Messages in this thread Patch in this message | | | Date | Mon, 14 Apr 2008 03:53:02 -0400 | From | Andres Salomon <> | Subject | [PATCH 3/3] OLPC: gxfb/lxfb: add DCON panel modes to framebuffer drivers |
| |
Since there's no way to autodetect panel modes, we're forced to hardcode them in the driver and add a big fat #ifdef. The OLPC DCON needs a specific mode line (at 1200x900). This adds it to both gxfb and lxfb.
Signed-off-by: Andres Salomon <dilinger@debian.org> --- drivers/video/geode/gxfb_core.c | 35 ++++++++++++++++++++++++++++++++++- drivers/video/geode/lxfb_core.c | 35 +++++++++++++++++++++++++++++++---- 2 files changed, 65 insertions(+), 5 deletions(-)
diff --git a/drivers/video/geode/gxfb_core.c b/drivers/video/geode/gxfb_core.c index 988c8e4..3e76e06 100644 --- a/drivers/video/geode/gxfb_core.c +++ b/drivers/video/geode/gxfb_core.c @@ -108,6 +108,35 @@ static const struct fb_videomode gx_modedb[] __initdata = { FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA }, }; +#ifdef CONFIG_OLPC +#include <asm/olpc.h> + +static const struct fb_videomode gx_dcon_modedb[] __initdata = { + /* The only mode the DCON has is 1200x900 */ + { NULL, 50, 1200, 900, 17460, 24, 8, 4, 5, 8, 3, + FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, + FB_VMODE_NONINTERLACED, 0 } +}; + +static void get_modedb(struct fb_videomode **modedb, unsigned int *size) +{ + if (olpc_has_dcon()) { + *modedb = (struct fb_videomode *) gx_dcon_modedb; + *size = ARRAY_SIZE(gx_dcon_modedb); + } else { + *modedb = (struct fb_videomode *) gx_modedb; + *size = ARRAY_SIZE(gx_modedb); + } +} + +#else +static void get_modedb(struct fb_videomode **modedb, unsigned int *size) +{ + *modedb = (struct fb_videomode *) gx_modedb; + *size = ARRAY_SIZE(gx_modedb); +} +#endif + static int gxfb_check_var(struct fb_var_screeninfo *var, struct fb_info *info) { if (var->xres > 1600 || var->yres > 1200) @@ -356,6 +385,9 @@ static int __init gxfb_probe(struct pci_dev *pdev, const struct pci_device_id *i int ret; unsigned long val; + struct fb_videomode *modedb_ptr; + unsigned int modedb_size; + info = gxfb_init_fbinfo(&pdev->dev); if (!info) return -ENOMEM; @@ -375,8 +407,9 @@ static int __init gxfb_probe(struct pci_dev *pdev, const struct pci_device_id *i else par->enable_crt = 1; + get_modedb(&modedb_ptr, &modedb_size); ret = fb_find_mode(&info->var, info, mode_option, - gx_modedb, ARRAY_SIZE(gx_modedb), NULL, 16); + modedb_ptr, modedb_size, NULL, 16); if (ret == 0 || ret == 4) { dev_err(&pdev->dev, "could not find valid video mode\n"); ret = -EINVAL; diff --git a/drivers/video/geode/lxfb_core.c b/drivers/video/geode/lxfb_core.c index e290981..28fa3c4 100644 --- a/drivers/video/geode/lxfb_core.c +++ b/drivers/video/geode/lxfb_core.c @@ -217,6 +217,35 @@ static const struct fb_videomode geode_modedb[] __initdata = { 0, FB_VMODE_NONINTERLACED, 0 }, }; +#ifdef CONFIG_OLPC +#include <asm/olpc.h> + +const struct fb_videomode olpc_dcon_modedb[] __initdata = { + /* The only mode the DCON has is 1200x900 */ + { NULL, 50, 1200, 900, 17460, 24, 8, 4, 5, 8, 3, + FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, + FB_VMODE_NONINTERLACED, 0 } +}; + +static void get_modedb(struct fb_videomode **modedb, unsigned int *size) +{ + if (olpc_has_dcon()) { + *modedb = (struct fb_videomode *) olpc_dcon_modedb; + *size = ARRAY_SIZE(olpc_dcon_modedb); + } else { + *modedb = (struct fb_videomode *) geode_modedb; + *size = ARRAY_SIZE(geode_modedb); + } +} + +#else +static void get_modedb(struct fb_videomode **modedb, unsigned int *size) +{ + *modedb = (struct fb_videomode *) geode_modedb; + *size = ARRAY_SIZE(geode_modedb); +} +#endif + static int lxfb_check_var(struct fb_var_screeninfo *var, struct fb_info *info) { if (var->xres > 1920 || var->yres > 1440) @@ -480,7 +509,7 @@ static int __init lxfb_probe(struct pci_dev *pdev, int ret; struct fb_videomode *modedb_ptr; - int modedb_size; + unsigned int modedb_size; info = lxfb_init_fbinfo(&pdev->dev); @@ -505,9 +534,7 @@ static int __init lxfb_probe(struct pci_dev *pdev, /* Set up the mode database */ - modedb_ptr = (struct fb_videomode *) geode_modedb; - modedb_size = ARRAY_SIZE(geode_modedb); - + get_modedb(&modedb_ptr, &modedb_size); ret = fb_find_mode(&info->var, info, mode_option, modedb_ptr, modedb_size, NULL, 16); -- 1.5.4.4
-- Need a kernel or Debian developer? Contact me, I'm looking for contracts.
| |