Messages in this thread | | | Date | Mon, 21 Apr 2008 15:47:04 -0700 | From | Mike Travis <> | Subject | Re: PATCH [1/1]: x86:fix i686 panic with the early_per_cpu macro |
| |
Mike Travis wrote: > Ingo Molnar wrote: >> * Mike Travis <travis@sgi.com> wrote: >> >>> ... Do you >>> want me to consolidate the outstanding patches and send them again all >>> together? ... >> resending would be appreciated, if it's not hard. I had to disable the >> early-pointers cleanup patch because of the breakage it caused. >> >> Ingo >
The build tests have passed. The kernel in all it's variations runs on my intel box fine but fails on the amd box with boot disk errors. Here's what it should say:
scsi0 : sata_nv ata1: SATA max UDMA/133 cmd 0x34d0 ctl 0x34c4 bmdma 0x3490 irq 19 ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: ATA-7: WDC WD2500YD-01NVB1, 10.02E01, max UDMA/133 ata1.00: 490234752 sectors, multi 16: LBA48 NCQ (depth 0/1) ata1.00: configured for UDMA/133 scsi 0:0:0:0: Direct-Access ATA WDC WD2500YD-01N 10.0 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 490234752 512-byte hardware sectors (251000 MB) ... sda: sda1 sda2 < sda5 sda6 sda7 sda8 > sd 0:0:0:0: [sda] Attached SCSI disk sd 0:0:0:0: Attached scsi generic sg0 type 0 ... EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly.
But instead it fails:
scsi0 : sata_nv ata1: SATA max UDMA/133 cmd 0x34d0 ctl 0x34c4 bmdma 0x3490 irq 19 ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ... Root-NFS: No NFS server available, giving up. VFS: Unable to mount root fs via NFS, trying floppy. VFS: Insert root floppy and press ENTER
This is linux-2.6 + sched-latest with or without my patches installed and different configurations including the simplest nosmp. The root FS is ok as I can boot an older kernel fine. I've checked to insure the file system is configured (ext2 in this case). [Obviously the sata driver is config'd.]
Any ideas?
Thanks, Mike
| |