lkml.org 
[lkml]   [2008]   [Apr]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 4/5] IB/ehca: Make some module parameters bool, update descriptions
Date
Signed-off-by: Joachim Fenkes <fenkes@de.ibm.com>
---
drivers/infiniband/hw/ehca/ehca_main.c | 37 +++++++++++++++----------------
1 files changed, 18 insertions(+), 19 deletions(-)

diff --git a/drivers/infiniband/hw/ehca/ehca_main.c b/drivers/infiniband/hw/ehca/ehca_main.c
index ab02ac8..45fe35a 100644
--- a/drivers/infiniband/hw/ehca/ehca_main.c
+++ b/drivers/infiniband/hw/ehca/ehca_main.c
@@ -69,41 +69,40 @@ int ehca_static_rate = -1;
int ehca_scaling_code = 0;
int ehca_lock_hcalls = -1;

-module_param_named(open_aqp1, ehca_open_aqp1, int, S_IRUGO);
-module_param_named(debug_level, ehca_debug_level, int, S_IRUGO);
-module_param_named(hw_level, ehca_hw_level, int, S_IRUGO);
-module_param_named(nr_ports, ehca_nr_ports, int, S_IRUGO);
-module_param_named(use_hp_mr, ehca_use_hp_mr, int, S_IRUGO);
-module_param_named(port_act_time, ehca_port_act_time, int, S_IRUGO);
-module_param_named(poll_all_eqs, ehca_poll_all_eqs, int, S_IRUGO);
-module_param_named(static_rate, ehca_static_rate, int, S_IRUGO);
-module_param_named(scaling_code, ehca_scaling_code, int, S_IRUGO);
+module_param_named(open_aqp1, ehca_open_aqp1, bool, S_IRUGO);
+module_param_named(debug_level, ehca_debug_level, int, S_IRUGO);
+module_param_named(hw_level, ehca_hw_level, int, S_IRUGO);
+module_param_named(nr_ports, ehca_nr_ports, int, S_IRUGO);
+module_param_named(use_hp_mr, ehca_use_hp_mr, bool, S_IRUGO);
+module_param_named(port_act_time, ehca_port_act_time, int, S_IRUGO);
+module_param_named(poll_all_eqs, ehca_poll_all_eqs, bool, S_IRUGO);
+module_param_named(static_rate, ehca_static_rate, int, S_IRUGO);
+module_param_named(scaling_code, ehca_scaling_code, bool, S_IRUGO);
module_param_named(lock_hcalls, ehca_lock_hcalls, bool, S_IRUGO);

MODULE_PARM_DESC(open_aqp1,
- "AQP1 on startup (0: no (default), 1: yes)");
+ "Open AQP1 on startup (default: no)");
MODULE_PARM_DESC(debug_level,
"Amount of debug output (0: none (default), 1: traces, "
"2: some dumps, 3: lots)");
MODULE_PARM_DESC(hw_level,
- "hardware level"
- " (0: autosensing (default), 1: v. 0.20, 2: v. 0.21)");
+ "Hardware level (0: autosensing (default), "
+ "0x10..0x14: eHCA, 0x20..0x23: eHCA2)");
MODULE_PARM_DESC(nr_ports,
"number of connected ports (-1: autodetect, 1: port one only, "
"2: two ports (default)");
MODULE_PARM_DESC(use_hp_mr,
- "high performance MRs (0: no (default), 1: yes)");
+ "Use high performance MRs (default: no)");
MODULE_PARM_DESC(port_act_time,
- "time to wait for port activation (default: 30 sec)");
+ "Time to wait for port activation (default: 30 sec)");
MODULE_PARM_DESC(poll_all_eqs,
- "polls all event queues periodically"
- " (0: no, 1: yes (default))");
+ "Poll all event queues periodically (default: yes)");
MODULE_PARM_DESC(static_rate,
- "set permanent static rate (default: disabled)");
+ "Set permanent static rate (default: no static rate)");
MODULE_PARM_DESC(scaling_code,
- "set scaling code (0: disabled/default, 1: enabled)");
+ "Enable scaling code (default: no)");
MODULE_PARM_DESC(lock_hcalls,
- "serialize all hCalls made by the driver "
+ "Serialize all hCalls made by the driver "
"(default: autodetect)");

DEFINE_RWLOCK(ehca_qp_idr_lock);
--
1.5.5



\
 
 \ /
  Last update: 2008-04-21 10:09    [W:0.057 / U:1.920 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site