lkml.org 
[lkml]   [2008]   [Apr]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [2.6 patch] ARM: always select HAVE_IDE
Date
On Thursday 17 April 2008, Adrian Bunk wrote:
> On Wed, Apr 16, 2008 at 01:26:10AM +0200, Bartlomiej Zolnierkiewicz wrote:
> > On Wednesday 16 April 2008, Russell King wrote:
> > > On Wed, Apr 16, 2008 at 01:10:02AM +0300, Adrian Bunk wrote:
> > > > On Tue, Apr 15, 2008 at 11:03:45PM +0100, Russell King wrote:
> > > > > On Wed, Apr 16, 2008 at 12:52:23AM +0300, Adrian Bunk wrote:
> > > > >...
> > > > > So this is a only impacting ARM wrt. PCMCIA, and given that ARM supplies
> > > > > an asm/ide.h, it's _entirely_ reasonable that if a platform has PCMCIA
> > > > > then it supports IDE.
> > > > >
> > > > > > We could simply always select HAVE_IDE on arm instead of manually
> > > > > > setting which platforms could possibly get IDE support (e.g. are there
> > > > > > any boards with PCI slots for which HAVE_IDE is currently not
> > > > > > selected?).
> > > > >
> > > > > You could, if there was a demand for it. As no one has added that,
> > > > > I conclude that its less common for people to stick an IDE controller
> > > > > into a PCI backplane.
> > > >
> > > > People can always enable code for stuff they don't use.
> > > >
> > > > But instead of having 14 ARM platforms plus PCMCIA (which is offered
> > > > unconditionally on all ARM platforms...) select HAVE_IDE it's simpler
> > > > to select it once for all ARM platforms.
> >
> > Please send me a patch doing this, it should be safe for current IDE tree.
> >
> > > That would seem logical, but Bart objects to that idea.
> >
> > I don't remember the background but I think it was needed because of badly
> > perplexed ide_init_hwif_ports() and friends in <asm/ide.h> vs <linux/ide.h>
> > (almost all this stuff is gone in IDE tree for 2.6.26)...
> >
> > Ok, I found the patch:
> >
> > http://git.kernel.org/?p=linux/kernel/git/tglx/history.git;a=commitdiff;h=4b3b8ee5db374b76608537e061f2efd90e21179d
> >
> > [ tglx's history tree since it is from May 2004. ]
> >
> > > However, consider that we're gradually transitioning over to being
> > > exclusively libata only.
> > >
> > > > > In fact, there are only three classes of ARM platforms which have PCI
> > > > > selected but not HAVE_IDE - IOP13xx, IXP2000, and Orion. I suspect
> > > > > the only reason they don't select it because they now use the ATA code
> > > > > rather than the old IDE code - that's certainly true of Orion.
> > > >
> > > > The libata options are offered unconditionally on all platforms...
> > >
> > > It wasn't *my* choice to restrict IDE on ARM. See Bart for that
> > > decision.
> >
> > It could be that I did the poor job of explaining things back then
> > but I also didn't like the fact that I needed to restrict the IDE
> > choice on ARM - the change in question was _necessary_ to start
> > converting IDE drivers to become real, independent, modular host
> > drivers and as a preparation for adding proper warm-plug support.
>
> Any objections against the patch below?
>
> > Thanks,
> > Bart
>
> cu
> Adrian
>
>
> <-- snip -->
>
>
> It's plain wrong for PCMCIA to select HAVE_IDE that implies e.g. the
> availability of an asm/ide.h
>
> It turns out this was done for ARM, and we can simply always select
> HAVE_IDE on ARM instead of manually tracking which platforms might
> possible have an IDE controller directly or indirectly.
>
> Signed-off-by: Adrian Bunk <bunk@kernel.org>

thanks, applied

[ Russell: I plan to put it into next IDE update, please ping me if you
prefer to merge it through ARM tree ]


\
 
 \ /
  Last update: 2008-04-27 21:57    [W:0.084 / U:2.172 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site