lkml.org 
[lkml]   [2008]   [Apr]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: 2.6.24.X: SATA/AHCI related boot delay. - not with 2.6.24.3
Volker Armin Hemmann wrote:
> Hi,
>
>> Aiee.... Can you please try 2.6.25-rc8 with both configurations? And
>> w/o systemrescuecd? Just seeing whether things mount properly or not is
>> good enough. There isn't much risk of losing data.
>
> 2.6.25-rc8 is a 'no change'. AHCI+pci=nomsi boots, AHCI without hangs.
> with AHCI I also get this:
>
> [ 0.363828] ------------[ cut here ]------------
> [ 0.363828] WARNING: at drivers/ata/ahci.c:645 ahci_init_one+0x190/0xa3a()
> [ 0.363828] Modules linked in:
> [ 0.363828] Pid: 1, comm: swapper Not tainted 2.6.25-rc8 #2

Heh.. that's AHCI_EN not getting set. Peer, any ideas? The driver set
AHCI_EN in the HOST_CTL register but on reading back it's still clear.

Thanks.

--
tejun


\
 
 \ /
  Last update: 2008-04-12 03:31    [W:0.115 / U:0.584 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site