2.130722] usb usb2: SerialNumber: 0000:00:10.0
[ 2.130873] ACPI: PCI Interrupt 0000:00:10.1[B] -> GSI 22 (level, low) -> IRQ 22
[ 2.131121] uhci_hcd 0000:00:10.1: UHCI Host Controller
[ 2.131341] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
[ 2.131563] uhci_hcd 0000:00:10.1: irq 22, io base 0x0000e080
[ 2.131830] usb usb3: configuration #1 chosen from 1 choice
[ 2.132003] hub 3-0:1.0: USB hub found
[ 2.132129] hub 3-0:1.0: 2 ports detected
[ 2.230111] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.230250] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.230450] usb usb3: Product: UHCI Host Controller
[ 2.230579] usb usb3: Manufacturer: Linux 2.6.25-rc8-00166-g6fdf5e6 uhci_hcd
[ 2.230719] usb usb3: SerialNumber: 0000:00:10.1
[ 2.230867] ACPI: PCI Interrupt 0000:00:10.2[C] -> GSI 21 (level, low) -> IRQ 21
[ 2.231115] uhci_hcd 0000:00:10.2: UHCI Host Controller
[ 2.231330] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
[ 2.231548] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000e400
[ 2.231807] usb usb4: configuration #1 chosen from 1 choice
[ 2.231979] hub 4-0:1.0: USB hub found
[ 2.232105] hub 4-0:1.0: 2 ports detected
[ 2.340115] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.340254] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.340454] usb usb4: Product: UHCI Host Controller
[ 2.340583] usb usb4: Manufacturer: Linux 2.6.25-rc8-00166-g6fdf5e6 uhci_hcd
[ 2.340723] usb usb4: SerialNumber: 0000:00:10.2
[ 2.340871] ACPI: PCI Interrupt 0000:00:10.3[D] -> GSI 23 (level, low) -> IRQ 23
[ 2.341120] uhci_hcd 0000:00:10.3: UHCI Host Controller
[ 2.341342] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
[ 2.341563] uhci_hcd 0000:00:10.3: irq 23, io base 0x0000e480
[ 2.341825] usb usb5: configuration #1 chosen from 1 choice
[ 2.341998] hub 5-0:1.0: USB hub found
[ 2.342124] hub 5-0:1.0: 2 ports detected
[ 2.440104] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.440243] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.440444] usb usb5: Product: UHCI Host Controller
[ 2.440572] usb usb5: Manufacturer: Linux 2.6.25-rc8-00166-g6fdf5e6 uhci_hcd
[ 2.440712] usb usb5: SerialNumber: 0000:00:10.3
[ 2.440885] Initializing USB Mass Storage driver...
[ 2.640007] usbcore: registered new interface driver usb-storage
[ 2.640007] USB Mass Storage support registered.
[ 2.640007] pnp: the driver 'i8042 kbd' has been registered
[ 2.640007] i8042 kbd 00:08: driver attached
[ 2.640007] pnp: the driver 'i8042 aux' has been registered
[ 2.640007] i8042 aux 00:09: driver attached
[ 2.640007] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 2.640007] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.640007] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.640007] mice: PS/2 mouse device common for all mice
[ 2.649592] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 2.724068] I2O subsystem v1.325
[ 2.724188] i2o: max drivers = 8
[ 2.724453] pnp: the driver 'rtc_cmos' has been registered
[ 2.724461] rtc_cmos 00:02: disabling not supported
[ 2.724465] rtc_cmos: probe of 00:02 failed with error -16
[ 2.724628] i2c /dev entries driver
[ 2.725101] Driver for 1-wire Dallas network protocol.
[ 2.725423] usbcore: registered new interface driver DS9490R
[ 2.725594] 1-Wire driver for the DS2760 battery monitor chip - (c) 2004-2005, Szabolcs Gyurko
[ 2.725819] w83627hf: Found W83697HF chip at 0x290
[ 2.870007] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input3
[ 2.983363] coretemp coretemp.0: Using relative temperature scale!
[ 2.983583] coretemp coretemp.1: Using relative temperature scale!
[ 2.983888] WDT driver for the Winbond(TM) W83627HF/THF/HG Super I/O chip initialising.
[ 2.984120] w83627hf/thf/hg WDT: Watchdog already running. Resetting timeout to 60 sec
[ 2.984388] w83627hf/thf/hg WDT: initialized. timeout=60 sec (nowayout=0)
[ 2.984527] w83697hf/hg WDT: WDT driver for W83697HF/HG initializing
[ 2.984663] w83697hf/hg WDT: I/O address 0x2e already in use
[ 2.984796] w83697hf/hg WDT: No W83697HF/HG could be found
[ 2.984928] SoftDog: cannot register miscdev on minor=130 (err=-16)
[ 2.985064] Bluetooth: HCI USB driver ver 2.9
[ 2.985228] usbcore: registered new interface driver hci_usb
[ 2.985362] Bluetooth: HCI UART driver ver 2.2
[ 2.985490] Bluetooth: HCI H4 protocol initialized
[ 2.985617] Bluetooth: HCI BCSP protocol initialized
[ 2.985746] Bluetooth: HCILL protocol initialized
[ 2.985873] Bluetooth: Broadcom Blutonium firmware driver ver 1.1
[ 2.986046] usbcore: registered new interface driver bcm203x
[ 2.986180] Bluetooth: Digianswer Bluetooth USB driver ver 0.9
[ 2.986350] usbcore: registered new interface driver bpa10x
[ 2.986483] EDAC MC: Ver: 2.1.0 Apr 5 2008
[ 2.986761] cpuidle: using governor ladder
[ 2.986886] cpuidle: using governor menu
[ 2.987081] usbcore: registered new interface driver usbhid
[ 2.987214] drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[ 2.987401] Advanced Linux Sound Architecture Driver Version 1.0.16rc2 (Thu Jan 31 16:40:16 2008 UTC).
[ 2.987950] ACPI: PCI Interrupt 0000:00:0c.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 3.002100] ALSA device list:
[ 3.002221] #0: SB Live 5.1 (rev.8, serial:0x80641102) at 0xef00, irq 16
[ 3.002419] oprofile: using NMI interrupt.
[ 3.002667] GACT probability on
[ 3.002786] Mirror/redirect action on
[ 3.002908] Simple TC action Loaded
[ 3.003314] netem: version 1.2
[ 3.003433] u32 classifier
[ 3.003549] Performance counters on
[ 3.003671] input device check on
[ 3.003793] Actions configured
[ 3.003917] Netfilter messages via NETLINK v0.30.
[ 3.004483] IPv4 over IPv4 tunneling driver
[ 3.004889] GRE over IPv4 tunneling driver
[ 3.005346] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 3.005495] arp_tables: (C) 2002 David S. Miller
[ 3.005636] TCP bic registered
[ 3.005755] TCP cubic registered
[ 3.005874] TCP westwood registered
[ 3.005994] TCP highspeed registered
[ 3.006116] TCP hybla registered
[ 3.006235] TCP htcp registered
[ 3.006353] TCP vegas registered
[ 3.006473] TCP scalable registered
[ 3.006593] Initializing XFRM netlink socket
[ 3.006791] NET: Registered protocol family 1
[ 3.007013] NET: Registered protocol family 10
[ 3.007625] lo: Disabled Privacy Extensions
[ 3.009888] tunl0: Disabled Privacy Extensions
[ 3.010713] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 3.010862] IPv6 over IPv4 tunneling driver
[ 3.011403] sit0: Disabled Privacy Extensions
[ 3.012688] NET: Registered protocol family 17
[ 3.012818] NET: Registered protocol family 15
[ 3.012950] Bluetooth: L2CAP ver 2.9
[ 3.013792] Bluetooth: L2CAP socket layer initialized
[ 3.013923] Bluetooth: SCO (Voice Link) ver 0.5
[ 3.014049] Bluetooth: SCO socket layer initialized
[ 3.014211] Bluetooth: RFCOMM socket layer initialized
[ 3.014343] Bluetooth: RFCOMM ver 1.8
[ 3.014465] Bluetooth: BNEP (Ethernet Emulation) ver 1.2
[ 3.014596] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 3.016147] SCTP: Hash tables configured (established 18724 bind 18724)
[ 3.220119] ieee80211: 802.11 data/management/control stack, git-1.1.13
[ 3.220258] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
[ 3.220465] ieee80211_crypt: registered algorithm 'NULL'
[ 3.220467] ieee80211_crypt: registered algorithm 'WEP'
[ 3.220468] ieee80211_crypt: registered algorithm 'CCMP'
[ 3.220470] ieee80211_crypt: registered algorithm 'TKIP'
[ 3.254852] UDF-fs: No VRS found
[ 3.270199] XFS mounting filesystem sda2
[ 3.328057] Ending clean XFS mount for filesystem: sda2
[ 3.328089] VFS: Mounted root (xfs filesystem) readonly.
[ 3.328234] Freeing unused kernel memory: 292k freed
[ 3.328472] Write protecting the kernel read-only data: 2012k
[ 5.344802] Adding 2008084k swap on /dev/sda5. Priority:-1 extents:1 across:2008084k
[ 6.540334] XFS mounting filesystem sda1
[ 6.560007] Ending clean XFS mount for filesystem: sda1
[ 7.022503] XFS mounting filesystem sda6
[ 7.070007] Ending clean XFS mount for filesystem: sda6
[ 8.231141] XFS mounting filesystem sda11
[ 8.290008] Ending clean XFS mount for filesystem: sda11
[ 9.552123] phy0 -> rt2x00lib_request_firmware: Info - Loading firmware file 'rt2561s.bin'.
[ 8.008777] phy0 -> rt2x00lib_request_firmware: Info - Firmware detected - version: 0.8.
[ 8.050051] phy0 -> rt61pci_init_bbp: Debug - Start initialization from EEPROM...
[ 8.050055] phy0 -> rt61pci_init_bbp: Debug - ...End initialization from EEPROM.
[ 8.070103] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 8.070811] eth0: link down
[ 8.070913] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 10.131065] phy0 -> rt2x00mac_conf_tx: Info - Configured TX ring 0 - CWmin: 4, CWmax: 10, Aifs: 2.
[ 10.131071] phy0 -> rt2x00mac_conf_tx: Info - Configured TX ring 1 - CWmin: 4, CWmax: 10, Aifs: 2.
[ 10.131074] phy0 -> rt2x00mac_conf_tx: Info - Configured TX ring 2 - CWmin: 4, CWmax: 10, Aifs: 2.
[ 10.131076] phy0 -> rt2x00mac_conf_tx: Info - Configured TX ring 3 - CWmin: 4, CWmax: 10, Aifs: 2.
[ 10.131125] phy0 -> rt2x00mac_conf_tx: Info - Configured TX ring 4 - CWmin: 4, CWmax: 10, Aifs: 2.
[ 10.133516] phy0 -> rt2x00mac_conf_tx: Info - Configured TX ring 0 - CWmin: 4, CWmax: 10, Aifs: 2.
[ 10.133521] phy0 -> rt2x00mac_conf_tx: Info - Configured TX ring 1 - CWmin: 4, CWmax: 10, Aifs: 2.
[ 10.133524] phy0 -> rt2x00mac_conf_tx: Info - Configured TX ring 2 - CWmin: 4, CWmax: 10, Aifs: 2.
[ 10.133560] phy0 -> rt2x00mac_conf_tx: Info - Configured TX ring 3 - CWmin: 4, CWmax: 10, Aifs: 2.
[ 10.133563] phy0 -> rt2x00mac_conf_tx: Info - Configured TX ring 4 - CWmin: 4, CWmax: 10, Aifs: 2.
[ 11.060027] wlan0: Initial auth_alg=0
[ 11.060035] wlan0: authenticate with AP 00:1d:7e:e3:82:84
[ 12.703932] wlan0: RX authentication from 00:1d:7e:e3:82:84 (alg=0 transaction=2 status=0)
[ 12.703936] wlan0: authenticated
[ 12.703938] wlan0: associate with AP 00:1d:7e:e3:82:84
[ 12.706536] wlan0: RX AssocResp from 00:1d:7e:e3:82:84 (capab=0x401 status=0 aid=2)
[ 12.706539] wlan0: associated
[ 12.706560] wlan0: WMM queue=2 aci=0 acm=0 aifs=3 cWmin=15 cWmax=1023 burst=0
[ 12.706562] phy0 -> rt2x00mac_conf_tx: Info - Configured TX ring 2 - CWmin: 4, CWmax: 10, Aifs: 3.
[ 12.706565] wlan0: WMM queue=3 aci=1 acm=0 aifs=7 cWmin=15 cWmax=1023 burst=0
[ 12.706566] phy0 -> rt2x00mac_conf_tx: Info - Configured TX ring 3 - CWmin: 4, CWmax: 10, Aifs: 7.
[ 12.706569] wlan0: WMM queue=1 aci=2 acm=0 aifs=2 cWmin=7 cWmax=15 burst=30
[ 12.706571] phy0 -> rt2x00mac_conf_tx: Info - Configured TX ring 1 - CWmin: 3, CWmax: 4, Aifs: 2.
[ 12.706573] wlan0: WMM queue=0 aci=3 acm=0 aifs=2 cWmin=3 cWmax=7 burst=15
[ 12.706575] phy0 -> rt2x00mac_conf_tx: Info - Configured TX ring 0 - CWmin: 2, CWmax: 3, Aifs: 2.
[ 12.706714] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 21.460012] wlan0: no IPv6 routers present
[ 529.059933] wlan0: switched to short barker preamble (BSSID=00:1d:7e:e3:82:84)
[ 529.623388] wlan0: switched to long barker preamble (BSSID=00:1d:7e:e3:82:84)
[ 638.319116] wlan0: switched to short barker preamble (BSSID=00:1d:7e:e3:82:84)
[ 642.726665] wlan0: switched to long barker preamble (BSSID=00:1d:7e:e3:82:84)
[ 784.657477] wlan0: switched to short barker preamble (BSSID=00:1d:7e:e3:82:84)
[ 1250.997877] wlan0: switched to long barker preamble (BSSID=00:1d:7e:e3:82:84)
[ 1436.436535] wlan0: switched to short barker preamble (BSSID=00:1d:7e:e3:82:84)
[ 1443.114019] wlan0: switched to long barker preamble (BSSID=00:1d:7e:e3:82:84)
[ 3897.809274] wlan0: switched to short barker preamble (BSSID=00:1d:7e:e3:82:84)
[ 3898.300801] wlan0: switched to long barker preamble (BSSID=00:1d:7e:e3:82:84)
[ 4227.856143] wlan0: switched to short barker preamble (BSSID=00:1d:7e:e3:82:84)
[ 4228.183831] wlan0: switched to long barker preamble (BSSID=00:1d:7e:e3:82:84)
[ 4302.335325] wlan0: switched to short barker preamble (BSSID=00:1d:7e:e3:82:84)
[ 4306.349423] wlan0: switched to long barker preamble (BSSID=00:1d:7e:e3:82:84)
[ 4758.349027] wlan0: switched to short barker preamble (BSSID=00:1d:7e:e3:82:84)
[ 4762.415062] wlan0: switched to long barker preamble (BSSID=00:1d:7e:e3:82:84)
[ 4864.820295] wlan0: switched to short barker preamble (BSSID=00:1d:7e:e3:82:84)
[ 4868.732489] wlan0: switched to long barker preamble (BSSID=00:1d:7e:e3:82:84)
[ 4946.775772] wlan0: switched to short barker preamble (BSSID=00:1d:7e:e3:82:84)
[ 6499.435386] wlan0: switched to long barker preamble (BSSID=00:1d:7e:e3:82:84)
[ 6797.994598] wlan0: switched to short barker preamble (BSSID=00:1d:7e:e3:82:84)
[ 6803.299427] wlan0: switched to long barker preamble (BSSID=00:1d:7e:e3:82:84)
[ 6816.960161] wlan0: switched to short barker preamble (BSSID=00:1d:7e:e3:82:84)
[ 6853.017115] wlan0: switched to long barker preamble (BSSID=00:1d:7e:e3:82:84)
[28585.709062] wlan0: switched to short barker preamble (BSSID=00:1d:7e:e3:82:84)
[55381.364441] wlan0: switched to long barker preamble (BSSID=00:1d:7e:e3:82:84)
[63637.196606] wlan0: switched to short barker preamble (BSSID=00:1d:7e:e3:82:84)
[67239.003480] wlan0: switched to long barker preamble (BSSID=00:1d:7e:e3:82:84)
[94867.264304] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[94867.264477] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[94878.160360] eth0: no IPv6 routers present
[95252.009675] eth0: link down
[95259.029973] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[95289.992603] eth0: link down
[102367.866055] wlan0: switched to short barker preamble (BSSID=00:1d:7e:e3:82:84)
[102664.055026] wlan0: switched to long barker preamble (BSSID=00:1d:7e:e3:82:84)
[103599.021786] ISO 9660 Extensions: Microsoft Joliet Level 3
[103599.112820] ISO 9660 Extensions: RRIP_1991A
[110251.324775] wlan0: switched to short barker preamble (BSSID=00:1d:7e:e3:82:84)
[111319.289927] wlan0: switched to long barker preamble (BSSID=00:1d:7e:e3:82:84)
[111488.947414] wlan0: switched to short barker preamble (BSSID=00:1d:7e:e3:82:84)
[112784.669300] wlan0: switched to long barker preamble (BSSID=00:1d:7e:e3:82:84)
[113245.151307] wlan0: switched to short barker preamble (BSSID=00:1d:7e:e3:82:84)
[113951.240506] wlan0: switched to long barker preamble (BSSID=00:1d:7e:e3:82:84)
[114075.690400] wlan0: switched to short barker preamble (BSSID=00:1d:7e:e3:82:84)
[141153.801425] wlan0: switched to long barker preamble (BSSID=00:1d:7e:e3:82:84)
[142827.089647] wlan0: switched to short barker preamble (BSSID=00:1d:7e:e3:82:84)
[143373.845483] wlan0: switched to long barker preamble (BSSID=00:1d:7e:e3:82:84)
[145026.240307] general protection fault: 0000 [1] PREEMPT SMP
[145026.240313] CPU 0
[145026.240315] Modules linked in:
[145026.240318] Pid: 32546, comm: kmail Not tainted 2.6.25-rc8-00166-g6fdf5e6 #1
[145026.240320] RIP: 0010:[<ffffffff80275274>] [<ffffffff80275274>] set_page_dirty+0x34/0x90
[145026.240327] RSP: 0018:ffff810004ba9d98 EFLAGS: 00010206
[145026.240328] RAX: 6b636f6c5f747369 RBX: ffff81000779cae0 RCX: ffff8100010046e0
[145026.240330] RDX: ffffffff802c08d0 RSI: 8000000033d60067 RDI: ffffe20000b56d00
[145026.240332] RBP: 000000000115c000 R08: 0000000000000006 R09: 0000000000000001
[145026.240334] R10: 0000000000000002 R11: 000000000000031b R12: ffffe20000b56d00
[145026.240335] R13: 0000000001200000 R14: 0000000033d60067 R15: 0000000000000000
[145026.240338] FS: 0000000000000000(0000) GS:ffffffff80993000(0000) knlGS:0000000000000000
[145026.240340] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[145026.240341] CR2: 00007f695e7aa3f0 CR3: 0000000000201000 CR4: 00000000000006e0
[145026.240343] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[145026.240345] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[145026.240347] Process kmail (pid: 32546, threadinfo ffff810004ba8000, task ffff81002137a000)
[145026.240348] Stack: 0000000001155000 ffff81000779cae0 000000000115c000 ffffffff8027e271
[145026.240353] 0000000000000000 0000000001574fff 0000000000000000 ffff810004ba9ea8
[145026.240357] ffffffffffffffff 0000000000000000 ffff81003af86bd0 ffff810004ba9eb0
[145026.240360] Call Trace:
[145026.240364] [<ffffffff8027e271>] ? unmap_vmas+0x611/0x800
[145026.240367] [<ffffffff8028252a>] ? exit_mmap+0x8a/0x130
[145026.240370] [<ffffffff80236957>] ? mmput+0x57/0xe0
[145026.240373] [<ffffffff8023cc8a>] ? do_exit+0x19a/0x7e0
[145026.240377] [<ffffffff807079fb>] ? lockdep_sys_exit_thunk+0x35/0x67
[145026.240381] [<ffffffff803f6281>] ? __up_read+0x21/0xb0
[145026.240383] [<ffffffff8023d303>] ? do_group_exit+0x33/0xa0
[145026.240386] [<ffffffff8020b56b>] ? system_call_after_swapgs+0x7b/0x80
[145026.240387]
[145026.240388]
[145026.240389] Code: 48 8b 47 18 66 85 d2 78 70 a8 01 75 50 48 85 c0 74 4b 48 8b 80 b8 00 00 00 48 c7 c2 d0 08 2c 80 48 8b 40 20 48 85 c0 48 0f 44 c2 <ff> d0 85 c0 89 c5 74 21 65 48 8b 34 25 00 00 00 00 48 81 c6 d0
[145026.240416] RIP [<ffffffff80275274>] set_page_dirty+0x34/0x90
[145026.240419] RSP <ffff810004ba9d98>
[145026.240423] ---[ end trace 6b50f2d712edcd7a ]---
[145026.240424] Fixing recursive fault but reboot is needed!
[145026.240426] BUG: scheduling while atomic: kmail/32546/0x00000003
[145026.240428] INFO: lockdep is turned off.
[145026.240430] Pid: 32546, comm: kmail Tainted: G D 2.6.25-rc8-00166-g6fdf5e6 #1
[145026.240431]
[145026.240432] Call Trace:
[145026.240435] [<ffffffff80705a26>] thread_return+0x34c/0x576
[145026.240437] [<ffffffff80239469>] release_console_sem+0x49/0x200
[145026.240439] [<ffffffff80239e5e>] printk+0x4e/0x60
[145026.240441] [<ffffffff8023d29e>] do_exit+0x7ae/0x7e0
[145026.240444] [<ffffffff8022e223>] __wake_up+0x43/0x70
[145026.240446] [<ffffffff8020c8e7>] oops_end+0x87/0x90
[145026.240448] [<ffffffff8070884d>] error_exit+0x0/0x9a
[145026.240452] [<ffffffff802c08d0>] __set_page_dirty_buffers+0x0/0xc0
[145026.240454] [<ffffffff80275274>] set_page_dirty+0x34/0x90
[145026.240457] [<ffffffff8027b6f8>] __dec_zone_state+0x18/0x80
[145026.240459] [<ffffffff8027e271>] unmap_vmas+0x611/0x800
[145026.240461] [<ffffffff8028252a>] exit_mmap+0x8a/0x130
[145026.240463] [<ffffffff80236957>] mmput+0x57/0xe0
[145026.240466] [<ffffffff8023cc8a>] do_exit+0x19a/0x7e0
[145026.240468] [<ffffffff807079fb>] lockdep_sys_exit_thunk+0x35/0x67
[145026.240470] [<ffffffff803f6281>] __up_read+0x21/0xb0
[145026.240473] [<ffffffff8023d303>] do_group_exit+0x33/0xa0
[145026.240475] [<ffffffff8020b56b>] system_call_after_swapgs+0x7b/0x80
[145026.240476]

00:00.0 Host bridge: VIA Technologies, Inc. PT894 Host Bridge
Subsystem: ASRock Incorporation Unknown device 0308
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR+
Latency: 8, Cache Line Size: 32 bytes
Region 0: Memory at d0000000 (32-bit, prefetchable) [size=256M]
Capabilities: [80] AGP version 3.5
Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3- Rate=x1,x2,x4
Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none>
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:00.1 Host bridge: VIA Technologies, Inc. PT894 Host Bridge
Subsystem: ASRock Incorporation Unknown device 1308
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 32 bytes

00:00.2 Host bridge: VIA Technologies, Inc. PT894 Host Bridge
Subsystem: ASRock Incorporation Unknown device 2308
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 32 bytes

00:00.3 Host bridge: VIA Technologies, Inc. PT890 Host Bridge
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0

00:00.4 Host bridge: VIA Technologies, Inc. PT894 Host Bridge
Subsystem: ASRock Incorporation Unknown device 4308
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 32 bytes

00:00.5 PIC: VIA Technologies, Inc. PT894 I/O APIC Interrupt Controller (prog-if 20 [IO(X)-APIC])
Subsystem: ASRock Incorporation Unknown device 5308
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 32 bytes

00:00.7 Host bridge: VIA Technologies, Inc. PT894 Host Bridge
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 32 bytes

00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI Bridge (prog-if 00 [Normal decode])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Memory behind bridge: fa800000-fa8fffff
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
Capabilities: [70] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:02.0 PCI bridge: VIA Technologies, Inc. PT890 PCI to PCI Bridge Controller (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: fa900000-fe9fffff
Prefetchable memory behind bridge: aff00000-cfefffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
Capabilities: [40] Express Root Port (Slot+) IRQ 0
Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag-
Device: Latency L0s <1us, L1 unlimited
Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
Link: Supported Speed 2.5Gb/s, Width x4, ASPM L0s L1, Port 0
Link: Latency L0s <64ns, L1 <1us
Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
Link: Speed 2.5Gb/s, Width x4
Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+ Surpise+
Slot: Number 16, PowerLimit 75.000000
Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
Slot: AttnInd Unknown, PwrInd Unknown, Power-
Root: Correctable- Non-Fatal- Fatal- PME-
Capabilities: [68] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [70] Message Signalled Interrupts: Mask+ 64bit+ Queue=0/0 Enable+
Address: 00000000fee0300c Data: 4151
Masking: 00000001 Pending: 00000000

00:0b.0 Network controller: RaLink RT2561/RT61 802.11g PCI
Subsystem: RaLink Unknown device 2561
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at febf0000 (32-bit, non-prefetchable) [size=32K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:0c.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev 08)
Subsystem: Creative Labs SBLive! 5.1 Model SB0100
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (500ns min, 5000ns max)
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at ef00 [size=32]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:0c.1 Input device controller: Creative Labs SB Live! Game Port (rev 08)
Subsystem: Creative Labs Gameport Joystick
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Region 0: I/O ports at ec00 [size=8]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:0f.0 IDE interface: VIA Technologies, Inc. VT8237A SATA 2-Port Controller (rev 80) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: ASRock Incorporation Unknown device 0591
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Interrupt: pin B routed to IRQ 21
Region 0: I/O ports at dc00 [size=8]
Region 1: I/O ports at d880 [size=4]
Region 2: I/O ports at d800 [size=8]
Region 3: I/O ports at d480 [size=4]
Region 4: I/O ports at d400 [size=16]
Region 5: I/O ports at d000 [size=256]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:0f.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 07) (prog-if 8a [Master SecP PriP])
Subsystem: ASRock Incorporation K7VT2/K7VT6 motherboard
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled] [size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled] [size=1]
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled] [size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled] [size=1]
Region 4: I/O ports at fc00 [size=16]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev a0) (prog-if 00 [UHCI])
Subsystem: ASRock Incorporation K7VT6
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 20
Region 4: I/O ports at e000 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev a0) (prog-if 00 [UHCI])
Subsystem: ASRock Incorporation K7VT6
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32, Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 22
Region 4: I/O ports at e080 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev a0) (prog-if 00 [UHCI])
Subsystem: ASRock Incorporation K7VT6
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32, Cache Line Size: 32 bytes
Interrupt: pin C routed to IRQ 21
Region 4: I/O ports at e400 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:10.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev a0) (prog-if 00 [UHCI])
Subsystem: ASRock Incorporation K7VT6
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32, Cache Line Size: 32 bytes
Interrupt: pin D routed to IRQ 23
Region 4: I/O ports at e480 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 86) (prog-if 20 [EHCI])
Subsystem: ASRock Incorporation K7VT6 motherboard
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32, Cache Line Size: 32 bytes
Interrupt: pin C routed to IRQ 21
Region 0: Memory at febff800 (32-bit, non-prefetchable) [size=256]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:11.0 ISA bridge: VIA Technologies, Inc. VT8237A PCI to ISA Bridge
Subsystem: ASRock Incorporation Unknown device 3337
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:11.7 Host bridge: VIA Technologies, Inc. VT8251 Ultra VLINK Controller
Subsystem: VIA Technologies, Inc. Unknown device 337e
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR+
Latency: 32
Capabilities: [58] HyperTransport: Interrupt Discovery and Configuration

00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 7c)
Subsystem: ASRock Incorporation K7VT6 motherboard
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (750ns min, 2000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 23
Region 0: I/O ports at e800 [size=256]
Region 1: Memory at febffc00 (32-bit, non-prefetchable) [size=256]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:13.0 Host bridge: VIA Technologies, Inc. VT8237A Host Bridge
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 0
Capabilities: [60] HyperTransport: MSI Mapping

02:00.0 VGA compatible controller: nVidia Corporation G70 [GeForce 7300 GT] (rev a1) (prog-if 00 [VGA])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 10
Region 0: Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at b0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at fc000000 (64-bit, non-prefetchable) [size=16M]
Region 5: I/O ports at cc00 [size=128]
Expansion ROM at fe9e0000 [disabled] [size=128K]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [68] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [78] Express Endpoint IRQ 0
Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
Device: Latency L0s <1us, L1 <4us
Device: AtnBtn- AtnInd- PwrInd-
Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
Device: MaxPayload 128 bytes, MaxReadReq 512 bytes
Link: Supported Speed 2.5Gb/s, Width x16, ASPM L0s L1, Port 0
Link: Latency L0s <1us, L1 <4us
Link: ASPM Disabled RCB 128 bytes CommClk- ExtSynch-
Link: Speed 2.5Gb/s, Width x4


\
 
 \ /
  Last update: 2008-04-07 09:57    [W:2.825 / U:0.012 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site