Messages in this thread | | | Date | Fri, 4 Apr 2008 15:41:31 +0200 | From | "Simon Braunschmidt" <> | Subject | [kbuild, arch/arm] - kernel images do not reflect changed .config |
| |
Hi
Problem: After changing anything in the .config, updated objects get only into arch/arm/boot/Image but not into the other targets.
Steps to reproduce: -checkout clean 2.6.24 -change in Makefile: ARCH=arm CROSS_COMPILE=arm-none-linux-gnueabi- (codesourcery toolchain to support armv7 (cortex a8)) then: #make integrator_defconfig (I tried integrator_defconfig and omap_osk_5912_defconfig) #make uImage #ls -la arch/arm/boot #ls -la arch/arm/boot/compressed -note the size of : boot/Image boot/zImage boot/uImage compressed/vmlinux compressed/piggy.gz compressed/piggy.o
-now change the .config, for example deactivate FP emulator and binformat support -save your .config #make distclean -restore your .config #make uImage
only boot/Image and compressed/piggy.gz will have changed, even after distclean. Weird.
Is this already fixed? I'm sorry I cannot check easily since i'm not allowed to use git in my corporate environment. *duck*
Regards, Gruessla Simon Braunschmidt
| |