lkml.org 
[lkml]   [2008]   [Apr]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: macbook pro dvd playback after suspend Buffer I/O error
Hello; One thing that I noticed with previous kernels is when you put
in the DVD and press play(a few seconds after inserting a DVD), the
player will think for a few seconds then start playback(without a
Buffer error), but I noticed with 2.6.25-rc1 you have to wait for the
cd player to read the DVD then align itself and settle down before
pressing play to avoid the Buffer error.(in the past I was using
2.6.23, then moved to 2.6.24(for a few days and didnt notice,then
reverted to 2.6.23,then went to 2.6.25-rc1 once on 2.5.25-rc1, I
noticed the error. So with all honesty I'm not too sure where this
might be at)
regards;
Justin P. Mattock

On Fri, Apr 4, 2008 at 8:21 AM, Andrew Morton <akpm@linux-foundation.org> wrote:
>
> On Fri, 4 Apr 2008 05:07:45 +0000 "Justin Mattock" <justinmattock@gmail.com> wrote:
>
> > When playing a DVD and then suspending the system while the DVD is
> > still in play, upon wakeup I'm receiving a Buffer I/O error on device
> > sr0, logical block 356490.
> > the DVD will continue to play but then gmplayer complains: Warning!
> > FPS changed 23.976 -> 29.970 (-5.994005) [4] then the video becomes
> > very choppy. When looking at osx in the same test the DVD will be
> > paused until the cd player aligns itself, then playback will start.
> > With looking further at this I think this is an issue of a library or
> > codec, So with this in mind is there a package that I might look at to
> > see if this resolves the issue. Attached is dmesg of the Buffer I/O
> > regards;
>
> An ata thing, I assume. Let's cc linux-ide.
>
> Is this new behaviour in 2.6.25-rc8, or were earlier kernels OK?
>
> > [ 0.000000] Linux version 2.6.25-rc8 (root@unix) (gcc version 4.1.3 20080114 (prerelease) (Debian 4.1.2-19)) #1 SMP Tue Apr 1 23:57:23 UTC 2008
> > [ 0.000000] BIOS-provided physical RAM map:
> > [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> > [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> > [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> > [ 0.000000] BIOS-e820: 0000000000100000 - 000000003f0ea000 (usable)
> > [ 0.000000] BIOS-e820: 000000003f0ea000 - 000000003f2eb000 (ACPI NVS)
> > [ 0.000000] BIOS-e820: 000000003f2eb000 - 000000003febe000 (ACPI data)
> > [ 0.000000] BIOS-e820: 000000003febe000 - 000000003feef000 (ACPI NVS)
> > [ 0.000000] BIOS-e820: 000000003feef000 - 000000003ff00000 (ACPI data)
> > [ 0.000000] BIOS-e820: 000000003ff00000 - 0000000040000000 (reserved)
> > [ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
> > [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
> > [ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
> > [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
> > [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> > [ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
> > [ 0.000000] 112MB HIGHMEM available.
> > [ 0.000000] 896MB LOWMEM available.
> > [ 0.000000] Scan SMP from c0000000 for 1024 bytes.
> > [ 0.000000] Scan SMP from c009fc00 for 1024 bytes.
> > [ 0.000000] Scan SMP from c00f0000 for 65536 bytes.
> > [ 0.000000] Scan SMP from c009fc00 for 1024 bytes.
> > [ 0.000000] Entering add_active_range(0, 0, 258282) 0 entries of 256 used
> > [ 0.000000] Zone PFN ranges:
> > [ 0.000000] DMA 0 -> 4096
> > [ 0.000000] Normal 4096 -> 229376
> > [ 0.000000] HighMem 229376 -> 258282
> > [ 0.000000] Movable zone start PFN for each node
> > [ 0.000000] early_node_map[1] active PFN ranges
> > [ 0.000000] 0: 0 -> 258282
> > [ 0.000000] On node 0 totalpages: 258282
> > [ 0.000000] DMA zone: 32 pages used for memmap
> > [ 0.000000] DMA zone: 0 pages reserved
> > [ 0.000000] DMA zone: 4064 pages, LIFO batch:0
> > [ 0.000000] Normal zone: 1760 pages used for memmap
> > [ 0.000000] Normal zone: 223520 pages, LIFO batch:31
> > [ 0.000000] HighMem zone: 225 pages used for memmap
> > [ 0.000000] HighMem zone: 28681 pages, LIFO batch:7
> > [ 0.000000] Movable zone: 0 pages used for memmap
> > [ 0.000000] DMI 2.4 present.
> > [ 0.000000] Using APIC driver default
> > [ 0.000000] ACPI: RSDP 000FE020, 0024 (r2 APPLE )
> > [ 0.000000] ACPI: XSDT 3FEFD1C0, 0074 (r1 APPLE Apple00 A5 1000013)
> > [ 0.000000] ACPI: FACP 3FEFB000, 00F4 (r3 APPLE Apple00 A5 Loki 5F)
> > [ 0.000000] ACPI: DSDT 3FEF0000, 48D1 (r1 APPLE MacBookP 20002 INTL 20050309)
> > [ 0.000000] ACPI: FACS 3FEC0000, 0040
> > [ 0.000000] ACPI: HPET 3FEFA000, 0038 (r1 APPLE Apple00 1 Loki 5F)
> > [ 0.000000] ACPI: APIC 3FEF9000, 0068 (r1 APPLE Apple00 1 Loki 5F)
> > [ 0.000000] ACPI: MCFG 3FEF8000, 003C (r1 APPLE Apple00 1 Loki 5F)
> > [ 0.000000] ACPI: ASF! 3FEF7000, 00A0 (r32 APPLE Apple00 1 Loki 5F)
> > [ 0.000000] ACPI: SBST 3FEF6000, 0030 (r1 APPLE Apple00 1 Loki 5F)
> > [ 0.000000] ACPI: ECDT 3FEF5000, 0053 (r1 APPLE Apple00 1 Loki 5F)
> > [ 0.000000] ACPI: SSDT 3FEEF000, 04DC (r1 APPLE CpuPm 3000 INTL 20050309)
> > [ 0.000000] ACPI: SSDT 3FEBD000, 064F (r1 SataRe SataPri 1000 INTL 20050309)
> > [ 0.000000] ACPI: SSDT 3FEBC000, 069C (r1 SataRe SataSec 1000 INTL 20050309)
> > [ 0.000000] ACPI: DMI detected: Apple
> > [ 0.000000] ACPI: PM-Timer IO Port: 0x408
> > [ 0.000000] ACPI: Local APIC address 0xfee00000
> > [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
> > [ 0.000000] Processor #0 6:15 APIC version 20
> > [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
> > [ 0.000000] Processor #1 6:15 APIC version 20
> > [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
> > [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
> > [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
> > [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
> > [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> > [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
> > [ 0.000000] ACPI: IRQ0 used by override.
> > [ 0.000000] ACPI: IRQ2 used by override.
> > [ 0.000000] ACPI: IRQ9 used by override.
> > [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
> > [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
> > [ 0.000000] Using ACPI (MADT) for SMP configuration information
> > [ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:b0000000)
> > [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
> > [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
> > [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
> > [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 256265
> > [ 0.000000] Kernel command line: root=/dev/sda1 ro quiet splash vga=773 selinux=1 audit=1 enforcing=1 highres=off apic=verbose acpi_osi=Linux pnpacpi=off usbcore.autosuspend=1 pci=routeirq
> > [ 0.000000] audit: enabled (after initialization)
> > [ 0.000000] ACPI: Added _OSI(Linux)
> > [ 0.000000] mapped APIC to ffffb000 (fee00000)
> > [ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
> > [ 0.000000] Enabling fast FPU save and restore... done.
> > [ 0.000000] Enabling unmasked SIMD FPU exception support... done.
> > [ 0.000000] Initializing CPU#0
> > [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
> > [ 0.000000] Detected 2161.255 MHz processor.
> > [ 0.003333] Console: colour dummy device 80x25
> > [ 0.003333] console [tty0] enabled
> > [ 0.003333] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
> > [ 0.003333] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
> > [ 0.003333] Memory: 1019064k/1033128k available (2490k kernel code, 13416k reserved, 959k data, 332k init, 115624k highmem)
> > [ 0.003333] virtual kernel memory layout:
> > [ 0.003333] fixmap : 0xfff9a000 - 0xfffff000 ( 404 kB)
> > [ 0.003333] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
> > [ 0.003333] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
> > [ 0.003333] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
> > [ 0.003333] .init : 0xc0466000 - 0xc04b9000 ( 332 kB)
> > [ 0.003333] .data : 0xc036e8c8 - 0xc045e740 ( 959 kB)
> > [ 0.003333] .text : 0xc0100000 - 0xc036e8c8 (2490 kB)
> > [ 0.003333] Checking if this processor honours the WP bit even in supervisor mode...Ok.
> > [ 0.003333] CPA: page pool initialized 1 of 1 pages preallocated
> > [ 0.003333] SLUB: Genslabs=12, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
> > [ 0.003333] hpet clockevent registered
> > [ 0.083331] Calibrating delay using timer specific routine.. 4328.69 BogoMIPS (lpj=7210719)
> > [ 0.083348] Security Framework initialized
> > [ 0.083351] SELinux: Initializing.
> > [ 0.083358] SELinux: Starting in enforcing mode
> > [ 0.083366] selinux_register_security: Registering secondary module capability
> > [ 0.083368] Capability LSM initialized as secondary
> > [ 0.083377] Mount-cache hash table entries: 512
> > [ 0.083484] CPU: L1 I cache: 32K, L1 D cache: 32K
> > [ 0.083486] CPU: L2 cache: 4096K
> > [ 0.083489] CPU: Physical Processor ID: 0
> > [ 0.083490] CPU: Processor Core ID: 0
> > [ 0.083492] Intel machine check architecture supported.
> > [ 0.083495] Intel machine check reporting enabled on CPU#0.
> > [ 0.083497] using mwait in idle threads.
> > [ 0.083500] Compat vDSO mapped to ffffe000.
> > [ 0.083505] Checking 'hlt' instruction... OK.
> > [ 0.097770] ACPI: Core revision 20070126
> > [ 0.105392] CPU0: Intel(R) Core(TM)2 CPU T7400 @ 2.16GHz stepping 06
> > [ 0.105398] enabled ExtINT on CPU#0
> > [ 0.105407] Booting processor 1/1 ip 4000
> > [ 0.003333] Initializing CPU#1
> > [ 0.003333] masked ExtINT on CPU#1
> > [ 0.003333] Calibrating delay using timer specific routine.. 4324.65 BogoMIPS (lpj=7204251)
> > [ 0.003333] CPU: L1 I cache: 32K, L1 D cache: 32K
> > [ 0.003333] CPU: L2 cache: 4096K
> > [ 0.003333] CPU: Physical Processor ID: 0
> > [ 0.003333] CPU: Processor Core ID: 1
> > [ 0.003333] Intel machine check architecture supported.
> > [ 0.003333] Intel machine check reporting enabled on CPU#1.
> > [ 0.197373] CPU1: Intel(R) Core(TM)2 CPU T7400 @ 2.16GHz stepping 06
> > [ 0.197387] Total of 2 processors activated (8652.35 BogoMIPS).
> > [ 0.197578] ENABLING IO-APIC IRQs
> > [ 0.197579] init IO_APIC IRQs
> > [ 0.197581] IO-APIC (apicid-pin) 1-0 not connected.
> > [ 0.197625] IO-APIC (apicid-pin) 1-16, 1-17, 1-18, 1-19, 1-20, 1-21, 1-22, 1-23 not connected.
> > [ 0.197777] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
> > [ 0.230814] Using local APIC timer interrupts.
> > [ 0.230815] calibrating APIC timer ...
> > [ 0.233318] ... lapic delta = 1039057
> > [ 0.233318] ... PM timer delta = 357953
> > [ 0.233318] ... PM timer result ok
> > [ 0.233318] ..... delta 1039057
> > [ 0.233318] ..... mult: 44630068
> > [ 0.233318] ..... calibration result: 554163
> > [ 0.233318] ..... CPU clock speed is 2161.1523 MHz.
> > [ 0.233318] ..... host bus clock speed is 166.0885 MHz.
> > [ 0.233318] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
> > [ 0.233334] Brought up 2 CPUs
> > [ 0.233358] CPU0 attaching sched-domain:
> > [ 0.233360] domain 0: span 3
> > [ 0.233362] groups: 1 2
> > [ 0.233365] CPU1 attaching sched-domain:
> > [ 0.233366] domain 0: span 3
> > [ 0.233368] groups: 2 1
> > [ 0.233604] net_namespace: 452 bytes
> > [ 0.233613] Booting paravirtualized kernel on bare hardware
> > [ 0.233781] NET: Registered protocol family 16
> > [ 0.233952] No dock devices found.
> > [ 0.234059] EISA bus registered
> > [ 0.234063] ACPI: bus type pci registered
> > [ 0.234139] PCI: Using configuration type 1
> > [ 0.234141] Setting up standard PCI resources
> > [ 0.236136] ACPI: EC: EC description table is found, configuring boot EC
> > [ 0.236316] ACPI: EC: non-query interrupt received, switching to interrupt mode
> > [ 0.239148] ACPI: BIOS _OSI(Linux) query honored via cmdline
> > [ 0.239488] ACPI: Interpreter enabled
> > [ 0.239491] ACPI: (supports S0 S3 S4 S5)
> > [ 0.239502] ACPI: Using IOAPIC for interrupt routing
> > [ 0.252698] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
> > [ 0.252700] ACPI: EC: driver started in poll mode
> > [ 0.254869] ACPI: PCI Root Bridge [PCI0] (0000:00)
> > [ 0.255644] pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
> > [ 0.255649] pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO
> > [ 0.256495] PCI: Transparent bridge - 0000:00:1e.0
> > [ 0.256539] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
> > [ 0.256853] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
> > [ 0.256970] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
> > [ 0.257083] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
> > [ 0.257195] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
> > [ 0.257315] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
> > [ 0.263253] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
> > [ 0.263349] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
> > [ 0.263435] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
> > [ 0.263528] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
> > [ 0.263615] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
> > [ 0.263700] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
> > [ 0.263785] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
> > [ 0.263870] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11 12 14 15)
> > [ 0.264244] Linux Plug and Play Support v0.97 (c) Adam Belay
> > [ 0.264276] pnp: PnP ACPI: disabled
> > [ 0.264463] SCSI subsystem initialized
> > [ 0.264521] libata version 3.00 loaded.
> > [ 0.264627] usbcore: registered new interface driver usbfs
> > [ 0.264685] usbcore: registered new interface driver hub
> > [ 0.264739] usbcore: registered new device driver usb
> > [ 0.264994] PCI: Using ACPI for IRQ routing
> > [ 0.264997] PCI: Routing PCI interrupts for all devices because "pci=routeirq" specified
> > [ 0.265001] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
> > [ 0.265004] ACPI: PCI Interrupt 0000:00:07.0[A] -> GSI 16 (level, low) -> IRQ 16
> > [ 0.265007] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
> > [ 0.265011] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
> > [ 0.265013] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 16
> > [ 0.265016] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
> > [ 0.265019] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
> > [ 0.265023] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
> > [ 0.265025] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
> > [ 0.265028] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
> > [ 0.265031] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
> > [ 0.265033] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
> > [ 0.265036] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
> > [ 0.265039] ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) -> IRQ 19
> > [ 0.265041] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
> > [ 0.265044] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
> > [ 0.265047] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17
> > [ 0.265049] ACPI: PCI Interrupt 0000:0c:03.0[A] -> GSI 19 (level, low) -> IRQ 19
> > [ 0.265052] number of MP IRQ sources: 15.
> > [ 0.265053] number of IO-APIC #1 registers: 24.
> > [ 0.265055] testing the IO APIC.......................
> > [ 0.265063] IO APIC #1......
> > [ 0.265064] .... register #00: 00000000
> > [ 0.265066] ....... : physical APIC id: 00
> > [ 0.265067] ....... : Delivery Type: 0
> > [ 0.265068] ....... : LTS : 0
> > [ 0.265069] .... register #01: 00170020
> > [ 0.265071] ....... : max redirection entries: 0017
> > [ 0.265072] ....... : PRQ implemented: 0
> > [ 0.265074] ....... : IO APIC version: 0020
> > [ 0.265075] .... IRQ redirection table:
> > [ 0.265076] NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
> > [ 0.265081] 00 000 00 1 0 0 0 0 0 0 00
> > [ 0.265087] 01 003 03 0 0 0 0 0 1 1 39
> > [ 0.265093] 02 003 03 0 0 0 0 0 1 1 31
> > [ 0.265099] 03 003 03 0 0 0 0 0 1 1 41
> > [ 0.265105] 04 003 03 0 0 0 0 0 1 1 49
> > [ 0.265110] 05 003 03 0 0 0 0 0 1 1 51
> > [ 0.265116] 06 003 03 0 0 0 0 0 1 1 59
> > [ 0.265122] 07 003 03 0 0 0 0 0 1 1 61
> > [ 0.265127] 08 003 03 0 0 0 0 0 1 1 69
> > [ 0.265133] 09 003 03 0 1 0 0 0 1 1 71
> > [ 0.265139] 0a 003 03 0 0 0 0 0 1 1 79
> > [ 0.265144] 0b 003 03 0 0 0 0 0 1 1 81
> > [ 0.265150] 0c 003 03 0 0 0 0 0 1 1 89
> > [ 0.265156] 0d 003 03 0 0 0 0 0 1 1 91
> > [ 0.265161] 0e 003 03 0 0 0 0 0 1 1 99
> > [ 0.265167] 0f 003 03 0 0 0 0 0 1 1 A1
> > [ 0.265173] 10 003 03 1 1 0 1 0 1 1 A9
> > [ 0.265179] 11 003 03 1 1 0 1 0 1 1 B9
> > [ 0.265184] 12 003 03 1 1 0 1 0 1 1 C1
> > [ 0.265190] 13 003 03 1 1 0 1 0 1 1 D1
> > [ 0.265196] 14 000 00 1 0 0 0 0 0 0 00
> > [ 0.265202] 15 000 00 1 0 0 0 0 0 0 00
> > [ 0.265207] 16 003 03 1 1 0 1 0 1 1 B1
> > [ 0.265213] 17 003 03 1 1 0 1 0 1 1 C9
> > [ 0.265215] IRQ to pin mappings:
> > [ 0.265217] IRQ0 -> 0:2
> > [ 0.265218] IRQ1 -> 0:1
> > [ 0.265220] IRQ3 -> 0:3
> > [ 0.265222] IRQ4 -> 0:4
> > [ 0.265223] IRQ5 -> 0:5
> > [ 0.265225] IRQ6 -> 0:6
> > [ 0.265226] IRQ7 -> 0:7
> > [ 0.265228] IRQ8 -> 0:8
> > [ 0.265230] IRQ9 -> 0:9
> > [ 0.265231] IRQ10 -> 0:10
> > [ 0.265233] IRQ11 -> 0:11
> > [ 0.265235] IRQ12 -> 0:12
> > [ 0.265236] IRQ13 -> 0:13
> > [ 0.265238] IRQ14 -> 0:14
> > [ 0.265239] IRQ15 -> 0:15
> > [ 0.265241] IRQ16 -> 0:16
> > [ 0.265243] IRQ17 -> 0:17
> > [ 0.265244] IRQ18 -> 0:18
> > [ 0.265246] IRQ19 -> 0:19
> > [ 0.265247] IRQ22 -> 0:22
> > [ 0.265249] IRQ23 -> 0:23
> > [ 0.265251] .................................... done.
> > [ 0.269996] NetLabel: Initializing
> > [ 0.269997] NetLabel: domain hash size = 128
> > [ 0.269999] NetLabel: protocols = UNLABELED CIPSOv4
> > [ 0.270011] NetLabel: unlabeled traffic allowed by default
> > [ 0.270021] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 11
> > [ 0.270025] hpet0: 3 64-bit timers, 14318180 Hz
> > [ 0.307160] PCI: Bridge: 0000:00:01.0
> > [ 0.307162] IO window: 3000-3fff
> > [ 0.307166] MEM window: 0x50300000-0x503fffff
> > [ 0.307169] PREFETCH window: 0x0000000040000000-0x0000000047ffffff
> > [ 0.307173] PCI: Bridge: 0000:00:1c.0
> > [ 0.307176] IO window: 2000-2fff
> > [ 0.307181] MEM window: 0x50200000-0x502fffff
> > [ 0.307186] PREFETCH window: 0x0000000050500000-0x00000000505fffff
> > [ 0.307193] PCI: Bridge: 0000:00:1c.1
> > [ 0.307194] IO window: disabled.
> > [ 0.307199] MEM window: 0x50100000-0x501fffff
> > [ 0.307203] PREFETCH window: disabled.
> > [ 0.307210] PCI: Bridge: 0000:00:1c.2
> > [ 0.307213] IO window: 1000-1fff
> > [ 0.307218] MEM window: 0x4c100000-0x500fffff
> > [ 0.307222] PREFETCH window: 0x0000000048000000-0x000000004bffffff
> > [ 0.307230] PCI: Bridge: 0000:00:1e.0
> > [ 0.307231] IO window: disabled.
> > [ 0.307236] MEM window: 0x4c000000-0x4c0fffff
> > [ 0.307240] PREFETCH window: disabled.
> > [ 0.307255] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
> > [ 0.307260] PCI: Setting latency timer of device 0000:00:01.0 to 64
> > [ 0.307281] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
> > [ 0.307286] PCI: Setting latency timer of device 0000:00:1c.0 to 64
> > [ 0.307308] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 16
> > [ 0.307314] PCI: Setting latency timer of device 0000:00:1c.1 to 64
> > [ 0.307336] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
> > [ 0.307341] PCI: Setting latency timer of device 0000:00:1c.2 to 64
> > [ 0.307354] PCI: Setting latency timer of device 0000:00:1e.0 to 64
> > [ 0.307363] NET: Registered protocol family 2
> > [ 0.320025] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
> > [ 0.320209] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
> > [ 0.320565] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
> > [ 0.320740] TCP: Hash tables configured (established 131072 bind 65536)
> > [ 0.320743] TCP reno registered
> > [ 0.094028] IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
> > [ 0.094312] audit: initializing netlink socket (enabled)
> > [ 0.094323] type=2000 audit(1207283385.326:1): initialized
> > [ 0.094501] highmem bounce pool size: 64 pages
> > [ 0.094505] Total HugeTLB memory allocated, 0
> > [ 0.097174] fuse init (API version 7.9)
> > [ 0.097442] SELinux: Registering netfilter hooks
> > [ 0.097510] io scheduler noop registered
> > [ 0.097563] io scheduler cfq registered (default)
> > [ 0.097660] pci 0000:01:00.0: Boot video device
> > [ 0.097777] vesafb: framebuffer at 0x40000000, mapped to 0xf8880000, using 1536k, total 16384k
> > [ 0.097779] vesafb: mode is 1024x768x8, linelength=1024, pages=18
> > [ 0.097781] vesafb: protected mode interface info at c000:ad0c
> > [ 0.097783] vesafb: pmi: set display start = c00cad94, set palette = c00cae50
> > [ 0.097785] vesafb: scrolling: redraw
> > [ 0.097787] vesafb: Pseudocolor: size=8:8:8:8, shift=0:0:0:0
> > [ 0.097839] fb0: VESA VGA frame buffer device
> > [ 0.097913] power_supply ADP1: uevent
> > [ 0.097915] power_supply ADP1: No power supply yet
> > [ 0.097946] power_supply ADP1: power_supply_changed
> > [ 0.097951] ACPI: AC Adapter [ADP1] (on-line)
> > [ 0.097995] power_supply ADP1: power_supply_changed_work
> > [ 0.097997] power_supply ADP1: power_supply_update_gen_leds 1
> > [ 0.098003] power_supply ADP1: uevent
> > [ 0.098004] power_supply ADP1: POWER_SUPPLY_NAME=ADP1
> > [ 0.098009] power_supply ADP1: Static prop TYPE=Mains
> > [ 0.098011] power_supply ADP1: 1 dynamic props
> > [ 0.098013] power_supply ADP1: prop ONLINE=1
> > [ 0.332231] ACPI: EC: non-query interrupt received, switching to interrupt mode
> > [ 0.432875] power_supply BAT0: uevent
> > [ 0.432877] power_supply BAT0: No power supply yet
> > [ 0.432955] power_supply BAT0: power_supply_changed
> > [ 0.433020] power_supply BAT0: power_supply_changed_work
> > [ 0.458794] ACPI: Battery Slot [BAT0] (battery present)
> > [ 0.463083] hpet_resources: 0xfed00000 is busy
> > [ 0.463620] loop: module loaded
> > [ 0.463645] Linux video capture interface: v2.00
> > [ 0.463871] input: Macintosh mouse button emulation as /class/input/input0
> > [ 0.464036] Driver 'sd' needs updating - please use bus_type methods
> > [ 0.464066] Driver 'sr' needs updating - please use bus_type methods
> > [ 0.464259] ata_piix 0000:00:1f.1: version 2.12
> > [ 0.464267] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
> > [ 0.464300] PCI: Setting latency timer of device 0000:00:1f.1 to 64
> > [ 0.464373] scsi0 : ata_piix
> > [ 0.464457] scsi1 : ata_piix
> > [ 0.464974] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x40b0 irq 14
> > [ 0.464977] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x40b8 irq 15
> > [ 0.488663] power_supply BAT0: power_supply_update_bat_leds 4
> > [ 0.488669] power_supply BAT0: uevent
> > [ 0.488670] power_supply BAT0: POWER_SUPPLY_NAME=BAT0
> > [ 0.488674] power_supply BAT0: Static prop TYPE=Battery
> > [ 0.488676] power_supply BAT0: 12 dynamic props
> > [ 0.488678] power_supply BAT0: prop STATUS=Full
> > [ 0.488681] power_supply BAT0: prop PRESENT=1
> > [ 0.488683] power_supply BAT0: prop TECHNOLOGY=Unknown
> > [ 0.488685] power_supply BAT0: prop VOLTAGE_MIN_DESIGN=10800000
> > [ 0.488688] power_supply BAT0: prop VOLTAGE_NOW=12453000
> > [ 0.488690] power_supply BAT0: prop CURRENT_NOW=0
> > [ 0.488692] power_supply BAT0: prop ENERGY_FULL_DESIGN=55000000
> > [ 0.488695] power_supply BAT0: prop ENERGY_FULL=53150000
> > [ 0.488697] power_supply BAT0: prop ENERGY_NOW=51380000
> > [ 0.488699] power_supply BAT0: prop MODEL_NAME=ASMB012
> > [ 0.488701] power_supply BAT0: prop MANUFACTURER=SMPN012
> > [ 0.488703] power_supply BAT0: prop SERIAL_NUMBER=
> > [ 0.266661] Switched to NOHz mode on CPU #1
> > [ 0.503310] Switched to NOHz mode on CPU #0
> > [ 0.280565] ata1.00: ATAPI: MATSHITADVD-R UJ-857D, KCV9, max UDMA/66
> > [ 0.290514] ata1.00: configured for UDMA/66
> > [ 0.509974] scsi 0:0:0:0: CD-ROM MATSHITA DVD-R UJ-857D KCV9 PQ: 0 ANSI: 5
> > [ 0.513308] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
> > [ 0.513308] Uniform CD-ROM driver Revision: 3.20
> > [ 0.513308] sr 0:0:0:0: Attached scsi CD-ROM sr0
> > [ 0.513308] sr 0:0:0:0: Attached scsi generic sg0 type 5
> > [ 0.513308] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
> > [ 0.513308] ata_piix 0000:00:1f.2: MAP [ P0 P2 -- -- ]
> > [ 0.519983] PCI: Setting latency timer of device 0000:00:1f.2 to 64
> > [ 0.520029] scsi2 : ata_piix
> > [ 0.520107] scsi3 : ata_piix
> > [ 0.520984] ata3: SATA max UDMA/133 cmd 0x40c8 ctl 0x40e4 bmdma 0x40a0 irq 19
> > [ 0.520987] ata4: SATA max UDMA/133 cmd 0x40c0 ctl 0x40e0 bmdma 0x40a8 irq 19
> > [ 0.539973] ata3.01: ATA-8: FUJITSU MHW2120BH, 00810013, max UDMA/100
> > [ 0.539973] ata3.01: 234441648 sectors, multi 16: LBA48 NCQ (depth 0/32)
> > [ 0.543810] ata3.01: configured for UDMA/100
> > [ 0.553305] scsi 2:0:1:0: Direct-Access ATA FUJITSU MHW2120B 0081 PQ: 0 ANSI: 5
> > [ 0.553305] sd 2:0:1:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
> > [ 0.553305] sd 2:0:1:0: [sda] Write Protect is off
> > [ 0.553305] sd 2:0:1:0: [sda] Mode Sense: 00 3a 00 00
> > [ 0.553305] sd 2:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> > [ 0.553305] sd 2:0:1:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
> > [ 0.553305] sd 2:0:1:0: [sda] Write Protect is off
> > [ 0.553305] sd 2:0:1:0: [sda] Mode Sense: 00 3a 00 00
> > [ 0.553305] sd 2:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> > [ 0.553305] sda: sda1 sda2 < sda5 >
> > [ 0.553305] sd 2:0:1:0: [sda] Attached SCSI disk
> > [ 0.553305] sd 2:0:1:0: Attached scsi generic sg1 type 0
> > [ 0.553305] usbcore: registered new interface driver usblcd
> > [ 0.553305] usbcore: registered new interface driver usbled
> > [ 0.553305] PNP: No PS/2 controller found. Probing ports directly.
> > [ 0.553305] i8042.c: No controller found.
> > [ 0.560048] mice: PS/2 mouse device common for all mice
> > [ 0.560112] applesmc: Apple MacBook Pro detected:
> > [ 0.560114] applesmc: - Model with accelerometer
> > [ 0.560115] applesmc: - Model with light sensors and backlight
> > [ 0.560117] applesmc: - Model with 12 temperature sensors
> > [ 0.560665] applesmc: device has already been initialized (0xe0, 0x00).
> > [ 0.560667] applesmc: device successfully initialized.
> > [ 0.560866] applesmc: 2 fans found.
> > [ 0.561508] input: applesmc as /class/input/input1
> > [ 0.561570] Registered led device: smc::kbd_backlight
> > [ 0.561607] applesmc: driver successfully loaded.
> > [ 0.561675] device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
> > [ 0.561677] EDAC MC: Ver: 2.1.0 Apr 1 2008
> > [ 0.561874] cpuidle: using governor ladder
> > [ 0.561876] cpuidle: using governor menu
> > [ 0.561912] usbcore: registered new interface driver hiddev
> > [ 0.561945] usbcore: registered new interface driver usbhid
> > [ 0.561948] drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
> > [ 0.561983] Advanced Linux Sound Architecture Driver Version 1.0.16rc2 (Thu Jan 31 16:40:16 2008 UTC).
> > [ 0.561985] ALSA device list:
> > [ 0.561986] No soundcards found.
> > [ 0.562041] oprofile: using NMI interrupt.
> > [ 0.562439] IPVS: Registered protocols (TCP, AH, ESP)
> > [ 0.562452] IPVS: Connection hash table configured (size=4096, memory=32Kbytes)
> > [ 0.562472] IPVS: ipvs loaded.
> > [ 0.562473] Initializing XFRM netlink socket
> > [ 0.562485] NET: Registered protocol family 1
> > [ 0.562493] NET: Registered protocol family 17
> > [ 0.562497] NET: Registered protocol family 15
> > [ 0.562504] Starting balanced_irq
> > [ 0.562530] Using IPI No-Shortcut mode
> > [ 0.343320] kjournald starting. Commit interval 5 seconds
> > [ 0.563305] EXT3-fs: mounted filesystem with ordered data mode.
> > [ 0.563305] VFS: Mounted root (ext3 filesystem) readonly.
> > [ 0.563305] Freeing unused kernel memory: 332k freed
> > [ 0.717700] SELinux:8192 avtab hash slots allocated. Num of rules:203526
> > [ 0.748552] SELinux:8192 avtab hash slots allocated. Num of rules:203526
> > [ 0.780144] security: 7 users, 7 roles, 2631 types, 89 bools
> > [ 0.780147] security: 69 classes, 203526 rules
> > [ 0.781474] SELinux: Completing initialization.
> > [ 0.781476] SELinux: Setting up existing superblocks.
> > [ 0.783291] SELinux: initialized (dev sda1, type ext3), uses xattr
> > [ 0.783291] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
> > [ 0.783291] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
> > [ 0.783291] SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
> > [ 0.783291] SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
> > [ 0.783291] SELinux: initialized (dev devpts, type devpts), uses transition SIDs
> > [ 0.783291] SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
> > [ 0.783291] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
> > [ 0.783291] SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
> > [ 0.783291] SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
> > [ 0.783291] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
> > [ 0.783291] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
> > [ 0.783291] SELinux: initialized (dev proc, type proc), uses genfs_contexts
> > [ 0.783291] SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
> > [ 0.783291] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
> > [ 0.783291] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
> > [ 0.783606] SELinux: policy loaded with handle_unknown=deny
> > [ 0.783613] type=1403 audit(1207283387.446:2): policy loaded auid=4294967295 ses=4294967295
> > [ 0.956623] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
> > [ 0.707038] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
> > [ 0.958218] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
> > [ 1.048272] power_supply ADP1: uevent
> > [ 1.048275] power_supply ADP1: POWER_SUPPLY_NAME=ADP1
> > [ 1.048279] power_supply ADP1: Static prop TYPE=Mains
> > [ 1.048281] power_supply ADP1: 1 dynamic props
> > [ 1.048283] power_supply ADP1: prop ONLINE=1
> > [ 1.048299] power_supply BAT0: uevent
> > [ 1.048300] power_supply BAT0: POWER_SUPPLY_NAME=BAT0
> > [ 1.048303] power_supply BAT0: Static prop TYPE=Battery
> > [ 1.048305] power_supply BAT0: 12 dynamic props
> > [ 1.748730] power_supply BAT0: prop STATUS=Full
> > [ 1.748735] power_supply BAT0: prop PRESENT=1
> > [ 1.748738] power_supply BAT0: prop TECHNOLOGY=Unknown
> > [ 1.748741] power_supply BAT0: prop VOLTAGE_MIN_DESIGN=10800000
> > [ 1.748743] power_supply BAT0: prop VOLTAGE_NOW=12452000
> > [ 1.748746] power_supply BAT0: prop CURRENT_NOW=0
> > [ 1.748748] power_supply BAT0: prop ENERGY_FULL_DESIGN=55000000
> > [ 1.748750] power_supply BAT0: prop ENERGY_FULL=53150000
> > [ 1.748753] power_supply BAT0: prop ENERGY_NOW=51380000
> > [ 1.748755] power_supply BAT0: prop MODEL_NAME=ASMB012
> > [ 1.748758] power_supply BAT0: prop MANUFACTURER=SMPN012
> > [ 1.748760] power_supply BAT0: prop SERIAL_NUMBER=
> > [ 2.259246] ACPI: SSDT 3FEB8C10, 02AE (r1 APPLE Cpu0Ist 3000 INTL 20050309)
> > [ 2.259524] ACPI: SSDT 3FEB8910, 02A0 (r1 APPLE Cpu0Cst 3001 INTL 20050309)
> > [ 2.961917] Monitor-Mwait will be used to enter C-1 state
> > [ 2.961921] Monitor-Mwait will be used to enter C-2 state
> > [ 2.961923] Monitor-Mwait will be used to enter C-3 state
> > [ 2.961985] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
> > [ 2.962013] ACPI: ACPI0007:00 is registered as cooling_device0
> > [ 2.962018] ACPI: Processor [CPU0] (supports 8 throttling states)
> > [ 2.962360] ACPI: SSDT 3FEB8F10, 0087 (r1 APPLE Cpu1Ist 3000 INTL 20050309)
> > [ 2.962570] ACPI: SSDT 3FEB7F10, 0085 (r1 APPLE Cpu1Cst 3000 INTL 20050309)
> > [ 2.283458] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
> > [ 2.283478] ACPI: ACPI0007:01 is registered as cooling_device1
> > [ 2.283482] ACPI: Processor [CPU1] (supports 8 throttling states)
> > [ 2.978015] input: Power Button (FF) as /class/input/input2
> > [ 3.003200] ACPI: Power Button (FF) [PWRF]
> > [ 3.003267] input: Lid Switch as /class/input/input3
> > [ 3.003326] ACPI: Lid Switch [LID0]
> > [ 3.003373] input: Power Button (CM) as /class/input/input4
> > [ 3.042126] ACPI: Power Button (CM) [PWRB]
> > [ 3.042198] input: Sleep Button (CM) as /class/input/input5
> > [ 3.056493] ACPI: Sleep Button (CM) [SLPB]
> > [ 3.230052] Linux agpgart interface v0.103
> > [ 3.307976] USB Universal Host Controller Interface driver v3.0
> > [ 3.308018] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
> > [ 3.308029] PCI: Setting latency timer of device 0000:00:1d.0 to 64
> > [ 3.308032] uhci_hcd 0000:00:1d.0: UHCI Host Controller
> > [ 3.308220] SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
> > [ 3.308316] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
> > [ 3.308351] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00004080
> > [ 3.308473] usb usb1: configuration #1 chosen from 1 choice
> > [ 3.308495] hub 1-0:1.0: USB hub found
> > [ 3.308501] hub 1-0:1.0: 2 ports detected
> > [ 3.387181] input: Video Bus as /class/input/input6
> > [ 3.409815] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
> > [ 3.409999] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
> > [ 3.410009] PCI: Setting latency timer of device 0000:00:1d.1 to 64
> > [ 3.410013] uhci_hcd 0000:00:1d.1: UHCI Host Controller
> > [ 3.410038] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
> > [ 3.410067] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00004060
> > [ 3.410170] usb usb2: configuration #1 chosen from 1 choice
> > [ 3.410192] hub 2-0:1.0: USB hub found
> > [ 3.410198] hub 2-0:1.0: 2 ports detected
> > [ 3.513241] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
> > [ 3.513252] PCI: Setting latency timer of device 0000:00:1d.2 to 64
> > [ 3.513256] uhci_hcd 0000:00:1d.2: UHCI Host Controller
> > [ 3.513279] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
> > [ 3.513313] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00004040
> > [ 3.513418] usb usb3: configuration #1 chosen from 1 choice
> > [ 3.513440] hub 3-0:1.0: USB hub found
> > [ 3.513446] hub 3-0:1.0: 2 ports detected
> > [ 3.619190] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
> > [ 3.619201] PCI: Setting latency timer of device 0000:00:1d.3 to 64
> > [ 3.619204] uhci_hcd 0000:00:1d.3: UHCI Host Controller
> > [ 3.619228] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
> > [ 3.619261] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00004020
> > [ 3.619367] usb usb4: configuration #1 chosen from 1 choice
> > [ 3.619390] hub 4-0:1.0: USB hub found
> > [ 3.619395] hub 4-0:1.0: 2 ports detected
> > [ 3.636455] usb 1-2: new full speed USB device using uhci_hcd and address 2
> > [ 3.651461] ath_hal: module license 'Proprietary' taints kernel.
> > [ 3.663223] ath_hal: 0.9.30.13 (AR5210, AR5211, AR5212, AR5416, RF5111, RF5112, RF2413, RF5413, RF2133)
> > [ 3.683283] wlan: svn r3221
> > [ 3.711071] ath_pci: svn r3221
> > [ 3.719918] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
> > [ 3.719932] PCI: Setting latency timer of device 0000:00:1d.7 to 64
> > [ 3.719935] ehci_hcd 0000:00:1d.7: EHCI Host Controller
> > [ 3.719961] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
> > [ 3.723823] ehci_hcd 0000:00:1d.7: debug port 1
> > [ 3.723829] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
> > [ 3.723836] ehci_hcd 0000:00:1d.7: irq 23, io mem 0x50405400
> > [ 3.759627] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
> > [ 3.759731] usb usb5: configuration #1 chosen from 1 choice
> > [ 3.759756] hub 5-0:1.0: USB hub found
> > [ 3.759762] hub 5-0:1.0: 8 ports detected
> > [ 3.853097] Marking TSC unstable due to: TSC halts in idle.
> > [ 3.183313] ACPI: PCI Interrupt 0000:0c:03.0[A] -> GSI 19 (level, low) -> IRQ 19
> > [ 3.867148] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
> > [ 3.867171] PCI: Setting latency timer of device 0000:00:1b.0 to 64
> > [ 3.893921] hda_codec: STAC922x, Apple subsys_id=106b1e00
> > [ 3.234477] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[4c004000-4c0047ff] Max Packet=[4096] IR/IT contexts=[4/8]
> > [ 3.931749] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17
> > [ 3.931762] PCI: Setting latency timer of device 0000:03:00.0 to 64
> > [ 4.061648] HAL returned 41 channels.
> > [ 4.061653] Channel 1 (2412 MHz) Max Tx Power 20 dBm (reg limited) [31 hw 20 reg] Flags CF_CCK CF_2GHZ
> > [ 4.061657] Channel 1 (2412 MHz) Max Tx Power 20 dBm (reg limited) [31 hw 20 reg] Flags CF_OFDM CF_2GHZ
> > [ 4.061660] Channel 2 (2417 MHz) Max Tx Power 20 dBm (reg limited) [31 hw 20 reg] Flags CF_CCK CF_2GHZ
> > [ 4.061663] Channel 2 (2417 MHz) Max Tx Power 20 dBm (reg limited) [31 hw 20 reg] Flags CF_OFDM CF_2GHZ
> > [ 4.061667] Channel 3 (2422 MHz) Max Tx Power 20 dBm (reg limited) [31 hw 20 reg] Flags CF_CCK CF_2GHZ
> > [ 4.061670] Channel 3 (2422 MHz) Max Tx Power 20 dBm (reg limited) [31 hw 20 reg] Flags CF_OFDM CF_2GHZ
> > [ 4.061673] Channel 4 (2427 MHz) Max Tx Power 20 dBm (reg limited) [31 hw 20 reg] Flags CF_CCK CF_2GHZ
> > [ 4.061677] Channel 4 (2427 MHz) Max Tx Power 20 dBm (reg limited) [31 hw 20 reg] Flags CF_OFDM CF_2GHZ
> > [ 4.061680] Channel 5 (2432 MHz) Max Tx Power 20 dBm (reg limited) [31 hw 20 reg] Flags CF_CCK CF_2GHZ
> > [ 4.061683] Channel 5 (2432 MHz) Max Tx Power 20 dBm (reg limited) [31 hw 20 reg] Flags CF_OFDM CF_2GHZ
> > [ 4.061687] Channel 6 (2437 MHz) Max Tx Power 20 dBm (reg limited) [31 hw 20 reg] Flags CF_CCK CF_2GHZ
> > [ 4.061690] Channel 6 (2437 MHz) Max Tx Power 20 dBm (reg limited) [31 hw 20 reg] Flags CF_OFDM CF_2GHZ
> > [ 4.061693] Channel 6 (2437 MHz) Max Tx Power 18 dBm (reg limited) [31 hw 18 reg] Flags CF_TURBO CF_OFDM CF_2GHZ
> > [ 4.061697] Channel 7 (2442 MHz) Max Tx Power 20 dBm (reg limited) [31 hw 20 reg] Flags CF_CCK CF_2GHZ
> > [ 4.061700] Channel 7 (2442 MHz) Max Tx Power 20 dBm (reg limited) [31 hw 20 reg] Flags CF_OFDM CF_2GHZ
> > [ 4.061703] Channel 8 (2447 MHz) Max Tx Power 20 dBm (reg limited) [31 hw 20 reg] Flags CF_CCK CF_2GHZ
> > [ 4.061706] Channel 8 (2447 MHz) Max Tx Power 20 dBm (reg limited) [31 hw 20 reg] Flags CF_OFDM CF_2GHZ
> > [ 4.061709] Channel 9 (2452 MHz) Max Tx Power 20 dBm (reg limited) [31 hw 20 reg] Flags CF_CCK CF_2GHZ
> > [ 4.061713] Channel 9 (2452 MHz) Max Tx Power 20 dBm (reg limited) [31 hw 20 reg] Flags CF_OFDM CF_2GHZ
> > [ 4.061716] Channel 10 (2457 MHz) Max Tx Power 20 dBm (reg limited) [31 hw 20 reg] Flags CF_CCK CF_2GHZ
> > [ 4.061719] Channel 10 (2457 MHz) Max Tx Power 20 dBm (reg limited) [31 hw 20 reg] Flags CF_OFDM CF_2GHZ
> > [ 4.061722] Channel 11 (2462 MHz) Max Tx Power 20 dBm (reg limited) [31 hw 20 reg] Flags CF_CCK CF_2GHZ
> > [ 4.061726] Channel 11 (2462 MHz) Max Tx Power 20 dBm (reg limited) [31 hw 20 reg] Flags CF_OFDM CF_2GHZ
> > [ 4.061729] Channel 36 (5180 MHz) Max Tx Power 30 dBm (reg limited) [31 hw 30 reg] Flags CF_OFDM CF_5GHZ
> > [ 4.061732] Channel 40 (5200 MHz) Max Tx Power 30 dBm (reg limited) [31 hw 30 reg] Flags CF_OFDM CF_5GHZ
> > [ 4.061736] Channel 42 (5210 MHz) Max Tx Power 15 dBm (reg limited) [31 hw 15 reg] Flags CF_TURBO CF_OFDM CF_5GHZ CF_STATIC_TURBO
> > [ 4.061739] Channel 44 (5220 MHz) Max Tx Power 30 dBm (reg limited) [31 hw 30 reg] Flags CF_OFDM CF_5GHZ
> > [ 4.061742] Channel 48 (5240 MHz) Max Tx Power 30 dBm (reg limited) [31 hw 30 reg] Flags CF_OFDM CF_5GHZ
> > [ 4.061746] Channel 50 (5250 MHz) Max Tx Power 15 dBm (reg limited) [31 hw 15 reg] Flags CF_TURBO CF_OFDM CF_5GHZ CF_PASSIVE_SCAN_ONLY CF_STATIC_TURBO PF_DFS_REQUIRED
> > [ 4.061750] Channel 52 (5260 MHz) Max Tx Power 30 dBm (reg limited) [31 hw 30 reg] Flags CF_OFDM CF_5GHZ CF_PASSIVE_SCAN_ONLY PF_DFS_REQUIRED
> > [ 4.061754] Channel 56 (5280 MHz) Max Tx Power 30 dBm (reg limited) [31 hw 30 reg] Flags CF_OFDM CF_5GHZ CF_PASSIVE_SCAN_ONLY PF_DFS_REQUIRED
> > [ 4.061758] Channel 58 (5290 MHz) Max Tx Power 18 dBm (reg limited) [31 hw 18 reg] Flags CF_TURBO CF_OFDM CF_5GHZ CF_PASSIVE_SCAN_ONLY CF_STATIC_TURBO PF_DFS_REQUIRED
> > [ 4.061762] Channel 60 (5300 MHz) Max Tx Power 30 dBm (reg limited) [31 hw 30 reg] Flags CF_OFDM CF_5GHZ CF_PASSIVE_SCAN_ONLY PF_DFS_REQUIRED
> > [ 4.061766] Channel 64 (5320 MHz) Max Tx Power 30 dBm (reg limited) [31 hw 30 reg] Flags CF_OFDM CF_5GHZ CF_PASSIVE_SCAN_ONLY PF_DFS_REQUIRED
> > [ 4.061769] Channel 149 (5745 MHz) Max Tx Power 30 dBm (reg limited) [31 hw 30 reg] Flags CF_OFDM CF_5GHZ
> > [ 4.061773] Channel 152 (5760 MHz) Max Tx Power 20 dBm (reg limited) [31 hw 20 reg] Flags CF_TURBO CF_OFDM CF_5GHZ CF_STATIC_TURBO
> > [ 4.061776] Channel 153 (5765 MHz) Max Tx Power 30 dBm (reg limited) [31 hw 30 reg] Flags CF_OFDM CF_5GHZ
> > [ 4.061779] Channel 157 (5785 MHz) Max Tx Power 30 dBm (reg limited) [31 hw 30 reg] Flags CF_OFDM CF_5GHZ
> > [ 4.061783] Channel 160 (5800 MHz) Max Tx Power 20 dBm (reg limited) [31 hw 20 reg] Flags CF_TURBO CF_OFDM CF_5GHZ CF_STATIC_TURBO
> > [ 4.061786] Channel 161 (5805 MHz) Max Tx Power 30 dBm (reg limited) [31 hw 30 reg] Flags CF_OFDM CF_5GHZ
> > [ 4.061790] Channel 165 (5825 MHz) Max Tx Power 30 dBm (reg limited) [31 hw 30 reg] Flags CF_OFDM CF_5GHZ
> > [ 4.061792] ath_pci: switching rfkill capability off
> > [ 4.080224] ath_rate_sample: 1.2 (svn r3221)
> > [ 4.080224] ath_pci: switching per-packet transmit power control off
> > [ 4.080224] wifi0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
> > [ 4.080224] wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
> > [ 4.080224] wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
> > [ 4.080224] wifi0: turboA rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
> > [ 4.080224] wifi0: turboG rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
> > [ 4.080224] wifi0: H/W encryption support: WEP AES AES_CCM TKIP
> > [ 4.080224] wifi0: mac 12.10 phy 8.1 radio 12.0
> > [ 4.080224] wifi0: Use hw queue 1 for WME_AC_BE traffic
> > [ 4.080224] wifi0: Use hw queue 0 for WME_AC_BK traffic
> > [ 4.080224] wifi0: Use hw queue 2 for WME_AC_VI traffic
> > [ 4.080224] wifi0: Use hw queue 3 for WME_AC_VO traffic
> > [ 4.080224] wifi0: Use hw queue 8 for CAB traffic
> > [ 4.080224] wifi0: Use hw queue 9 for beacons
> > [ 4.113529] wifi0: Atheros 5418: mem=0x50100000, irq=17
> > [ 4.258239] usb 1-2: device not accepting address 2, error -71
> > [ 4.268120] Clocksource tsc unstable (delta = -146744094 ns)
> > [ 4.717932] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
> > [ 4.446532] usb 5-4: new high speed USB device using ehci_hcd and address 3
> > [ 5.177113] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0019e3fffe2ad87e]
> > [ 5.254452] usb 5-4: configuration #1 chosen from 1 choice
> > [ 5.019550] usbcore: registered new interface driver appletouch
> > [ 5.792179] Symbol init_mm is marked as UNUSED, however this module is using it.
> > [ 5.792183] This symbol will go away in the future.
> > [ 5.792185] Please evalute if this is the right api to use, and if it really is, submit a report the linux kernel mailinglist together with submitting your code for inclusion.
> > [ 5.808566] [fglrx] Maximum main memory to use for locked dma buffers: 913 MBytes.
> > [ 5.808594] [fglrx] ASYNCIO init succeed!
> > [ 5.810559] [fglrx] PAT is enabled successfully!
> > [ 5.810581] [fglrx] module loaded - fglrx 8.47.3 [Feb 25 2008] on minor 0
> > [ 5.925496] usb 1-2: new full speed USB device using uhci_hcd and address 4
> > [ 5.991088] intelfb: Framebuffer driver for Intel(R) 830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM chipsets
> > [ 5.991091] intelfb: Version 0.9.4
> > [ 6.039295] Console: switching to colour frame buffer device 128x48
> > [ 6.087454] ip_tables: (C) 2000-2006 Netfilter Core Team
> > [ 5.413970] usb 1-2: configuration #1 chosen from 1 choice
> > [ 5.420713] input: Apple Computer Apple Internal Keyboard / Trackpad as /class/input/input7
> > [ 5.445334] input: USB HID v1.11 Keyboard [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.0-2
> > [ 5.450550] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
> > [ 6.137835] appletouch: Geyser mode initialized.
> > [ 6.137893] input: appletouch as /class/input/input8
> > [ 6.155056] input: Apple Computer Apple Internal Keyboard / Trackpad as /class/input/input9
> > [ 6.155056] arp_tables: (C) 2002 David S. Miller
> > [ 6.155464] input: USB HID v1.11 Device [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.0-2
> > [ 6.212641] ieee80211_crypt: registered algorithm 'NULL'
> > [ 6.215127] ieee80211_crypt: registered algorithm 'TKIP'
> > [ 6.343049] Adding 2988048k swap on /dev/disk/by-uuid/c58cdc7c-b94b-4116-9cca-bf154269e4d8. Priority:-1 extents:1 across:2988048k
> > [ 6.391922] usb 3-2: new full speed USB device using uhci_hcd and address 2
> > [ 5.741741] EXT3 FS on sda1, internal journal
> > [ 6.565336] usb 3-2: configuration #1 chosen from 1 choice
> > [ 5.900025] hiddev0: USB HID v1.11 Device [Apple Computer, Inc. IR Receiver] on usb-0000:00:1d.2-2
> > [ 6.132611] usb 4-1: new full speed USB device using uhci_hcd and address 2
> > [ 6.324999] usb 4-1: configuration #1 chosen from 1 choice
> > [ 7.019276] input: HID 05ac:1000 as /class/input/input10
> > [ 7.046429] input: USB HID v1.11 Keyboard [HID 05ac:1000] on usb-0000:00:1d.3-1
> > [ 7.065228] input: HID 05ac:1000 as /class/input/input11
> > [ 7.086132] input: USB HID v1.11 Mouse [HID 05ac:1000] on usb-0000:00:1d.3-1
> > [ 6.416101] uvcvideo: Found UVC 1.00 device Built-in iSight (05ac:8501)
> > [ 6.418848] uvcvideo: Failed to query (135) UVC control 1 (unit 0) : -32 (exp. 26).
> > [ 6.419743] input: Built-in iSight as /class/input/input12
> > [ 6.446317] usbcore: registered new interface driver uvcvideo
> > [ 6.446323] USB Video Class driver (SVN r198)
> > [ 7.809391] usb 5-4: USB disconnect, address 3
> > [ 9.060971] appletouch: incomplete data package (first byte: 2, length: 4).
> > [ 9.539766] usb 5-4: new high speed USB device using ehci_hcd and address 6
> > [ 9.641888] usb 5-4: configuration #1 chosen from 1 choice
> > [ 9.642174] uvcvideo: Found UVC 1.00 device Built-in iSight (05ac:8501)
> > [ 9.644653] uvcvideo: Failed to query (135) UVC control 1 (unit 0) : -32 (exp. 26).
> > [ 9.645339] input: Built-in iSight as /class/input/input13
> > [ 10.138778] input: Pommed beeper device as /class/input/input14
> > [ 10.241566] Bluetooth: Core ver 2.11
> > [ 10.243725] NET: Registered protocol family 31
> > [ 10.243728] Bluetooth: HCI device and connection manager initialized
> > [ 10.243731] Bluetooth: HCI socket layer initialized
> > [ 10.299125] Bluetooth: L2CAP ver 2.9
> > [ 10.299125] Bluetooth: L2CAP socket layer initialized
> > [ 9.675457] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
> > [ 9.694644] usb 4-1: usbfs: USBDEVFS_CONTROL failed cmd hid2hci rqt 64 rq 0 len 0 ret -84
> > [ 10.354197] Bluetooth: RFCOMM socket layer initialized
> > [ 10.354776] Bluetooth: RFCOMM TTY layer initialized
> > [ 10.354779] Bluetooth: RFCOMM ver 1.8
> > [ 10.589269] usb 4-1: USB disconnect, address 2
> > [ 10.824926] usb 4-1: new full speed USB device using uhci_hcd and address 3
> > [ 11.015363] usb 4-1: configuration #1 chosen from 1 choice
> > [ 11.086051] Bluetooth: HCI USB driver ver 2.9
> > [ 11.089237] usbcore: registered new interface driver hci_usb
> > [ 10.603936] CPU0 attaching NULL sched-domain.
> > [ 10.603942] CPU1 attaching NULL sched-domain.
> > [ 10.613659] CPU0 attaching sched-domain:
> > [ 10.613663] domain 0: span 3
> > [ 10.613665] groups: 1 2
> > [ 10.613668] domain 1: span 3
> > [ 10.613669] groups: 3
> > [ 10.613672] CPU1 attaching sched-domain:
> > [ 10.613673] domain 0: span 3
> > [ 10.613675] groups: 2 1
> > [ 10.613677] domain 1: span 3
> > [ 10.613678] groups: 3
> > [ 16.099935] input: Apple Computer, Inc. Mighty Mouse as /class/input/input15
> > [ 20.975690] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
> > [ 23.378169] [fglrx] Reserve Block - 0 offset = 0X7ffb000 length = 0X5000
> > [ 23.378175] [fglrx] Reserve Block - 1 offset = 0X0 length = 0X1000000
> > [ 23.378177] [fglrx] Reserve Block - 2 offset = 0X7fbb000 length = 0X40000
> > [ 24.167068] [fglrx] interrupt source 20008000 successfully enabled
> > [ 24.167068] [fglrx] enable ID = 0x00000008
> > [ 24.167068] [fglrx] Receive enable interrupt message with irqEnableMask: 20008000
> > [ 24.167068] [fglrx] interrupt source 10000000 successfully enabled
> > [ 24.167068] [fglrx] enable ID = 0x00000009
> > [ 24.167068] [fglrx] Receive enable interrupt message with irqEnableMask: 10000000
> > [ 144.557848] applesmc: wait status failed: 5 != 4
> > [ 144.358566] applesmc: wait status failed: c != 8
> > [ 144.409864] PM: Syncing filesystems ... done.
> > [ 145.650031] Freezing user space processes ... (elapsed 0.11 seconds) done.
> > [ 145.764634] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
> > [ 145.764693] Suspending console(s)
> > [ 145.829398] sd 2:0:1:0: [sda] Synchronizing SCSI cache
> > [ 145.829602] sd 2:0:1:0: [sda] Stopping disk
> > [ 146.795569] ACPI: PCI interrupt for device 0000:03:00.0 disabled
> > [ 146.808867] [fglrx] firegl_gps_setpowerdown .
> > [ 146.840196] ACPI: PCI interrupt for device 0000:01:00.0 disabled
> > [ 146.840417] ACPI: PCI interrupt for device 0000:00:1f.2 disabled
> > [ 146.852207] ACPI: PCI interrupt for device 0000:00:1f.1 disabled
> > [ 146.852379] ACPI: PCI interrupt for device 0000:00:1d.7 disabled
> > [ 146.865455] ACPI: PCI interrupt for device 0000:00:1d.3 disabled
> > [ 146.865501] ACPI: PCI interrupt for device 0000:00:1d.2 disabled
> > [ 146.865547] ACPI: PCI interrupt for device 0000:00:1d.1 disabled
> > [ 146.865591] ACPI: PCI interrupt for device 0000:00:1d.0 disabled
> > [ 146.865795] ACPI: PCI interrupt for device 0000:00:1b.0 disabled
> > [ 146.880615] ACPI: Preparing to enter system sleep state S3
> > [ 146.881357] Disabling non-boot CPUs ...
> > [ 146.881373] CPU0 attaching NULL sched-domain.
> > [ 146.881377] CPU1 attaching NULL sched-domain.
> > [ 146.992026] CPU 1 is now offline
> > [ 146.992031] SMP alternatives: switching to UP code
> > [ 146.993980] CPU0 attaching sched-domain:
> > [ 146.993984] domain 0: span 1
> > [ 146.993987] groups: 1
> > [ 146.994265] CPU1 is down
> > [ 146.994265] Intel machine check architecture supported.
> > [ 146.994271] Intel machine check reporting enabled on CPU#0.
> > [ 146.994309] Back to C!
> > [ 146.995386] Enabling non-boot CPUs ...
> > [ 146.995451] CPU0 attaching NULL sched-domain.
> > [ 146.995560] SMP alternatives: switching to SMP code
> > [ 146.998683] Booting processor 1/1 ip 4000
> > [ 147.295547] Initializing CPU#1
> > [ 147.295547] masked ExtINT on CPU#1
> > [ 147.295547] Calibrating delay using timer specific routine.. 4324.69 BogoMIPS (lpj=7204309)
> > [ 147.295547] CPU: L1 I cache: 32K, L1 D cache: 32K
> > [ 147.295547] CPU: L2 cache: 4096K
> > [ 147.295547] CPU: Physical Processor ID: 0
> > [ 147.295547] CPU: Processor Core ID: 1
> > [ 147.295547] Intel machine check architecture supported.
> > [ 147.295547] Intel machine check reporting enabled on CPU#1.
> > [ 147.092674] CPU1: Intel(R) Core(TM)2 CPU T7400 @ 2.16GHz stepping 06
> > [ 147.092726] CPU0 attaching sched-domain:
> > [ 147.092729] domain 0: span 3
> > [ 147.092730] groups: 1 2
> > [ 147.092732] domain 1: span 3
> > [ 147.092734] groups: 3
> > [ 147.092736] CPU1 attaching sched-domain:
> > [ 147.092737] domain 0: span 3
> > [ 147.092738] groups: 2 1
> > [ 147.092740] domain 1: span 3
> > [ 147.092742] groups: 3
> > [ 147.295547] CPU1 is up
> > [ 147.295552] Switched to NOHz mode on CPU #1
> > [ 147.792197] ACPI: EC: missing OBF confirmation, don't expect it any longer.
> > [ 148.292164] ACPI: EC: missing write data confirmation, don't expect it any longer.
> > [ 148.601213] PM: Writing back config space on device 0000:00:01.0 at offset f (was 80100, writing 8010b)
> > [ 148.601225] PM: Writing back config space on device 0000:00:01.0 at offset a (was f, writing 0)
> > [ 148.601232] PM: Writing back config space on device 0000:00:01.0 at offset 9 (was 1fff1, writing 47f14001)
> > [ 148.601239] PM: Writing back config space on device 0000:00:01.0 at offset 8 (was fff0, writing 50305030)
> > [ 148.601246] PM: Writing back config space on device 0000:00:01.0 at offset 7 (was f0, writing 3030)
> > [ 148.601253] PM: Writing back config space on device 0000:00:01.0 at offset 6 (was 0, writing 10100)
> > [ 148.601261] PM: Writing back config space on device 0000:00:01.0 at offset 3 (was 10000, writing 10040)
> > [ 148.601269] PM: Writing back config space on device 0000:00:01.0 at offset 1 (was 100000, writing 100007)
> > [ 148.601300] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
> > [ 148.601309] PCI: Setting latency timer of device 0000:00:01.0 to 64
> > [ 148.601320] PM: Writing back config space on device 0000:00:07.0 at offset f (was 100, writing 10b)
> > [ 148.601337] PM: Writing back config space on device 0000:00:07.0 at offset 4 (was 0, writing 50404000)
> > [ 148.601346] PM: Writing back config space on device 0000:00:07.0 at offset 1 (was b00000, writing b00002)
> > [ 148.612161] PM: Writing back config space on device 0000:00:1b.0 at offset f (was 100, writing 10a)
> > [ 148.612187] PM: Writing back config space on device 0000:00:1b.0 at offset 4 (was 4, writing 50400004)
> > [ 148.612196] PM: Writing back config space on device 0000:00:1b.0 at offset 3 (was 0, writing 40)
> > [ 148.612206] PM: Writing back config space on device 0000:00:1b.0 at offset 1 (was 100000, writing 100002)
> > [ 148.612236] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
> > [ 148.612247] PCI: Setting latency timer of device 0000:00:1b.0 to 64
> > [ 148.612295] PM: Writing back config space on device 0000:00:1c.0 at offset 9 (was 10001, writing 50515051)
> > [ 148.612304] PM: Writing back config space on device 0000:00:1c.0 at offset 8 (was 0, writing 50205020)
> > [ 148.612312] PM: Writing back config space on device 0000:00:1c.0 at offset 7 (was 20000000, writing 2020)
> > [ 148.612326] PM: Writing back config space on device 0000:00:1c.0 at offset 3 (was 810000, writing 810040)
> > [ 148.612336] PM: Writing back config space on device 0000:00:1c.0 at offset 1 (was 100000, writing 100007)
> > [ 148.612388] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
> > [ 148.612397] PCI: Setting latency timer of device 0000:00:1c.0 to 64
> > [ 148.612429] PM: Writing back config space on device 0000:00:1c.1 at offset 9 (was 10001, writing 1fff1)
> > [ 148.612438] PM: Writing back config space on device 0000:00:1c.1 at offset 8 (was 0, writing 50105010)
> > [ 148.612447] PM: Writing back config space on device 0000:00:1c.1 at offset 7 (was 20000000, writing 200000f0)
> > [ 148.612460] PM: Writing back config space on device 0000:00:1c.1 at offset 3 (was 810000, writing 810040)
> > [ 148.612471] PM: Writing back config space on device 0000:00:1c.1 at offset 1 (was 100000, writing 100007)
> > [ 148.612522] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 16
> > [ 148.612531] PCI: Setting latency timer of device 0000:00:1c.1 to 64
> > [ 148.612563] PM: Writing back config space on device 0000:00:1c.2 at offset 9 (was 10001, writing 4bf14801)
> > [ 148.612572] PM: Writing back config space on device 0000:00:1c.2 at offset 8 (was 0, writing 50004c10)
> > [ 148.612580] PM: Writing back config space on device 0000:00:1c.2 at offset 7 (was 20000000, writing 1010)
> > [ 148.612594] PM: Writing back config space on device 0000:00:1c.2 at offset 3 (was 810000, writing 810040)
> > [ 148.612604] PM: Writing back config space on device 0000:00:1c.2 at offset 1 (was 100000, writing 100007)
> > [ 148.612656] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
> > [ 148.612664] PCI: Setting latency timer of device 0000:00:1c.2 to 64
> > [ 148.612675] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
> > [ 148.612686] PCI: Setting latency timer of device 0000:00:1d.0 to 64
> > [ 148.612748] usb usb1: root hub lost power or was reset
> > [ 148.612777] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
> > [ 148.612787] PCI: Setting latency timer of device 0000:00:1d.1 to 64
> > [ 148.612848] usb usb2: root hub lost power or was reset
> > [ 148.612871] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
> > [ 148.612881] PCI: Setting latency timer of device 0000:00:1d.2 to 64
> > [ 148.612942] usb usb3: root hub lost power or was reset
> > [ 148.612969] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
> > [ 148.612979] PCI: Setting latency timer of device 0000:00:1d.3 to 64
> > [ 148.613041] usb usb4: root hub lost power or was reset
> > [ 148.625479] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
> > [ 148.625490] PCI: Setting latency timer of device 0000:00:1d.7 to 64
> > [ 148.625572] PM: Writing back config space on device 0000:00:1e.0 at offset 9 (was 10001, writing 1fff1)
> > [ 148.625580] PM: Writing back config space on device 0000:00:1e.0 at offset 8 (was 0, writing 4c004c00)
> > [ 148.625589] PM: Writing back config space on device 0000:00:1e.0 at offset 7 (was 22800000, writing 228000f0)
> > [ 148.625606] PM: Writing back config space on device 0000:00:1e.0 at offset 1 (was 100000, writing 100007)
> > [ 148.625635] PCI: Setting latency timer of device 0000:00:1e.0 to 64
> > [ 148.625704] PM: Writing back config space on device 0000:00:1f.1 at offset f (was 100, writing 10b)
> > [ 148.625736] PM: Writing back config space on device 0000:00:1f.1 at offset 1 (was 2800001, writing 2800005)
> > [ 148.625750] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
> > [ 148.625759] PCI: Setting latency timer of device 0000:00:1f.1 to 64
> > [ 148.638818] PM: Writing back config space on device 0000:00:1f.2 at offset f (was 200, writing 20b)
> > [ 148.638851] PM: Writing back config space on device 0000:00:1f.2 at offset 1 (was 2b00003, writing 2b00007)
> > [ 148.638875] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
> > [ 148.638885] PCI: Setting latency timer of device 0000:00:1f.2 to 64
> > [ 148.642171] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
> > [ 148.642181] PCI: Setting latency timer of device 0000:01:00.0 to 64
> > [ 148.651132] [fglrx] firegl_gps_setpowerup .
> > [ 148.656530] PM: Writing back config space on device 0000:02:00.0 at offset f (was 100, writing 10b)
> > [ 148.656545] PM: Writing back config space on device 0000:02:00.0 at offset c (was 0, writing fffe0000)
> > [ 148.656567] PM: Writing back config space on device 0000:02:00.0 at offset 6 (was 1, writing 2001)
> > [ 148.656579] PM: Writing back config space on device 0000:02:00.0 at offset 4 (was 4, writing 50200004)
> > [ 148.656588] PM: Writing back config space on device 0000:02:00.0 at offset 3 (was 0, writing 40)
> > [ 148.656600] PM: Writing back config space on device 0000:02:00.0 at offset 1 (was 40100000, writing 100007)
> > [ 148.668840] PM: Writing back config space on device 0000:03:00.0 at offset f (was 1ff, writing 10a)
> > [ 148.668874] PM: Writing back config space on device 0000:03:00.0 at offset 4 (was 4, writing 50100004)
> > [ 148.668884] PM: Writing back config space on device 0000:03:00.0 at offset 3 (was 0, writing 40)
> > [ 148.668896] PM: Writing back config space on device 0000:03:00.0 at offset 1 (was 100000, writing 100007)
> > [ 148.668941] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17
> > [ 148.668952] PCI: Setting latency timer of device 0000:03:00.0 to 64
> > [ 148.685507] PM: Writing back config space on device 0000:0c:03.0 at offset 5 (was 0, writing 4c000000)
> > [ 148.685516] PM: Writing back config space on device 0000:0c:03.0 at offset 4 (was 0, writing 4c004000)
> > [ 148.685525] PM: Writing back config space on device 0000:0c:03.0 at offset 3 (was 0, writing f810)
> > [ 148.685537] PM: Writing back config space on device 0000:0c:03.0 at offset 1 (was 2100000, writing 2100016)
> > [ 148.736588] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[4c004000-4c0047ff] Max Packet=[4096] IR/IT contexts=[4/8]
> > [ 148.740881] sd 2:0:1:0: [sda] Starting disk
> > [ 148.708902] ata3.01: ACPI cmd ef/03:0c:00:00:00:b0 filtered out
> > [ 148.708908] ata3.01: ACPI cmd ef/03:45:00:00:00:b0 filtered out
> > [ 148.722524] ata3.01: configured for UDMA/100
> > [ 148.939395] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out
> > [ 148.939401] ata1.00: ACPI cmd ef/03:44:00:00:00:a0 filtered out
> > [ 148.731368] sd 2:0:1:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
> > [ 148.731393] sd 2:0:1:0: [sda] Write Protect is off
> > [ 148.731397] sd 2:0:1:0: [sda] Mode Sense: 00 3a 00 00
> > [ 148.731433] sd 2:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> > [ 148.731664] applesmc: device has already been initialized (0xe0, 0x00).
> > [ 149.105985] ata1.00: configured for UDMA/66
> > [ 148.962313] Restarting tasks ... <6>usb 1-2: USB disconnect, address 4
> > [ 149.003406] done.
> > [ 149.068591] Buffer I/O error on device sr0, logical block 356490
> > [ 149.068601] Buffer I/O error on device sr0, logical block 356491
> > [ 149.068606] Buffer I/O error on device sr0, logical block 356492
> > [ 149.068612] Buffer I/O error on device sr0, logical block 356493
> > [ 149.068617] Buffer I/O error on device sr0, logical block 356494
> > [ 149.068621] Buffer I/O error on device sr0, logical block 356495
> > [ 149.068627] Buffer I/O error on device sr0, logical block 356496
> > [ 149.068632] Buffer I/O error on device sr0, logical block 356497
> > [ 149.068637] Buffer I/O error on device sr0, logical block 356498
> > [ 149.068642] Buffer I/O error on device sr0, logical block 356499
> > [ 149.135499] input: appletouch disconnected
> > [ 149.325200] usb 1-2: new full speed USB device using uhci_hcd and address 5
> > [ 149.358524] usb 1-2: configuration #1 chosen from 1 choice
> > [ 149.365428] input: Apple Computer Apple Internal Keyboard / Trackpad as /class/input/input16
> > [ 149.371879] input: USB HID v1.11 Keyboard [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.0-2
> > [ 149.376222] appletouch: Geyser mode initialized.
> > [ 149.376267] input: appletouch as /class/input/input17
> > [ 149.379214] appletouch: incomplete data package (first byte: 2, length: 4).
> > [ 149.384253] input: Apple Computer Apple Internal Keyboard / Trackpad as /class/input/input18
> > [ 149.388556] input: USB HID v1.11 Device [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.0-2
> > [ 149.391464] usb 3-2: USB disconnect, address 2
> > [ 149.591643] usb 3-2: new full speed USB device using uhci_hcd and address 3
> > [ 149.761008] usb 3-2: configuration #1 chosen from 1 choice
> > [ 149.767228] hiddev0: USB HID v1.11 Device [Apple Computer, Inc. IR Receiver] on usb-0000:00:1d.2-2
> > [ 149.767228] usb 4-1: USB disconnect, address 3
> > [ 150.390816] usb 4-1: new full speed USB device using uhci_hcd and address 4
> > [ 150.874557] usb 4-1: new full speed USB device using uhci_hcd and address 5
> > [ 151.045882] usb 4-1: configuration #1 chosen from 1 choice
> > [ 151.072274] input: HID 05ac:1000 as /class/input/input19
> > [ 151.074648] input: USB HID v1.11 Keyboard [HID 05ac:1000] on usb-0000:00:1d.3-1
> > [ 151.089934] input: HID 05ac:1000 as /class/input/input20
> > [ 151.089934] input: USB HID v1.11 Mouse [HID 05ac:1000] on usb-0000:00:1d.3-1
> > [ 153.773933] printk: 1322 messages suppressed.
> > [ 153.773943] Buffer I/O error on device sr0, logical block 357112
> >
> >
>



--
Justin P. Mattock


\
 
 \ /
  Last update: 2008-04-04 17:09    [W:0.123 / U:0.476 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site