lkml.org 
[lkml]   [2008]   [Apr]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
Subjectpata_jmicron: no drives found on post 2.6.25 kernels
Hi,
I noticed that with recent (git-current) kernels pata_jmicron does not
detect the drives attached to the controller. This is the boot log with
ATA_DEBUG (kernel is 0ff5ce7f):

[ 74.364721] IOAPIC[0]: Set routing entry (2-17 -> 0x81 -> IRQ 17 Mode:1 Active:1)
[ 74.364724] ACPI: PCI Interrupt 0000:02:00.1[B] -> GSI 17 (level, low) -> IRQ 17
[ 74.365349] ata_host_alloc: ENTER
[ 74.365889] ata_port_alloc: ENTER
[ 74.366439] ata_port_alloc: ENTER
[ 74.367002] PCI: Setting latency timer of device 0000:02:00.1 to 64
[ 74.367016] __ata_port_freeze: ata4294967295 port frozen
[ 74.367590] __ata_port_freeze: ata4294967295 port frozen
[ 74.368200] scsi8 : pata_jmicron
[ 74.369129] scsi9 : pata_jmicron
[ 74.370719] ata9: PATA max UDMA/100 cmd 0xac00 ctl 0xa880 bmdma 0xa400 irq 17
[ 74.371320] ata10: PATA max UDMA/100 cmd 0xa800 ctl 0xa480 bmdma 0xa408 irq 17
[ 74.371922] ata_host_register: probe begin
[ 74.372492] ata_port_schedule_eh: port EH scheduled
[ 74.372552] ata_scsi_error: ENTER
[ 74.372553] ata_port_flush_task: ENTER
[ 74.372555] ata9: ata_port_flush_task: EXIT
[ 74.374263] ata_eh_link_autopsy: ENTER
[ 74.374834] ata_eh_recover: ENTER
[ 74.375395] __ata_port_freeze: ata9 port frozen
[ 74.375974] ata_sff_softreset: ENTER
[ 74.376560] ata_sff_softreset: about to softreset, devmask=0
[ 74.377149] ata_bus_softreset: ata9: bus reset via SRST
[ 74.377782] ata_eh_recover: EXIT, rc=0
[ 74.378362] ata_scsi_error: EXIT
[ 74.378930] ata_eh_recover: EXIT, rc=0
[ 74.379503] ata_scsi_error: EXIT
[ 74.518163] ata_sff_softreset: EXIT, classes[0]=9 [1]=9
[ 74.518782] ata_std_postreset: ENTER
[ 74.535319] ata_std_postreset: EXIT
[ 74.535894] ata_sff_postreset: EXIT, no device
[ 74.536502] ata_eh_thaw_port: ata9 port thawed
[ 74.537085] ata_eh_revalidate_and_attach: ENTER
[ 74.537672] ata_eh_recover: EXIT, rc=0
[ 74.538248] ata_scsi_error: EXIT
[ 74.550074] ata_port_schedule_eh: port EH scheduled
[ 74.550078] ata_scsi_error: ENTER
[ 74.550080] ata_port_flush_task: ENTER
[ 74.550082] ata10: ata_port_flush_task: EXIT
[ 74.551850] ata_eh_link_autopsy: ENTER
[ 74.552420] ata_eh_recover: ENTER
[ 74.552986] __ata_port_freeze: ata10 port frozen
[ 74.553572] ata_sff_softreset: ENTER
[ 74.554177] ata_sff_softreset: about to softreset, devmask=0
[ 74.554787] ata_bus_softreset: ata10: bus reset via SRST
[ 74.567885] ata_sff_softreset: EXIT, classes[0]=9 [1]=9
[ 74.568513] ata_std_postreset: ENTER
[ 74.711145] ata_std_postreset: EXIT
[ 74.711727] ata_sff_postreset: EXIT, no device
[ 74.721846] ata10: abnormal Status 0x7F
[ 74.721867] ata_eh_thaw_port: ata10 port thawed
[ 74.722476] ata_eh_revalidate_and_attach: ENTER
[ 74.723083] ata_eh_recover: EXIT, rc=0
[ 74.723665] ata_scsi_error: EXIT
[ 74.737866] ata_host_register: host probe begin
[ 74.738485] ata_port_schedule_eh: port EH scheduled
[ 74.738488] ata_scsi_error: ENTER
[ 74.738489] ata_port_flush_task: ENTER
[ 74.738491] ata9: ata_port_flush_task: EXIT
[ 74.738499] ata_eh_link_autopsy: ENTER
[ 74.738501] ata_eh_recover: ENTER
[ 74.738502] ata_eh_revalidate_and_attach: ENTER
[ 74.738504] ata_eh_recover: EXIT, rc=0
[ 74.738506] ata_scsi_error: EXIT
[ 74.743134] ata_port_schedule_eh: port EH scheduled
[ 74.743141] ata_scsi_error: ENTER
[ 74.743143] ata_port_flush_task: ENTER
[ 74.743144] ata10: ata_port_flush_task: EXIT
[ 74.743153] ata_eh_link_autopsy: ENTER
[ 74.743155] ata_eh_recover: ENTER
[ 74.743156] ata_eh_revalidate_and_attach: ENTER
[ 74.743158] ata_eh_recover: EXIT, rc=0
[ 74.743160] ata_scsi_error: EXIT

The controller has 2 optical drives attached; the first non-working kernel
according to the logs is b69d398 (this is the first one that I tried after
2.6.25, I've *not* bisected - yet). The last known working is 2.6.25, which
shows:

[ 1.738722] PCI: Enabling device 0000:02:00.1 (0000 -> 0001)
[ 1.740145] IOAPIC[0]: Set routing entry (2-17 -> 0x79 -> IRQ 17 Mode:1 Active:1)
[ 1.740149] ACPI: PCI Interrupt 0000:02:00.1[B] -> GSI 17 (level, low) -> IRQ 17
[ 1.742572] PCI: Setting latency timer of device 0000:02:00.1 to 64
[ 1.742720] scsi0 : pata_jmicron
[ 1.744310] scsi1 : pata_jmicron
[ 1.749367] ata1: PATA max UDMA/100 cmd 0xac00 ctl 0xa880 bmdma 0xa400 irq 17
[ 1.752234] ata2: PATA max UDMA/100 cmd 0xa800 ctl 0xa480 bmdma 0xa408 irq 17
[ 1.160600] ata1.00: ATAPI: HL-DT-ST DVDRAM GSA-4167B, DL13, max UDMA/33
[ 1.164104] ata1.01: ATAPI: WAITEC ALADAR/1, 0.010000, max UDMA/33
[ 1.788122] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input1
[ 1.232612] ata1.00: configured for UDMA/33
[ 1.248741] ata1.01: configured for UDMA/33
[ 1.848126] scsi 0:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-4167B DL13 PQ: 0 ANSI: 5
[ 1.863120] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.864130] Uniform CD-ROM driver Revision: 3.20
[ 1.868305] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 1.868513] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 1.872777] scsi 0:0:1:0: CD-ROM WAITEC ALADAR/1 B1.5 PQ: 0 ANSI: 5
[ 1.881239] sr1: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
[ 1.884241] sr 0:0:1:0: Attached scsi CD-ROM sr1
[ 1.884356] sr 0:0:1:0: Attached scsi generic sg1 type 5

The other controllers (pata_ali and ahci) work fine.

I'll try to bisect in the weekend, unless someone can spot the bug right away
;)

Luca
--
The trouble with computers is that they do what you tell them,
not what you want.
D. Cohen


\
 
 \ /
  Last update: 2008-04-30 22:39    [W:0.029 / U:0.220 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site