Messages in this thread | | | Date | Mon, 28 Apr 2008 23:19:18 +0200 | From | Gabriel C <> | Subject | Re: [PATCH] x86_32: trim memory by updating e820 v3 |
| |
Gabriel C wrote: > Gabriel C wrote: >> Yinghai Lu wrote: >>> On Mon, Apr 28, 2008 at 7:24 AM, Gabriel C <nix.or.die@googlemail.com> wrote: >>>> Mika Fischer wrote: >>>> > Hi Ingo, >>>> > >>>> > I'm having the same problem. >>>> > >>>> > Ingo Molnar schrieb: >>>> >> excellent. So just to make sure: this box never had proper graphics >>>> >> under Linux (under no previous kernel), due to the way the BIOS has set >>>> >> up the MTRR's, right? >>>> > >>>> > Well, not quite. X still works fine, but since the video memory is >>>> > overlapped by two of the existing MTRRs, X cannot add a write-combining >>>> > range for the video memory. That makes X rather slow especially if you >>>> > use DRI for Compiz etc. >>>> >>>> Well you are lucky then :) >>>> >>>> Yeah X 'worked' but it worked as slow as with vesa video driver here. >>> [ 0.000000] rangeX: 0000000000000000 - 00000000d0000000 >>> [ 0.000000] Setting variable MTRR 0, base: 0MB, range: 2048MB, type WB >>> [ 0.000000] Setting variable MTRR 1, base: 2048MB, range: 1024MB, type WB >>> [ 0.000000] Setting variable MTRR 2, base: 3072MB, range: 256MB, type WB >>> [ 0.000000] range0: 00000000cf800000 - 00000000cf800000 >>> [ 0.000000] range: 00000000cf800000 - 00000000d0000000 >>> [ 0.000000] Setting variable MTRR 3, base: 3320MB, range: 8MB, type WB >>> [ 0.000000] range0: 0000000100000000 - 0000000120000000 >>> [ 0.000000] Setting variable MTRR 4, base: 4096MB, range: 512MB, type WB >>> [ 0.000000] range: 0000000120000000 - 0000000130000000 >>> [ 0.000000] Setting variable MTRR 5, base: 4608MB, range: 256MB, type WB >>> [ 0.000000] hole: 000000012c000000 - 0000000130000000 >>> [ 0.000000] Setting variable MTRR 6, base: 4800MB, range: 64MB, type UC >>> >>> so your X server need two entries for WB? >>> >>> can you send out /proc/mtrr with booting with disable_mtrr_cleanup? >> I can just not right now , cannot reboot the box yet. In about 1h or so , maybe less. > > Here the output with v3 which is disabled by default: > > --($:~)-- cat /proc/mtrr > reg00: base=0xd0000000 (3328MB), size= 256MB: uncachable, count=1 > reg01: base=0xe0000000 (3584MB), size= 512MB: uncachable, count=1 > reg02: base=0x00000000 ( 0MB), size=4096MB: write-back, count=1 > reg03: base=0x100000000 (4096MB), size= 512MB: write-back, count=1 > reg04: base=0x120000000 (4608MB), size= 128MB: write-back, count=1 > reg05: base=0x128000000 (4736MB), size= 64MB: write-back, count=1 > reg06: base=0xcf600000 (3318MB), size= 2MB: uncachable, count=1 > > dmesg is saying now : > > [ 22.764595] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining > > > My card settings in BIOS ( that was default ) are the following : > > DVMT Mode -> DVMT Mode ( possible setting DVMT Mode or Fixed Mode ) > DVMT / Memory -> 256MB ( possible settings 128/256 MB or Maximum DVMT ) > > Initiate Graphics Adapter -> PEG/PCI ( possible settings IGD , PCI/IGD , PCI/PEG , PEG/IGD ) > Internal Graphics Mode Select -> Enabled,8MB ( possible settings Enabled,8MB , Enabled,1MB maybe Disabled I forgot to look) > PEG Port -> Auto ( possible settings Auto , Disabled ) > PEG Port Force x1 -> Disabled ( possible settings Enabled , Disabled ) > > Of course these settings are only possible when the card is not disabled :) > > I'm gonna try v4 now and enable it. Please let me know if you need more infos.
Hmm v4 doesn't work anymore here ( I've tested with all possible settings in BIOS ). It takes 6 minutes to boot to :
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
after that the box hangs :/
| |