lkml.org 
[lkml]   [2008]   [Apr]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 3/3] wm97xx-core: Support use as a wakeup source
Hi Mark,

On Mon, Apr 14, 2008 at 06:39:35PM +0100, Mark Brown wrote:
> The PENDOWN signal from the WM97xx touch screen controllers can be used
> to generate a wakeup event when the system is suspended. Provide a new
> machine configuration option 'suspend_mode' allowing machine drivers to
> enable this. If no suspend_mode is provided then the touch panel will be
> powered down when the system is suspended.
>

Hmm, another unique module option... How about using device_can_wakeup()
infrastructure that we already have. I'm adding David Brownell to CC since
I believe he's doing a lot of similar work.

> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
> ---
> drivers/input/touchscreen/wm97xx-core.c | 22 ++++++++++++++++++++++
> include/linux/wm97xx.h | 3 +++
> 2 files changed, 25 insertions(+), 0 deletions(-)
>
> diff --git a/drivers/input/touchscreen/wm97xx-core.c b/drivers/input/touchscreen/wm97xx-core.c
> index fec07c2..e1a1ca0 100644
> --- a/drivers/input/touchscreen/wm97xx-core.c
> +++ b/drivers/input/touchscreen/wm97xx-core.c
> @@ -689,10 +689,32 @@ static int wm97xx_remove(struct device *dev)
> static int wm97xx_suspend(struct device *dev, pm_message_t state)
> {
> struct wm97xx *wm = dev_get_drvdata(dev);
> + u16 reg;
> + int suspend_mode;
> +
> + if (wm->mach_ops)
> + suspend_mode = wm->mach_ops->suspend_mode;
> + else
> + suspend_mode = 0;
>
> if (wm->input_dev->users)
> cancel_delayed_work_sync(&wm->ts_reader);
>
> + /* Power down the digitiser (bypassing the cache for resume) */
> + reg = wm97xx_reg_read(wm, AC97_WM97XX_DIGITISER2);
> + reg &= ~WM97XX_PRP_DET_DIG;
> + if (wm->input_dev->users && suspend_mode)
> + reg |= suspend_mode;
> + wm->ac97->bus->ops->write(wm->ac97, AC97_WM97XX_DIGITISER2, reg);
> +
> + /* WM9713 has an additional power bit - turn it off if there
> + * are no users or if suspend mode is zero. */
> + if (wm->id == WM9713_ID2 &&
> + (!wm->input_dev->users || !suspend_mode)) {
> + reg = wm97xx_reg_read(wm, AC97_EXTENDED_MID) | 0x8000;
> + wm97xx_reg_write(wm, AC97_EXTENDED_MID, reg);
> + }
> +
> return 0;
> }
>
> diff --git a/include/linux/wm97xx.h b/include/linux/wm97xx.h
> index ed01c7d..2082833 100644
> --- a/include/linux/wm97xx.h
> +++ b/include/linux/wm97xx.h
> @@ -258,6 +258,9 @@ struct wm97xx_mach_ops {
> /* pre and post sample - can be used to minimise any analog noise */
> void (*pre_sample) (int); /* function to run before sampling */
> void (*post_sample) (int); /* function to run after sampling */
> +
> + /* WM97XX_PRP value to configure while system is suspended */
> + u16 suspend_mode;
> };
>
> struct wm97xx {
> --
> 1.5.5
>

--
Dmitry


\
 
 \ /
  Last update: 2008-04-14 22:37    [W:0.095 / U:0.124 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site