lkml.org 
[lkml]   [2008]   [Apr]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: Suspend on Lenovo 3000 V200 - Linux 2.6.25rc8
Date
On April 7, 2008 04:58:37 Rafael J. Wysocki wrote:
> On Monday, 7 of April 2008, nikosapi wrote:
> > On April 6, 2008 19:23:36 Rafael J. Wysocki wrote:
> > > On Monday, 7 of April 2008, nikosapi wrote:
> > > > On April 6, 2008 16:21:57 Rafael J. Wysocki wrote:
> > > > > On Sunday, 6 of April 2008, Nick Nobody wrote:
>
> [--snip--]
>
> > > > Hello Rafael,
> > > >
> > > > I tested with that patch and the problem persists, when the laptop
> > > > resumes it locks up (with a black screen). If I add
> > > > acpi_apic_instance=2 acpi_osi=Linux as kernel boot options (as
> > > > suggested by my dmesg) when it resumes I get back to a virtual term
> > > > but I'm not able to log in. After entering my username it just hangs
> > > > there.
>
> Have you tried if doing "echo mem > /sys/power/state" instead of s2ram
> works?
>
> If you have, what graphics adapter is there in your machine?
>
> Rafael
> --

Yes, I've been using /sys/power/state to put the machine to sleep ever since
you told me.

Here's the output of lspci -d 8086:2a02 -vvvxxx

00:02.0 VGA compatible controller: Intel Corporation Mobile GM965/GL960
Integrated Graphics Controller (rev 03) (prog-if 00 [VGA controller])
Subsystem: Lenovo Unknown device 3c18
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f4000000 (64-bit, non-prefetchable) [size=1M]
Region 2: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at 1800 [size=8]
Capabilities: [90] Message Signalled Interrupts: Mask- 64bit-
Queue=0/0 Enable-
Address: 00000000 Data: 0000
Capabilities: [d0] Power Management version 3
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Bridge: PM- B3+
00: 86 80 02 2a 07 00 90 00 03 00 00 03 00 00 80 00
10: 04 00 00 f4 00 00 00 00 0c 00 00 d0 00 00 00 00
20: 01 18 00 00 00 00 00 00 00 00 00 00 aa 17 18 3c
30: 00 00 00 00 90 00 00 00 00 00 00 00 05 01 00 00
40: 00 00 00 00 48 00 00 00 09 00 0a 91 28 64 00 30
50: 04 00 30 00 19 00 00 00 00 00 00 00 00 00 80 3f
60: 00 00 00 00 00 00 02 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 05 d0 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 01 01 01 01 00 00 00 00 4d 01 00 00
d0: 01 00 23 00 00 00 01 01 01 01 00 94 34 00 00 00
e0: 00 00 00 00 00 00 00 00 00 80 00 00 00 00 00 00
f0: 05 02 34 07 00 00 00 00 90 0f 03 00 bc 0c 6e 3f

nick


\
 
 \ /
  Last update: 2008-04-07 16:11    [W:2.234 / U:0.572 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site