Messages in this thread | | | Date | Sun, 20 Apr 2008 15:25:49 +0400 | From | Alexey Dobriyan <> | Subject | Re: 2.6.25-git1/2 not seeing /dev/sda1 (XFS root) or /dev/sda2 (swap) partitions on a SATA drive |
| |
On Sun, Apr 20, 2008 at 02:27:58AM +0100, Sid Boyce wrote: > 2.6.25 x86_64 boots fine as does -git1/2 boxes using reiserfs and ext3. > With xfs it can't find these and drops into a shell. > /dev/disk/by-id/scsi-SATA_WDC_WD5000AAKS-_WD-WCAS85018679-part2 swap > swap defaults 0 0 > /dev/disk/by-id/scsi-SATA_WDC_WD5000AAKS-_WD-WCAS85018679-part1 / > xfs defaults 1 1 > > From my .config > CONFIG_XFS_FS=m > CONFIG_XFS_QUOTA=y > CONFIG_XFS_POSIX_ACL=y > CONFIG_XFS_RT=y > > The other boxes are configure pretty much the same, but I can diff the > .config's if required. > # l /lib/modules/2.6.25-git2-smp/kernel/drivers/ata/sata_sil.ko > -rw-r--r-- 1 root root 272240 2008-04-19 21:54 > /lib/modules/2.6.25-git2-smp/kernel/drivers/ata/sata_sil.ko > > 00:0c.0 IDE interface: nVidia Corporation MCP55 IDE (rev a1) > 00:0d.0 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a2) > 00:0d.1 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a2) > 00:0d.2 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a2) > 03:00.0 Mass storage controller: Silicon Image, Inc. SiI 3132 Serial ATA > Raid II Controller (rev 01) > > From working 2.6.25 > # lsmod|grep sata > sata_nv 36872 2 > sata_sil24 26692 0 > libata 173664 3 pata_amd,sata_nv,sata_sil24
Double check that you've enabled CONFIG_ATA_SFF and then check you previous CONFIG_SATA_* options.
| |