Messages in this thread | | | Date | Mon, 28 Apr 2008 16:29:35 +0200 | From | Gabor Gombas <> | Subject | Solid freezes with 2.6.25 |
| |
Hi,
I'm seeing solid freezes with 2.6.25. 2.6.24.x works fine, 2.6.25 never had an uptime longer than 4-6 hours so far. netconsole captured the following:
NMI Watchdog detected LOCKUP on CPU 1 CPU 1 Modules linked in: edd netconsole configfs i915 radeon drm rfcomm l2cap bluetooth xfrm_user xfrm4_tunnel tunnel4 ipcomp esp4 aead ah4 nfsd lockd nfs_acl auth_rpcgss sunrpc exportfs ipt_ULOG microcode ipt_REJECT nf_conntrack_ipv4 xt_state nf_conntrack xt_tcpudp ipt_LOG xt_limit iptable_filter ip_tables x_tables deflate zlib_deflate zlib_inflate ctr twofish twofish_common camellia serpent blowfish des_generic cbc aes_x86_64 aes_generic xcbc sha256_generic sha1_generic md5 crypto_null af_key fuse dm_crypt crypto_blkcipher dm_snapshot dm_mirror dm_mod coretemp w83627ehf hwmon_vid snd_hda_intel snd_pcm 8250_pnp snd_timer 8250 sg snd 8139too serial_core video r8169 snd_page_alloc usbhid i2c_i801 sr_mod iTCO_wdt floppy cdrom [last unloaded: netconsole] Pid: 2535, comm: postgres Not tainted 2.6.25 #11 RIP: 0010:[<ffffffff8021aa54>] [<ffffffff8021aa54>] hpet_rtc_interrupt+0x11a/0x2fd RSP: 0000:ffff81012fc77ec8 EFLAGS: 00200097 RAX: 0000000000000000 RBX: 0000000000200002 RCX: 0000000000000000 RDX: 000000000000c6c6 RSI: 0000000000200002 RDI: ffffffff80655ef8 RBP: 000000010011144c R08: ffffffffff5fc128 R09: 0000000000000000 R10: 0000000000200046 R11: 0000000000000000 R12: 00000000000000a6 R13: ffff81012fcf8800 R14: 0000000000000000 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff81012fc0f480(0063) knlGS:00000000f7f228e0 CS: 0010 DS: 002b ES: 002b CR0: 0000000080050033 CR2: 00000000f1559000 CR3: 0000000128cd8000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process postgres (pid: 2535, threadinfo ffff810128d18000, task ffff81012cbb6930) Stack: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 ffffffff00000000 0000000000000001 ffffffff806432c0 ffff81012fe25bc0 0000000000000000 0000000000000000 0000000000000008 ffffffff8025d6d0 Call Trace: <IRQ> [<ffffffff8025d6d0>] ? handle_IRQ_event+0x25/0x53 [<ffffffff8025ec3a>] ? handle_edge_irq+0xdd/0x11c [<ffffffff8020c0cc>] ? call_softirq+0x1c/0x28 [<ffffffff8020e26a>] ? do_IRQ+0xf1/0x15f [<ffffffff8020b451>] ? ret_from_intr+0x0/0xa <EOI>
Code: a0 28 00 bf 0a 00 00 00 48 89 c3 e8 73 6b ff ff 48 89 de 41 88 c4 48 c7 c7 f8 5e 65 80 e8 14 a1 28 00 45 84 e4 78 04 eb 12 f3 90 <48> 8b 05 25 1e 3e 00 48 29 e8 48 83 f8 04 76 ee 48 c7 c7 f8 5e ---[ end trace 8625c90c6582673f ]--- Kernel panic - not syncing: Aiee, killing interrupt handler!
Also, I have these messages in syslog:
Apr 28 13:13:31 boogie kernel: rtc: lost 157 interrupts Apr 28 13:13:32 boogie kernel: rtc: lost 37 interrupts Apr 28 13:25:37 boogie kernel: rtc: lost 60 interrupts
More info about the machine is attached. I've also seen similar hangs with 2.6.25-rc6 on an nforce4/Athlon64 box but I'm reluctant to re-test there because RAID rebuild takes too long.
Gabor
dmesg: ======
Initializing cgroup subsys cpuset Linux version 2.6.25 (gombasg@boogie) (gcc version 4.2.3 (Debian 4.2.3-3)) #11 SMP Mon Apr 28 10:41:10 CEST 2008 Command line: BOOT_IMAGE=l2625 ro root=900 video=intelfb:1280x1024-16@60 resume=/dev/sda2 selinux=1 audit=1 nmi_watchdog=2 single BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000cf2ac000 (usable) BIOS-e820: 00000000cf2ac000 - 00000000cf2ef000 (ACPI NVS) BIOS-e820: 00000000cf2ef000 - 00000000cf3c7000 (reserved) BIOS-e820: 00000000cf3c7000 - 00000000cf3d7000 (ACPI NVS) BIOS-e820: 00000000cf3d7000 - 00000000cf453000 (reserved) BIOS-e820: 00000000cf453000 - 00000000cf459000 (ACPI data) BIOS-e820: 00000000cf459000 - 00000000cf45a000 (ACPI NVS) BIOS-e820: 00000000cf45a000 - 00000000cf45c000 (ACPI data) BIOS-e820: 00000000cf45c000 - 00000000cf45d000 (ACPI NVS) BIOS-e820: 00000000cf45d000 - 00000000cf45e000 (reserved) BIOS-e820: 00000000cf45e000 - 00000000cf463000 (ACPI NVS) BIOS-e820: 00000000cf463000 - 00000000cf472000 (reserved) BIOS-e820: 00000000cf472000 - 00000000cf600000 (usable) BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved) BIOS-e820: 00000000ffa00000 - 00000000ffc00000 (reserved) BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 0000000130000000 (usable) Entering add_active_range(0, 0, 159) 0 entries of 256 used Entering add_active_range(0, 256, 848556) 1 entries of 256 used Entering add_active_range(0, 849010, 849408) 2 entries of 256 used Entering add_active_range(0, 1048576, 1245184) 3 entries of 256 used end_pfn_map = 1245184 DMI 2.4 present. ACPI: RSDP 000F03C0, 0024 (r2 INTEL) ACPI: XSDT CF45AF10, 0044 (r1 INTEL DG31PR 6222004 MSFT 10013) ACPI: FACP CF458D90, 00F4 (r4 INTEL DG31PR 6222004 MSFT 10013) ACPI: DSDT CF453010, 4D33 (r1 INTEL DG31PR 0 INTL 20051117) ACPI: FACS CF459F40, 0040 ACPI: APIC CF458F10, 006C (r2 INTEL DG31PR 6222004 MSFT 10013) ACPI: HPET CF461D10, 0038 (r1 INTEL ICH7HPET 6222004 AMI. 1) ACPI: MCFG CF461C10, 003C (r1 INTEL DG31PR 6222004 MSFT 97) Entering add_active_range(0, 0, 159) 0 entries of 256 used Entering add_active_range(0, 256, 848556) 1 entries of 256 used Entering add_active_range(0, 849010, 849408) 2 entries of 256 used Entering add_active_range(0, 1048576, 1245184) 3 entries of 256 used early res: 0 [0-fff] BIOS data page early res: 1 [6000-7fff] SMP_TRAMPOLINE early res: 2 [200000-6bc61b] TEXT DATA BSS early res: 3 [9fc00-a0bff] EBDA early res: 4 [8000-dfff] PGTABLE [ffffe20000000000-ffffe200001fffff] PMD ->ffff810001200000 on node 0 [ffffe20000200000-ffffe200003fffff] PMD ->ffff810001600000 on node 0 [ffffe20000400000-ffffe200005fffff] PMD ->ffff810001a00000 on node 0 [ffffe20000600000-ffffe200007fffff] PMD ->ffff810001e00000 on node 0 [ffffe20000800000-ffffe200009fffff] PMD ->ffff810002200000 on node 0 [ffffe20000a00000-ffffe20000bfffff] PMD ->ffff810002600000 on node 0 [ffffe20000c00000-ffffe20000dfffff] PMD ->ffff810002a00000 on node 0 [ffffe20000e00000-ffffe20000ffffff] PMD ->ffff810002e00000 on node 0 [ffffe20001000000-ffffe200011fffff] PMD ->ffff810003200000 on node 0 [ffffe20001200000-ffffe200013fffff] PMD ->ffff810003600000 on node 0 [ffffe20001400000-ffffe200015fffff] PMD ->ffff810003a00000 on node 0 [ffffe20001600000-ffffe200017fffff] PMD ->ffff810003e00000 on node 0 [ffffe20001800000-ffffe200019fffff] PMD ->ffff810004200000 on node 0 [ffffe20001a00000-ffffe20001bfffff] PMD ->ffff810004600000 on node 0 [ffffe20001c00000-ffffe20001dfffff] PMD ->ffff810004a00000 on node 0 [ffffe20001e00000-ffffe20001ffffff] PMD ->ffff810004e00000 on node 0 [ffffe20002000000-ffffe200021fffff] PMD ->ffff810005200000 on node 0 [ffffe20002200000-ffffe200023fffff] PMD ->ffff810005600000 on node 0 [ffffe20002400000-ffffe200025fffff] PMD ->ffff810005a00000 on node 0 [ffffe20002600000-ffffe200027fffff] PMD ->ffff810005e00000 on node 0 [ffffe20002800000-ffffe200029fffff] PMD ->ffff810006200000 on node 0 [ffffe20002a00000-ffffe20002bfffff] PMD ->ffff810006600000 on node 0 [ffffe20002c00000-ffffe20002dfffff] PMD ->ffff810006a00000 on node 0 [ffffe20002e00000-ffffe20002ffffff] PMD ->ffff810006e00000 on node 0 [ffffe20003000000-ffffe200031fffff] PMD ->ffff810007200000 on node 0 [ffffe20003200000-ffffe200033fffff] PMD ->ffff810007600000 on node 0 [ffffe20003400000-ffffe200035fffff] PMD ->ffff810007a00000 on node 0 [ffffe20003600000-ffffe200037fffff] PMD ->ffff810007e00000 on node 0 [ffffe20003800000-ffffe200039fffff] PMD ->ffff810008200000 on node 0 [ffffe20003a00000-ffffe20003bfffff] PMD ->ffff810008600000 on node 0 [ffffe20003c00000-ffffe20003dfffff] PMD ->ffff810008a00000 on node 0 [ffffe20003e00000-ffffe20003ffffff] PMD ->ffff810008e00000 on node 0 [ffffe20004000000-ffffe200041fffff] PMD ->ffff810009200000 on node 0 [ffffe20004200000-ffffe200043fffff] PMD ->ffff810009600000 on node 0 [ffffe20004400000-ffffe200045fffff] PMD ->ffff810009a00000 on node 0 [ffffe20004600000-ffffe200047fffff] PMD ->ffff810009e00000 on node 0 [ffffe20004800000-ffffe200049fffff] PMD ->ffff81000a200000 on node 0 [ffffe20004a00000-ffffe20004bfffff] PMD ->ffff81000a600000 on node 0 Zone PFN ranges: DMA 0 -> 4096 DMA32 4096 -> 1048576 Normal 1048576 -> 1245184 Movable zone start PFN for each node early_node_map[4] active PFN ranges 0: 0 -> 159 0: 256 -> 848556 0: 849010 -> 849408 0: 1048576 -> 1245184 On node 0 totalpages: 1045465 DMA zone: 64 pages used for memmap DMA zone: 1224 pages reserved DMA zone: 2711 pages, LIFO batch:0 DMA32 zone: 16320 pages used for memmap DMA32 zone: 828538 pages, LIFO batch:31 Normal zone: 3072 pages used for memmap Normal zone: 193536 pages, LIFO batch:31 Movable zone: 0 pages used for memmap ACPI: PM-Timer IO Port: 0x408 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 (Bootup-CPU) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) Processor #1 ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] disabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] disabled) ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 0, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Setting APIC routing to flat ACPI: HPET id: 0x8086a201 base: 0xfed00000 Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at d0000000 (gap: cf600000:2f71c000) SMP: Allowing 4 CPUs, 2 hotplug CPUs PERCPU: Allocating 34112 bytes of per cpu data Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1024785 Kernel command line: BOOT_IMAGE=l2625 ro root=900 video=intelfb:1280x1024-16@60 resume=/dev/sda2 selinux=1 audit=1 nmi_watchdog=2 single audit: enabled (after initialization) Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) Extended CMOS year: 2000 TSC calibrated against PM_TIMER time.c: Detected 2199.955 MHz processor. Console: colour VGA+ 80x50 console [tty0] enabled Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Checking aperture... PCI-DMA: Using software bounce buffering for IO (SWIOTLB) Placing software IO TLB between 0xae21000 - 0xee21000 Memory: 4025872k/4980736k available (2717k kernel code, 155356k reserved, 1280k data, 248k init) CPA: page pool initialized 1 of 1 pages preallocated SLUB: Genslabs=12, HWalign=64, Order=0-1, MinObjects=4, CPUs=4, Nodes=1 hpet clockevent registered Calibrating delay using timer specific routine.. 4403.20 BogoMIPS (lpj=8806400) Security Framework initialized SELinux: Initializing. SELinux: Starting in permissive mode selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 256 Initializing cgroup subsys ns Initializing cgroup subsys cpuacct Initializing cgroup subsys memory CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 1024K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU0: Thermal monitoring enabled (TM2) using mwait in idle threads. ACPI: Core revision 20070126 Using local APIC timer interrupts. APIC timer calibration result 12499744 Detected 12.499 MHz APIC timer. Booting processor 1/2 APIC 0x1 Initializing CPU#1 Calibrating delay using timer specific routine.. 4399.88 BogoMIPS (lpj=8799778) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 1024K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU1: Thermal monitoring enabled (TM2) Intel(R) Pentium(R) Dual CPU E2200 @ 2.20GHz stepping 0d checking TSC synchronization [CPU#0 -> CPU#1]: passed. Brought up 2 CPUs Testing NMI watchdog ... OK. CPU0 attaching sched-domain: domain 0: span 3 groups: 1 2 CPU1 attaching sched-domain: domain 0: span 3 groups: 2 1 net_namespace: 1016 bytes xor: automatically using best checksumming function: generic_sse generic_sse: 8072.000 MB/sec xor: using function: generic_sse (8072.000 MB/sec) NET: Registered protocol family 16 No dock devices found. ACPI: bus type pci registered PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved PCI: Not using MMCONFIG. PCI: Using configuration type 1 ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S5) ACPI: Using IOAPIC for interrupt routing ACPI: BIOS _OSI(Linux) query ignored ACPI: DMI System Vendor: ACPI: DMI Product Name: ACPI: DMI Product Version: ACPI: DMI Board Name: DG31PR ACPI: DMI BIOS Vendor: Intel Corp. ACPI: DMI BIOS Date: 02/27/2008 ACPI: Please send DMI info above to linux-acpi@vger.kernel.org ACPI: If "acpi_osi=Linux" works better, please notify linux-acpi@vger.kernel.org ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0 ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0 ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 13 devices ACPI: ACPI bus type pnp unregistered SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default PCI-GART: No AMD northbridge found. hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 hpet0: 3 64-bit timers, 14318180 Hz ACPI: RTC can wake from S4 system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved system 00:01: iomem range 0xe0000000-0xe3ffffff has been reserved system 00:02: ioport range 0x400-0x47f has been reserved system 00:02: ioport range 0x1180-0x119f has been reserved system 00:02: ioport range 0x500-0x53f has been reserved system 00:02: iomem range 0xfec00000-0xfecfffff has been reserved system 00:02: iomem range 0xfee00000-0xfee0ffff could not be reserved system 00:02: iomem range 0xfed1c000-0xfed1ffff could not be reserved system 00:02: iomem range 0xffb00000-0xffcfffff could not be reserved system 00:02: iomem range 0xfc800000-0xfc800fff has been reserved system 00:02: iomem range 0xfed20000-0xfed7ffff has been reserved system 00:02: iomem range 0xffe00000-0xffffffff could not be reserved system 00:03: ioport range 0x290-0x29f has been reserved system 00:0a: ioport range 0x4d0-0x4d1 has been reserved PCI: Bridge: 0000:00:01.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.1 IO window: e000-efff MEM window: 0xff800000-0xff8fffff PREFETCH window: disabled. PCI: Bridge: 0000:00:1e.0 IO window: d000-dfff MEM window: 0xff700000-0xff7fffff PREFETCH window: disabled. ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:01.0 to 64 ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1c.0 to 64 ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1c.1 to 64 PCI: Setting latency timer of device 0000:00:1e.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered audit: initializing netlink socket (enabled) type=2000 audit(1209386619.444:1): initialized VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) SELinux: Registering netfilter hooks async_tx: api initialized (sync-only) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci 0000:00:02.0: Boot video device PCI: Setting latency timer of device 0000:00:01.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:01.0:pcie00] PCI: Setting latency timer of device 0000:00:1c.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.0:pcie00] Allocate Port Service[0000:00:1c.0:pcie02] PCI: Setting latency timer of device 0000:00:1c.1 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.1:pcie00] Allocate Port Service[0000:00:1c.1:pcie02] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 ACPI: Power Button (FF) [PWRF] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1 ACPI: Sleep Button (CM) [SLPB] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2 ACPI: Power Button (CM) [PWRB] ACPI: SSDT CF45EC10, 02CC (r1 AMI IST 1 MSFT 3000001) ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) ACPI: ACPI0007:00 is registered as cooling_device0 ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) ACPI: ACPI0007:01 is registered as cooling_device1 hpet_resources: 0xfed00000 is busy Linux agpgart interface v0.103 agpgart: Detected an Intel G33 Chipset. agpgart: Detected 7164K stolen memory. Switched to high resolution mode on CPU 1 Switched to high resolution mode on CPU 0 agpgart: AGP aperture is 256M @ 0xd0000000 Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds). Hangcheck: Using get_cycles(). intelfb: Framebuffer driver for Intel(R) 830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM chipsets intelfb: Version 0.9.4 Driver 'sd' needs updating - please use bus_type methods ata_piix 0000:00:1f.1: version 2.12 ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1f.1 to 64 scsi0 : ata_piix scsi1 : ata_piix ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf0f0 irq 14 ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf0f8 irq 15 ata1.00: ATAPI: ASUS DRW-1814BL, 1.13, max UDMA/66 ata1.00: configured for UDMA/66 ata2: port disabled. ignoring. scsi 0:0:0:0: CD-ROM ASUS DRW-1814BL 1.13 PQ: 0 ANSI: 5 ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 17 ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] PCI: Setting latency timer of device 0000:00:1f.2 to 64 scsi2 : ata_piix scsi3 : ata_piix ata3: SATA max UDMA/133 cmd 0xf0e0 ctl 0xf0d0 bmdma 0xf0a0 irq 17 ata4: SATA max UDMA/133 cmd 0xf0c0 ctl 0xf0b0 bmdma 0xf0a8 irq 17 ata3.00: ATA-7: Maxtor 7L250S0, BACE1G10, max UDMA/133 ata3.00: 488281250 sectors, multi 16: LBA48 NCQ (depth 0/32) ata3.00: configured for UDMA/133 ata4.00: ATA-7: Maxtor 7L250S0, BACE1G10, max UDMA/133 ata4.00: 488281250 sectors, multi 16: LBA48 NCQ (depth 0/32) ata4.00: configured for UDMA/133 scsi 2:0:0:0: Direct-Access ATA Maxtor 7L250S0 BACE PQ: 0 ANSI: 5 sd 2:0:0:0: [sda] 488281250 512-byte hardware sectors (250000 MB) sd 2:0:0:0: [sda] Write Protect is off sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 2:0:0:0: [sda] 488281250 512-byte hardware sectors (250000 MB) sd 2:0:0:0: [sda] Write Protect is off sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 < sda5 > sd 2:0:0:0: [sda] Attached SCSI disk scsi 3:0:0:0: Direct-Access ATA Maxtor 7L250S0 BACE PQ: 0 ANSI: 5 sd 3:0:0:0: [sdb] 488281250 512-byte hardware sectors (250000 MB) sd 3:0:0:0: [sdb] Write Protect is off sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 3:0:0:0: [sdb] 488281250 512-byte hardware sectors (250000 MB) sd 3:0:0:0: [sdb] Write Protect is off sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdb: sdb1 sdb2 sdb3 < sdb5 > sd 3:0:0:0: [sdb] Attached SCSI disk ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 32 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: irq 23, io mem 0xff984000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000f080 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000f060 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000f040 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1d.3 to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000f020 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice usb 1-2: new high speed USB device using ehci_hcd and address 3 rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one year, y3k i2c /dev entries driver md: raid0 personality registered for level 0 md: raid1 personality registered for level 1 md: raid10 personality registered for level 10 input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 raid6: int64x1 2069 MB/s usb 1-2: configuration #1 chosen from 1 choice hub 1-2:1.0: USB hub found hub 1-2:1.0: 4 ports detected raid6: int64x2 2606 MB/s raid6: int64x4 2493 MB/s raid6: int64x8 2015 MB/s raid6: sse2x1 3509 MB/s raid6: sse2x2 3917 MB/s usb 2-1: new low speed USB device using uhci_hcd and address 2 raid6: sse2x4 6646 MB/s raid6: using algorithm sse2x4 (6646 MB/s) md: raid6 personality registered for level 6 md: raid5 personality registered for level 5 md: raid4 personality registered for level 4 EDAC MC: Ver: 2.1.0 Apr 25 2008 cpuidle: using governor ladder cpuidle: using governor menu TCP cubic registered NET: Registered protocol family 1 Marking TSC unstable due to TSC halts in idle NET: Registered protocol family 10 lo: Disabled Privacy Extensions NET: Registered protocol family 17 registered taskstats version 1 rtc_cmos 00:08: setting system clock to 2008-04-28 12:43:41 UTC (1209386621) md: Autodetecting RAID arrays. md: invalid raid superblock magic on sda5 md: sda5 does not have a valid v0.90 superblock, not importing! usb 2-1: configuration #1 chosen from 1 choice md: invalid raid superblock magic on sdb5 md: sdb5 does not have a valid v0.90 superblock, not importing! md: Scanned 4 and added 2 devices. md: autorun ... md: considering sdb1 ... md: adding sdb1 ... md: adding sda1 ... md: created md0 md: bind<sda1> md: bind<sdb1> md: running: <sdb1><sda1> raid1: raid set md0 active with 2 out of 2 mirrors md: ... autorun DONE. kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 248k freed SELinux:8192 avtab hash slots allocated. Num of rules:71699 SELinux:8192 avtab hash slots allocated. Num of rules:71699 security: 7 users, 7 roles, 1457 types, 61 bools security: 69 classes, 71699 rules SELinux: Completing initialization. SELinux: Setting up existing superblocks. SELinux: initialized (dev md0, type ext3), uses xattr SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs SELinux: initialized (dev devpts, type devpts), uses transition SIDs SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts SELinux: initialized (dev pipefs, type pipefs), uses task SIDs SELinux: initialized (dev sockfs, type sockfs), uses task SIDs SELinux: initialized (dev proc, type proc), uses genfs_contexts SELinux: initialized (dev bdev, type bdev), uses genfs_contexts SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts SELinux: policy loaded with handle_unknown=deny SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 17 r8169 Gigabit Ethernet driver 2.2LK-NAPI loaded ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:03:00.0 to 64 eth0: RTL8168b/8111b at 0xffffc20000020000, 00:1c:c0:34:06:c9, XID 38500000 IRQ 380 udev: renamed network interface eth0 to mobo ACPI Exception (video-1613): AE_NOT_FOUND, Evaluating _DOD [20070126] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:17/input/input4 FDC 0 is a post-1991 82077 iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007) iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0x0460) iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) Driver 'sr' needs updating - please use bus_type methods sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 0:0:0:0: Attached scsi CD-ROM sr0 8139too Fast Ethernet driver 0.9.28 ACPI: PCI Interrupt 0000:04:06.0[A] -> GSI 21 (level, low) -> IRQ 21 eth0: RealTek RTL8139 at 0xffffc20000022000, 00:c1:28:01:d5:f6, IRQ 21 eth0: Identified 8139 chip type 'RTL-8139C' sr 0:0:0:0: Attached scsi generic sg0 type 5 sd 2:0:0:0: Attached scsi generic sg1 type 0 sd 3:0:0:0: Attached scsi generic sg2 type 0 ACPI: Video Device [GFX0] (multi-head: no rom: yes post: no) udev: renamed network interface eth0 to rtl input: Logitech USB RECEIVER as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input5 input: USB HID v1.11 Mouse [Logitech USB RECEIVER] on usb-0000:00:1d.0-1 usbcore: registered new interface driver usbhid drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1b.0 to 64 hda_codec: Unknown model for ALC883, trying auto-probe from BIOS... SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs printk: 21 messages suppressed. Adding 2008116k swap on /dev/sda2. Priority:-1 extents:1 across:2008116k Adding 2008116k swap on /dev/sdb2. Priority:-2 extents:1 across:2008116k EXT3 FS on md0, internal journal w83627ehf: Found W83627DHG chip at 0x290 coretemp coretemp.0: Using relative temperature scale! coretemp coretemp.1: Using relative temperature scale! device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com md: md3 stopped. md: bind<sda5> md: bind<sdb5> md: md3: raid array is not clean -- starting background reconstruction raid1: raid set md3 active with 2 out of 2 mirrors md: resync of RAID array md3 md: minimum _guaranteed_ speed: 1000 KB/sec/disk. md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for resync. md: using 128k window, over a total of 240235840 blocks. md: resuming resync of md3 from checkpoint. fuse init (API version 7.9) SELinux: initialized (dev fusectl, type fusectl), not configured for labeling kjournald starting. Commit interval 5 seconds EXT3 FS on dm-0, internal journal EXT3-fs: mounted filesystem with ordered data mode. SELinux: initialized (dev dm-0, type ext3), uses xattr kjournald starting. Commit interval 5 seconds EXT3 FS on dm-1, internal journal EXT3-fs: mounted filesystem with ordered data mode. SELinux: initialized (dev dm-1, type ext3), uses xattr kjournald starting. Commit interval 5 seconds EXT3 FS on dm-2, internal journal EXT3-fs: mounted filesystem with ordered data mode. SELinux: initialized (dev dm-2, type ext3), uses xattr kjournald starting. Commit interval 5 seconds EXT3 FS on dm-3, internal journal EXT3-fs: mounted filesystem with ordered data mode. SELinux: initialized (dev dm-3, type ext3), uses xattr printk: 129 messages suppressed. NET: Registered protocol family 15 printk: 15 messages suppressed. ip_tables: (C) 2000-2006 Netfilter Core Team nf_conntrack version 0.5.0 (16384 buckets, 65536 max) r8169: mobo: link up r8169: mobo: link up rtl: link down ADDRCONF(NETDEV_UP): rtl: link is not ready printk: 111 messages suppressed. ttyS1: LSR safety check engaged! ttyS1: LSR safety check engaged!
lspci -vvvnn: =============
00:00.0 Host bridge [0600]: Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller [8086:29c0] (rev 02) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: [e0] Vendor Specific Information <?> Kernel driver in use: agpgart-intel
00:01.0 PCI bridge [0604]: Intel Corporation 82G33/G31/P35/P31 Express PCI Express Root Port [8086:29c1] (rev 02) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 0000f000-00000fff Memory behind bridge: fff00000-000fffff Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [88] Subsystem: Intel Corporation Device [8086:0000] Capabilities: [80] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [90] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+ Address: fee0300c Data: 4159 Capabilities: [a0] Express (v1) Root Port (Slot+), MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag- RBE+ FLReset- DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+ RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #2, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0 <1us, L1 <8us ClockPM- Suprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise- Slot # 0, PowerLimit 0.000000; Interlock- NoCompl+ SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- Control: AttnInd Off, PwrInd On, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock- Changed: MRL- PresDet- LinkState- RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- Kernel driver in use: pcieport-driver
00:02.0 VGA compatible controller [0300]: Intel Corporation 82G33/G31 Express Integrated Graphics Controller [8086:29c2] (rev 02) Subsystem: Intel Corporation 82G33/G31 Express Integrated Graphics Controller [8086:29c2] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 11 Region 0: Memory at ff900000 (32-bit, non-prefetchable) [size=512K] Region 1: I/O ports at f140 [size=8] Region 2: Memory at d0000000 (32-bit, prefetchable) [size=256M] Region 3: Memory at ff600000 (32-bit, non-prefetchable) [size=1M] Capabilities: [90] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable- Address: 00000000 Data: 0000 Capabilities: [d0] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:1b.0 Audio device [0403]: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller [8086:27d8] (rev 01) Subsystem: Intel Corporation Device [8086:d608] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at ff980000 (64-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable- Address: 0000000000000000 Data: 0000 Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag- RBE- FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0 <64ns, L1 <1us ClockPM- Suprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt- Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel
00:1c.0 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 [8086:27d0] (rev 01) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 0000f000-00000fff Memory behind bridge: fff00000-000fffff Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited ExtTag- RBE- FLReset- DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+ RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <4us ClockPM- Suprise- LLActRep+ BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surpise+ Slot # 1, PowerLimit 10.000000; Interlock- NoCompl- SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock- Changed: MRL- PresDet- LinkState- RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+ Address: fee0300c Data: 4161 Capabilities: [90] Subsystem: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 [8086:27d0] Capabilities: [a0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: pcieport-driver
00:1c.1 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 [8086:27d2] (rev 01) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 I/O behind bridge: 0000e000-0000efff Memory behind bridge: ff800000-ff8fffff Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited ExtTag- RBE- FLReset- DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+ RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- LnkCap: Port #2, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <256ns, L1 <4us ClockPM- Suprise- LLActRep+ BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surpise+ Slot # 2, PowerLimit 10.000000; Interlock- NoCompl- SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock- Changed: MRL- PresDet+ LinkState+ RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+ Address: fee0300c Data: 4169 Capabilities: [90] Subsystem: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 [8086:27d2] Capabilities: [a0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: pcieport-driver
00:1d.0 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 [8086:27c8] (rev 01) Subsystem: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 [8086:27c8] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 4: I/O ports at f080 [size=32] Kernel driver in use: uhci_hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 [8086:27c9] (rev 01) Subsystem: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 [8086:27c9] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 19 Region 4: I/O ports at f060 [size=32] Kernel driver in use: uhci_hcd
00:1d.2 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 [8086:27ca] (rev 01) Subsystem: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 [8086:27ca] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 4: I/O ports at f040 [size=32] Kernel driver in use: uhci_hcd
00:1d.3 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 [8086:27cb] (rev 01) Subsystem: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 [8086:27cb] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin D routed to IRQ 16 Region 4: I/O ports at f020 [size=32] Kernel driver in use: uhci_hcd
00:1d.7 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller [8086:27cc] (rev 01) (prog-if 20) Subsystem: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller [8086:27cc] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 0: Memory at ff984000 (32-bit, non-prefetchable) [size=1K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [58] Debug port: BAR=1 offset=00a0 Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev e1) (prog-if 01) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=04, subordinate=04, sec-latency=32 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: ff700000-ff7fffff Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [50] Subsystem: Gammagraphx, Inc. Device [0000:0000]
00:1f.0 ISA bridge [0601]: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge [8086:27b8] (rev 01) Subsystem: Intel Corporation Device [8086:544e] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: [e0] Vendor Specific Information <?> Kernel modules: iTCO_wdt
00:1f.1 IDE interface [0101]: Intel Corporation 82801G (ICH7 Family) IDE Controller [8086:27df] (rev 01) (prog-if 8a [Master SecP PriP]) Subsystem: Intel Corporation 82801G (ICH7 Family) IDE Controller [8086:27df] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: I/O ports at 01f0 [size=8] Region 1: I/O ports at 03f4 [size=1] Region 2: I/O ports at 0170 [size=8] Region 3: I/O ports at 0374 [size=1] Region 4: I/O ports at f0f0 [size=16] Kernel driver in use: ata_piix
00:1f.2 IDE interface [0101]: Intel Corporation 82801GB/GR/GH (ICH7 Family) SATA IDE Controller [8086:27c0] (rev 01) (prog-if 8f [Master SecP SecO PriP PriO]) Subsystem: Intel Corporation 82801GB/GR/GH (ICH7 Family) SATA IDE Controller [8086:27c0] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 17 Region 0: I/O ports at f0e0 [size=8] Region 1: I/O ports at f0d0 [size=4] Region 2: I/O ports at f0c0 [size=8] Region 3: I/O ports at f0b0 [size=4] Region 4: I/O ports at f0a0 [size=16] Capabilities: [70] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: ata_piix
00:1f.3 SMBus [0c05]: Intel Corporation 82801G (ICH7 Family) SMBus Controller [8086:27da] (rev 01) Subsystem: Intel Corporation Device [8086:d608] Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin B routed to IRQ 17 Region 4: I/O ports at f000 [size=32] Kernel driver in use: i801_smbus Kernel modules: i2c-i801
03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 01) Subsystem: Intel Corporation Device [8086:d608] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 380 Region 0: I/O ports at e000 [size=256] Region 2: Memory at ff820000 (64-bit, non-prefetchable) [size=4K] Expansion ROM at ff800000 [disabled] [size=128K] Capabilities: [40] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0-,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [48] Vital Product Data <?> Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable+ Address: 00000000fee0300c Data: 4189 Capabilities: [60] Express (v1) Endpoint, MSI 00 DevCap: MaxPayload 1024 bytes, PhantFunc 0, Latency L0s <128ns, L1 unlimited ExtTag+ AttnBtn+ AttnInd+ PwrInd+ RBE- FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 4096 bytes DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr+ TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s, Latency L0 unlimited, L1 unlimited ClockPM- Suprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- Capabilities: [84] Vendor Specific Information <?> Kernel driver in use: r8169 Kernel modules: r8169
04:06.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ [10ec:8139] (rev 10) Subsystem: Compex Device [11f6:8139] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (8000ns min, 16000ns max) Interrupt: pin A routed to IRQ 21 Region 0: I/O ports at d000 [size=256] Region 1: Memory at ff700000 (32-bit, non-prefetchable) [size=256] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0-,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: 8139too Kernel modules: 8139too
-- --------------------------------------------------------- MTA SZTAKI Computer and Automation Research Institute Hungarian Academy of Sciences ---------------------------------------------------------
| |