lkml.org 
[lkml]   [2008]   [Apr]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Subject[PATCH] mm: allocate usemap at first instead of mem_map in sparse_init
Date
From
[PATCH] mm: allocate usemap at first instead of mem_map in sparse_init

on powerpc,

On Wed, Apr 2, 2008 at 12:22 PM, Badari Pulavarty <pbadari@us.ibm.com> wrote:
>
> On Wed, 2008-04-02 at 18:17 +1100, Michael Ellerman wrote:
> > On Wed, 2008-04-02 at 12:38 +0530, Kamalesh Babulal wrote:
> > > Andrew Morton wrote:
> > > > On Wed, 02 Apr 2008 11:55:36 +0530 Kamalesh Babulal <kamalesh@linux.vnet.ibm.com> wrote:
> > > >
> > > >> Hi Andrew,
> > > >>
> > > >> The 2.6.25-rc8-mm1 kernel panic's while bootup on the power machine(s).
> > > >>
> > > >> [ 0.000000] ------------[ cut here ]------------
> > > >> [ 0.000000] kernel BUG at arch/powerpc/mm/init_64.c:240!
> > > >> [ 0.000000] Oops: Exception in kernel mode, sig: 5 [#1]
> > > >> [ 0.000000] SMP NR_CPUS=32 NUMA PowerMac
> > > >> [ 0.000000] Modules linked in:
> > > >> [ 0.000000] NIP: c0000000003d1dcc LR: c0000000003d1dc4 CTR: c00000000002b6ac
> > > >> [ 0.000000] REGS: c00000000049b960 TRAP: 0700 Not tainted (2.6.25-rc8-mm1-autokern1)
> > > >> [ 0.000000] MSR: 9000000000021032 <ME,IR,DR> CR: 44000088 XER: 20000000
> > > >> [ 0.000000] TASK = c0000000003f9c90[0] 'swapper' THREAD: c000000000498000 CPU: 0
> > > >> [ 0.000000] GPR00: c0000000003d1dc4 c00000000049bbe0 c0000000004989d0 0000000000000001
> > > >> [ 0.000000] GPR04: d59aca40f0000000 000000000b000000 0000000000000010 0000000000000000
> > > >> [ 0.000000] GPR08: 0000000000000004 0000000000000001 c00000027e520800 c0000000004bf0f0
> > > >> [ 0.000000] GPR12: c0000000004bf020 c0000000003fa900 0000000000000000 0000000000000000
> > > >> [ 0.000000] GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
> > > >> [ 0.000000] GPR20: 0000000000000000 0000000000000000 0000000000000000 4000000001400000
> > > >> [ 0.000000] GPR24: 00000000017d64b0 c0000000003d6250 0000000000000000 c000000000504000
> > > >> [ 0.000000] GPR28: 0000000000000000 cf000000001f8000 0000000001000000 cf00000000000000
> > > >> [ 0.000000] NIP [c0000000003d1dcc] .vmemmap_populate+0xb8/0xf4
> > > >> [ 0.000000] LR [c0000000003d1dc4] .vmemmap_populate+0xb0/0xf4
> > > >> [ 0.000000] Call Trace:
> > > >> [ 0.000000] [c00000000049bbe0] [c0000000003d1dc4] .vmemmap_populate+0xb0/0xf4 (unreliable)
> > > >> [ 0.000000] [c00000000049bc70] [c0000000003d2ee8] .sparse_mem_map_populate+0x38/0x60
> > > >> [ 0.000000] [c00000000049bd00] [c0000000003c242c] .sparse_early_mem_map_alloc+0x54/0x94
> > > >> [ 0.000000] [c00000000049bd90] [c0000000003c250c] .sparse_init+0xa0/0x20c
> > > >> [ 0.000000] [c00000000049be50] [c0000000003ab7d0] .setup_arch+0x1ac/0x218
> > > >> [ 0.000000] [c00000000049bee0] [c0000000003a36ac] .start_kernel+0xe0/0x3fc
> > > >> [ 0.000000] [c00000000049bf90] [c000000000008594] .start_here_common+0x54/0xc0
> > > >> [ 0.000000] Instruction dump:
> > > >> [ 0.000000] 7fe3fb78 7ca02a14 4082000c 3860fff4 4800003c e92289c8 e96289c0 e9090002
> > > >> [ 0.000000] e8eb0002 4bc575cd 60000000 78630fe0 <0b030000> 7ffff214 7fbfe840 7fe3fb78
> > > >> [ 0.000000] ---[ end trace 31fd0ba7d8756001 ]---
> > > >> [ 0.000000] Kernel panic - not syncing: Attempted to kill the idle task!
>
> mm-make-mem_map-allocation-continuous.patch
> and its friends in -mm.
>
> You have to call sparse_init_one_section() on each pmap and usemap
> as we allocate - since valid_section() depends on it (which is needed
> by vmemmap_populate() to check if the section is populated or not).
> On ppc, we need to call htab_bolted_mapping() on each section and
> we need to skip existing sections.
>
> These patches tried to group all allocations together and then later
> calls sparse_init_one_section() - which is not good :(

so try to allocate usemap at first altogether.

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>

diff --git a/mm/sparse.c b/mm/sparse.c
index d3cb085..782ebe5 100644
--- a/mm/sparse.c
+++ b/mm/sparse.c
@@ -294,7 +294,7 @@ void __init sparse_init(void)
unsigned long pnum;
struct page *map;
unsigned long *usemap;
- struct page **section_map;
+ unsigned long **usemap_map;
int size;
int node;

@@ -305,27 +305,31 @@ void __init sparse_init(void)
* make next 2M slip to one more 2M later.
* then in big system, the memmory will have a lot hole...
* here try to allocate 2M pages continously.
+ *
+ * powerpc hope to sparse_init_one_section right after each
+ * sparse_early_mem_map_alloc, so allocate usemap_map
+ * at first.
*/
- size = sizeof(struct page *) * NR_MEM_SECTIONS;
- section_map = alloc_bootmem(size);
- if (!section_map)
- panic("can not allocate section_map\n");
+ size = sizeof(unsigned long *) * NR_MEM_SECTIONS;
+ usemap_map = alloc_bootmem(size);
+ if (!usemap_map)
+ panic("can not allocate usemap_map\n");

for (pnum = 0; pnum < NR_MEM_SECTIONS; pnum++) {
if (!present_section_nr(pnum))
continue;
- section_map[pnum] = sparse_early_mem_map_alloc(pnum);
+ usemap_map[pnum] = sparse_early_usemap_alloc(pnum);
}

for (pnum = 0; pnum < NR_MEM_SECTIONS; pnum++) {
if (!present_section_nr(pnum))
continue;

- map = section_map[pnum];
+ map = sparse_early_mem_map_alloc(pnum);
if (!map)
continue;

- usemap = sparse_early_usemap_alloc(pnum);
+ usemap = usemap_map[pnum];
if (!usemap)
continue;

@@ -333,7 +337,7 @@ void __init sparse_init(void)
usemap);
}

- free_bootmem(__pa(section_map), size);
+ free_bootmem(__pa(usemap_map), size);
}

#ifdef CONFIG_MEMORY_HOTPLUG

\
 
 \ /
  Last update: 2008-04-03 00:25    [W:0.049 / U:0.060 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site