lkml.org 
[lkml]   [2008]   [Apr]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: Western Digital GreenPower drives and Linux
Date
On Saturday 12 April 2008 17:56, Mike Snitzer wrote:

[snip]
>
> Turns out 'wdidle3 /R' on my drive reported:
> "Idle3 Timer is disabled"
>
> I took no explicit action to disable it 6 months ago. It strikes me as
> odd that WD would disable the Idle3 timer in firmware given the whole
> "GreenPower" campaign but I was pleasantly surprised; others may be
> too...

A data point from me. I have two of these, sda is 400GB and has root, boot,
swap and home partitions, sdb is 1TB and has one big partition. They're in
my desktop machine, which is usually powered on in the morning and off in
the evening. It's two months old.

sda:

9 Power_On_Hours 0x0032 099 099 000 Old_age
Always - 785
12 Power_Cycle_Count 0x0032 100 100 000 Old_age
Always - 141
193 Load_Cycle_Count 0x0032 200 200 000 Old_age
Always - 144

sdb:

9 Power_On_Hours 0x0032 099 099 000 Old_age
Always - 749
12 Power_Cycle_Count 0x0032 100 100 000 Old_age
Always - 122
193 Load_Cycle_Count 0x0032 195 195 000 Old_age
Always - 17276


The last of these numbers seems fairly high, compared to what others in this
thread have reported, especially considering that the disk is quite new.


//Niels



\
 
 \ /
  Last update: 2008-04-13 10:33    [W:0.064 / U:0.092 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site