lkml.org 
[lkml]   [2008]   [Apr]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: DRDY errors again
On 08 Apr 2008 20:42:36 -0700, Philippe Troin <phil@fifi.org> wrote:

> Bernd Eckenfels <ecki@lina.inka.de> writes:
>
> > Besides the disk it could also be a voltage problem (voltage control on
> > mainboard or power supply). I asume you ruled out thermal problems...
>
> I would completely second that. In multiple instances, I've had
> different disks behave very strangely when the power supply became
> flaky (12V at 11.3V and/or 5V hovering around 4.5V). And there seems
> to be lots of flaky power supplies around these days.
>

Acording to my sensors...:

werewolf:/etc# sensors
w83627thf-isa-0290
Adapter: ISA adapter
VCore: +1.48 V (min = +0.70 V, max = +1.87 V)
+12V: +12.22 V (min = +10.82 V, max = +13.19 V)
+3.3V: +3.34 V (min = +3.14 V, max = +3.47 V)
+5V: +5.04 V (min = +4.75 V, max = +5.25 V)
V5SB: +5.08 V (min = +4.76 V, max = +5.24 V)
VBat: +3.09 V (min = +2.40 V, max = +3.60 V)
CPU0 Fan: 2343 RPM (min = 499 RPM, div = 16)
CPU1 Fan: 2280 RPM (min = 499 RPM, div = 16)
Chas Fan: 2343 RPM (min = 499 RPM, div = 16)
VRM Temp: +50.0°C (high = +60.0°C, hyst = +35.0°C) sensor = thermistor
CPU0 Temp: +43.0°C (high = +70.0°C, hyst = +40.0°C) sensor = thermistor
CPU1 Temp: +41.5°C (high = +70.0°C, hyst = +40.0°C) sensor = thermistor

so it all look correct.

--
J.A. Magallon <jamagallon()ono!com> \ Software is like sex:
\ It's better when it's free
Mandriva Linux release 2008.1 (Cooker) for i586
Linux 2.6.23-jam05 (gcc 4.2.2 20071128 (4.2.2-2mdv2008.1)) SMP PREEMPT
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2008-04-13 02:25    [W:0.041 / U:0.348 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site