lkml.org 
[lkml]   [2008]   [Apr]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    From
    SubjectRe: x86 git tree broken (bisected)
    Date
    On Friday, 11 of April 2008, Yinghai Lu wrote:
    > On Fri, Apr 11, 2008 at 12:26 PM, Rafael J. Wysocki <rjw@sisk.pl> wrote:
    > > On Friday, 11 of April 2008, Rafael J. Wysocki wrote:
    > > > On Thursday, 10 of April 2008, Ingo Molnar wrote:
    > > > >
    > > > > * Ingo Molnar <mingo@elte.hu> wrote:
    > > > >
    > > > > > > > > First, the X server doesn't want to start (it says it couldn't
    > > > > > > > > mmap the framebuffer).
    > > > > > > >
    > > > > > > > could you send your .config?
    > > > > > >
    > > > > > > Attached.
    > > > > >
    > > > > > could you disable this option:
    > > > > >
    > > > > > CONFIG_NONPROMISC_DEVMEM=y
    > > > > >
    > > > > > does it help with the X problem?
    > > >
    > > > That didn't help.
    > > >
    > > > > btw., Xorg works fine here on a comparable AMD system - but i use a
    > > > > rather new distro (Fedora 8) which has Xorg 7.2.
    > > >
    > > > My system is an OpenSUSE 10.3 and it has Xorg 7.2 as well.
    > > >
    > > > I think the problem is somehow related to the Radeon.
    > >
    > > The bisection turned up commit ea1441bdf53692c3dc1fd2658addcf1205629661
    > > "x86: use bus conf in NB conf fun1 to get bus range on, on 64-bit" as the one
    > > causing problems.
    > >
    > > Unfortunately, I can't revert cleanly it, because there are two more commits
    > > depending on it in a highly nontrivial fashion, so I have reverted all three
    > > commits
    > >
    > > a365998cd2cecfb827469dbd57c29602c106cb83
    > > 44f7f90fbe7a3a99aab082f765346514b7b5c705
    > > ea1441bdf53692c3dc1fd2658addcf1205629661
    > >
    > > and X starts again. Also, suspend to RAM works from under X.
    >
    > please keep the three patches and applied the two attached debug patches.
    >
    > i wonder if there is some io allocation overlapping with your system.

    Attached is a boot dmesg output from the current x86 git tree with your two
    patches applied.

    Thanks,
    Rafael
    Linux version 2.6.25-rc8-x86-latest.git (rafael@chimera) (gcc version 4.2.1 (SUSE Linux)) #16 SMP Fri Apr 11 23:08:15 CEST 2008
    Command line: root=/dev/md1 vga=0x31a resume=/dev/sda2
    BIOS-provided physical RAM map:
    BIOS-e820: 0000000000000000 - 000000000009ec00 (usable)
    BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved)
    BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved)
    BIOS-e820: 0000000000100000 - 000000007ffb0000 (usable)
    BIOS-e820: 000000007ffb0000 - 000000007ffc0000 (ACPI data)
    BIOS-e820: 000000007ffc0000 - 000000007fff0000 (ACPI NVS)
    BIOS-e820: 000000007fff0000 - 0000000080000000 (reserved)
    BIOS-e820: 00000000ff7c0000 - 0000000100000000 (reserved)
    Entering add_active_range(0, 0, 158) 0 entries of 256 used
    Entering add_active_range(0, 256, 524208) 1 entries of 256 used
    max_pfn_mapped = 1048576
    x86: PAT support disabled.
    init_memory_mapping
    DMI 2.3 present.
    ACPI: RSDP 000F9B60, 0014 (r0 ACPIAM)
    ACPI: RSDT 7FFB0000, 0030 (r1 A M I OEMRSDT 8000526 MSFT 97)
    ACPI: FACP 7FFB0200, 0084 (r2 A M I OEMFACP 8000526 MSFT 97)
    ACPI: DSDT 7FFB0400, 45A7 (r1 939M2 939M2120 120 INTL 2002026)
    ACPI: FACS 7FFC0000, 0040
    ACPI: APIC 7FFB0390, 0068 (r1 A M I OEMAPIC 8000526 MSFT 97)
    ACPI: OEMB 7FFC0040, 0056 (r1 A M I AMI_OEM 8000526 MSFT 97)
    Entering add_active_range(0, 0, 158) 0 entries of 256 used
    Entering add_active_range(0, 256, 524208) 1 entries of 256 used
    early res: 0 [0-fff] BIOS data page
    early res: 1 [6000-7fff] TRAMPOLINE
    early res: 2 [200000-b33c6f] TEXT DATA BSS
    early res: 3 [378e2000-37fefac8] RAMDISK
    early res: 4 [9ec00-fffff] BIOS reserved
    early res: 5 [8000-bfff] PGTABLE
    Zone PFN ranges:
    DMA 0 -> 4096
    DMA32 4096 -> 1048576
    Normal 1048576 -> 1048576
    Movable zone start PFN for each node
    early_node_map[2] active PFN ranges
    0: 0 -> 158
    0: 256 -> 524208
    On node 0 totalpages: 524110
    DMA zone: 56 pages used for memmap
    DMA zone: 2461 pages reserved
    DMA zone: 1481 pages, LIFO batch:0
    DMA32 zone: 7110 pages used for memmap
    DMA32 zone: 513002 pages, LIFO batch:31
    Normal zone: 0 pages used for memmap
    Movable zone: 0 pages used for memmap
    ACPI: PM-Timer IO Port: 0x808
    ACPI: Local APIC address 0xfee00000
    ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23
    ACPI: IOAPIC (id[0x03] address[0xfec10000] gsi_base[24])
    IOAPIC[1]: apic_id 3, version 0, address 0xfec10000, GSI 24-39
    ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
    ACPI: IRQ0 used by override.
    ACPI: IRQ2 used by override.
    ACPI: IRQ9 used by override.
    Setting APIC routing to flat
    Using ACPI (MADT) for SMP configuration information
    PM: Registered nosave memory: 000000000009e000 - 000000000009f000
    PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    PM: Registered nosave memory: 00000000000a0000 - 00000000000e8000
    PM: Registered nosave memory: 00000000000e8000 - 0000000000100000
    Allocating PCI resources starting at 88000000 (gap: 80000000:7f7c0000)
    SMP: Allowing 2 CPUs, 0 hotplug CPUs
    PERCPU: Allocating 31152 bytes of per cpu data
    Built 1 zonelists in Zone order, mobility grouping on. Total pages: 514483
    Kernel command line: root=/dev/md1 vga=0x31a resume=/dev/sda2
    Initializing CPU#0
    PID hash table entries: 4096 (order: 12, 32768 bytes)
    TSC calibrated against PM_TIMER
    Marking TSC unstable due to TSCs unsynchronized
    time.c: Detected 2200.078 MHz processor.
    Console: colour dummy device 80x25
    console [tty0] enabled
    Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
    ... MAX_LOCKDEP_SUBCLASSES: 8
    ... MAX_LOCK_DEPTH: 48
    ... MAX_LOCKDEP_KEYS: 2048
    ... CLASSHASH_SIZE: 1024
    ... MAX_LOCKDEP_ENTRIES: 8192
    ... MAX_LOCKDEP_CHAINS: 16384
    ... CHAINHASH_SIZE: 8192
    memory used by lock dependency info: 1648 kB
    per task-struct memory footprint: 2688 bytes
    Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
    Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
    Checking aperture...
    Node 0: aperture @ de000000 size 32 MB
    Aperture too small (32 MB)
    AGP bridge at 00:04:00
    Aperture from AGP @ de000000 size 4096 MB (APSIZE 0)
    Aperture too small (0 MB)
    Your BIOS doesn't leave a aperture memory hole
    Please enable the IOMMU option in the BIOS setup
    This costs you 64 MB of RAM
    Mapping aperture over 65536 KB of RAM @ 4000000
    PM: Registered nosave memory: 0000000004000000 - 0000000008000000
    Memory: 1981548k/2096832k available (2985k kernel code, 114240k reserved, 1655k data, 284k init)
    CPA: page pool initialized 1 of 1 pages preallocated
    Calibrating delay using timer specific routine.. 4404.11 BogoMIPS (lpj=8808221)
    Security Framework initialized
    SELinux: Initializing.
    SELinux: Starting in permissive mode
    selinux_register_security: Registering secondary module capability
    Capability LSM initialized as secondary
    Mount-cache hash table entries: 256
    CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
    CPU: L2 Cache: 512K (64 bytes/line)
    ACPI: Core revision 20070126
    CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ stepping 01
    Using local APIC timer interrupts.
    APIC timer calibration result 12500446
    Detected 12.500 MHz APIC timer.
    lockdep: fixing up alternatives.
    Booting processor 1/1 ip 6000
    Initializing CPU#1
    Calibrating delay using timer specific routine.. 4400.18 BogoMIPS (lpj=8800363)
    CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
    CPU: L2 Cache: 512K (64 bytes/line)
    x86: PAT support disabled.
    CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ stepping 01
    Brought up 2 CPUs
    Total of 2 processors activated (8804.29 BogoMIPS).
    CPU0 attaching sched-domain:
    domain 0: span 3
    groups: 1 2
    CPU1 attaching sched-domain:
    domain 0: span 3
    groups: 2 1
    khelper used greatest stack depth: 5752 bytes left
    net_namespace: 1112 bytes
    Time: 21:11:45 Date: 04/11/08
    NET: Registered protocol family 16
    No dock devices found.
    node 0 link 0: io port [1000, ffffff]
    TOM: 0000000080000000 aka 2048M
    node 0 link 0: mmio [e0000000, efffffff]
    node 0 link 0: mmio [a0000, bffff]
    node 0 link 0: mmio [80000000, ffffffff]
    bus: [00,ff] on node 0 link 0
    bus: 00 index 0 io port: [1000, ffffff]
    bus: 00 index 1 io port: [0, ffff]
    bus: 00 index 2 mmio: [80000000, fcffffffff]
    bus: 00 index 3 mmio: [a0000, bffff]
    bus: 00 index 4 mmio: [80000000, ffffffff]
    ACPI: bus type pci registered
    PCI: Using configuration type 1 for base access
    ACPI: EC: Look up EC in DSDT
    ACPI: Interpreter enabled
    ACPI: (supports S0 S1 S3 S4 S5)
    ACPI: Using IOAPIC for interrupt routing
    ACPI: PCI Root Bridge [PCI0] (0000:00)
    PCI: 0000:00:04.0 reg 10 32bit mmio: [de000000, dfffffff]
    pci 0000:00:07.1: quirk: region 0800-083f claimed by ali7101 ACPI
    PCI: 0000:00:08.0 reg 10 io port: [e800, e8ff]
    PCI: 0000:00:08.0 reg 14 32bit mmio: [ff6ff000, ff6fffff]
    PCI: 0000:00:11.0 reg 10 io port: [e400, e4ff]
    PCI: 0000:00:11.0 reg 14 32bit mmio: [ff6fec00, ff6fecff]
    PCI: 0000:00:12.0 reg 20 io port: [ff00, ff0f]
    PCI: 0000:00:12.1 reg 10 io port: [ec00, ec07]
    PCI: 0000:00:12.1 reg 14 io port: [e080, e083]
    PCI: 0000:00:12.1 reg 18 io port: [e000, e007]
    PCI: 0000:00:12.1 reg 1c io port: [dc00, dc03]
    PCI: 0000:00:12.1 reg 20 io port: [d880, d88f]
    PCI: 0000:00:13.0 reg 10 32bit mmio: [ff6fd000, ff6fdfff]
    PCI: 0000:00:13.1 reg 10 32bit mmio: [ff6fc000, ff6fcfff]
    PCI: 0000:00:13.2 reg 10 32bit mmio: [ff6fb000, ff6fbfff]
    PCI: 0000:00:13.3 reg 10 32bit mmio: [ff6fe800, ff6fe8ff]
    PCI: 0000:01:00.0 reg 10 32bit mmio: [d0000000, d7ffffff]
    PCI: 0000:01:00.0 reg 14 io port: [b000, b0ff]
    PCI: 0000:01:00.0 reg 18 32bit mmio: [ff2f0000, ff2fffff]
    PCI: 0000:01:00.1 reg 10 32bit mmio: [ff2e0000, ff2effff]
    PCI: bridge 0000:00:01.0 io port: [9000, bfff]
    PCI: bridge 0000:00:01.0 32bit mmio: [ff200000, ff2fffff]
    PCI: bridge 0000:00:01.0 32bit mmio pref: [cbf00000, dbefffff]
    PCI: bridge 0000:00:02.0 32bit mmio: [ff300000, ff3fffff]
    PCI: bridge 0000:00:05.0 32bit mmio: [ff400000, ff4fffff]
    PCI: 0000:04:06.0 reg 10 io port: [c800, c8ff]
    PCI: 0000:04:06.0 reg 14 32bit mmio: [ff5ffc00, ff5ffcff]
    PCI: Transparent bridge - 0000:00:06.0
    PCI: bridge 0000:00:06.0 io port: [c000, cfff]
    PCI: bridge 0000:00:06.0 32bit mmio: [ff500000, ff5fffff]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HTT_._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEB1._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEB2._PRT]
    ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11 12 14 *15), disabled.
    ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
    ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
    ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15)
    ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 *11 12 14 15)
    ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 10 11 12 14 15)
    ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15)
    ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *9
    ACPI: PCI Interrupt Link [LNKP] (IRQs 3 4 *5 6 7 10 11 12 14 15)
    ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - 6A, should be 5D [20070126]
    Linux Plug and Play Support v0.97 (c) Adam Belay
    pnp: PnP ACPI init
    ACPI: bus type pnp registered
    pnp: PnP ACPI: found 14 devices
    ACPI: ACPI bus type pnp unregistered
    SCSI subsystem initialized
    libata version 3.00 loaded.
    usbcore: registered new interface driver usbfs
    usbcore: registered new interface driver hub
    usbcore: registered new device driver usb
    PCI: Using ACPI for IRQ routing
    PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
    PCI: Cannot allocate resource region 8 of bridge 0000:00:01.0
    PCI: Cannot allocate resource region 8 of bridge 0000:00:02.0
    PCI: Cannot allocate resource region 8 of bridge 0000:00:05.0
    PCI: Cannot allocate resource region 8 of bridge 0000:00:06.0
    PCI: Cannot allocate resource region 1 of device 0000:00:08.0
    PCI: Cannot allocate resource region 1 of device 0000:00:11.0
    PCI: Cannot allocate resource region 0 of device 0000:00:13.0
    PCI: Cannot allocate resource region 0 of device 0000:00:13.1
    PCI: Cannot allocate resource region 0 of device 0000:00:13.2
    PCI: Cannot allocate resource region 0 of device 0000:00:13.3
    PCI: Cannot allocate resource region 2 of device 0000:01:00.0
    PCI: Cannot allocate resource region 0 of device 0000:01:00.1
    PCI: Cannot allocate resource region 1 of device 0000:04:06.0
    DMAR:parse DMAR table failure.
    agpgart: Detected AGP bridge 20
    agpgart: Aperture pointing to RAM
    agpgart: Aperture from AGP @ de000000 size 4096 MB
    agpgart: Aperture too small (0 MB)
    agpgart: No usable aperture found.
    agpgart: Consider rebooting with iommu=memaper=2 to get a good aperture.
    system 00:07: ioport range 0x480-0x48f has been reserved
    system 00:07: ioport range 0x4d0-0x4d1 has been reserved
    system 00:07: ioport range 0x800-0x87f could not be reserved
    system 00:07: ioport range 0x400-0x40f has been reserved
    system 00:08: iomem range 0xfec00000-0xfec00fff has been reserved
    system 00:08: iomem range 0xfee00000-0xfee00fff has been reserved
    system 00:08: iomem range 0xe0000000-0xefffffff has been reserved
    system 00:08: iomem range 0xfec10000-0xfec10fff has been reserved
    system 00:08: iomem range 0xffb80000-0xffffffff could not be reserved
    system 00:0c: ioport range 0x290-0x29f has been reserved
    system 00:0d: iomem range 0x0-0x9ffff could not be reserved
    system 00:0d: iomem range 0xc0000-0xcffff has been reserved
    system 00:0d: iomem range 0xe0000-0xfffff could not be reserved
    system 00:0d: iomem range 0x100000-0x7fffffff could not be reserved
    system 00:0d: iomem range 0x0-0x0 could not be reserved
    PCI: Bridge: 0000:00:01.0
    IO window: 9000-bfff
    MEM window: 0x100000000-0x1000fffff
    PREFETCH window: 0x00000000cbf00000-0x00000000dbefffff
    PCI: Bridge: 0000:00:02.0
    IO window: disabled.
    MEM window: disabled.
    PREFETCH window: disabled.
    PCI: Bridge: 0000:00:05.0
    IO window: disabled.
    MEM window: disabled.
    PREFETCH window: disabled.
    PCI: Bridge: 0000:00:06.0
    IO window: c000-cfff
    MEM window: 0x100100000-0x1001fffff
    PREFETCH window: 0x0000000100200000-0x00000001002fffff
    ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 29 (level, low) -> IRQ 29
    PCI: Setting latency timer of device 0000:00:01.0 to 64
    ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 34 (level, low) -> IRQ 34
    PCI: Setting latency timer of device 0000:00:02.0 to 64
    PCI: Setting latency timer of device 0000:00:05.0 to 64
    PCI: Setting latency timer of device 0000:00:06.0 to 64
    bus: 00 index 0 mmio: [1000, ffffff]
    bus: 00 index 1 io port: [0, ffff]
    bus: 00 index 2 mmio: [80000000, fcffffffff]
    bus: 00 index 3 mmio: [a0000, bffff]
    bus: 00 index 4 mmio: [80000000, ffffffff]
    bus: 01 index 0 io port: [9000, bfff]
    bus: 01 index 1 mmio: [100000000, 1000fffff]
    bus: 01 index 2 mmio: [cbf00000, dbefffff]
    bus: 01 index 3 mmio: [0, 0]
    bus: 02 index 0 mmio: [0, 0]
    bus: 02 index 1 mmio: [ff300000, ff3fffff]
    bus: 02 index 2 mmio: [0, 0]
    bus: 02 index 3 mmio: [0, 0]
    bus: 03 index 0 mmio: [0, 0]
    bus: 03 index 1 mmio: [ff400000, ff4fffff]
    bus: 03 index 2 mmio: [0, 0]
    bus: 03 index 3 mmio: [0, 0]
    bus: 04 index 0 io port: [c000, cfff]
    bus: 04 index 1 mmio: [100100000, 1001fffff]
    bus: 04 index 2 mmio: [100200000, 1002fffff]
    bus: 04 index 3 mmio: [1000, ffffff]
    bus: 04 index 4 io port: [0, ffff]
    bus: 04 index 5 mmio: [80000000, fcffffffff]
    bus: 04 index 6 mmio: [a0000, bffff]
    bus: 04 index 7 mmio: [80000000, ffffffff]
    NET: Registered protocol family 2
    Switched to high resolution mode on CPU 0
    Switched to high resolution mode on CPU 1
    IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
    TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
    TCP bind hash table entries: 65536 (order: 9, 3670016 bytes)
    TCP: Hash tables configured (established 262144 bind 65536)
    TCP reno registered
    checking if image is initramfs... it is
    Freeing initrd memory: 7222k freed
    audit: initializing netlink socket (disabled)
    type=2000 audit(1207948305.996:1): initialized
    Total HugeTLB memory allocated, 0
    VFS: Disk quotas dquot_6.5.1
    Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    SELinux: Registering netfilter hooks
    io scheduler noop registered
    io scheduler anticipatory registered (default)
    io scheduler deadline registered
    io scheduler cfq registered
    pci 0000:01:00.0: Boot video device
    PCI: Setting latency timer of device 0000:00:01.0 to 64
    assign_interrupt_mode Found MSI capability
    Allocate Port Service[0000:00:01.0:pcie00]
    PCI: Setting latency timer of device 0000:00:02.0 to 64
    assign_interrupt_mode Found MSI capability
    Allocate Port Service[0000:00:02.0:pcie00]
    vesafb: framebuffer at 0xd0000000, mapped to 0xffffc20000080000, using 5120k, total 16384k
    vesafb: mode is 1280x1024x16, linelength=2560, pages=5
    vesafb: scrolling: redraw
    vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
    Console: switching to colour frame buffer device 160x64
    fb0: VESA VGA frame buffer device
    Real Time Clock Driver v1.12ac
    Linux agpgart interface v0.103
    Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
    serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    brd: module loaded
    loop: module loaded
    PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
    serio: i8042 KBD port at 0x60,0x64 irq 1
    serio: i8042 AUX port at 0x60,0x64 irq 12
    mice: PS/2 mouse device common for all mice
    input: AT Translated Set 2 keyboard as /class/input/input0
    input: PC Speaker as /class/input/input1
    logips2pp: Detected unknown logitech mouse model 127
    input: ImExPS/2 Logitech Explorer Mouse as /class/input/input2
    md: multipath personality registered for level -4
    cpuidle: using governor ladder
    cpuidle: using governor menu
    TCP bic registered
    NET: Registered protocol family 1
    NET: Registered protocol family 33
    PM: Resume from partition /dev/sda2
    PM: Checking hibernation image.
    PM: Error -6 checking image file
    PM: Resume from disk failed.
    Magic number: 4:657:196
    hash matches device ttys8
    hash matches device ttypb
    Freeing unused kernel memory: 284k freed
    Write protecting the kernel read-only data: 4356k
    mount used greatest stack depth: 5592 bytes left
    ACPI: ACPI0007:00 is registered as cooling_device0
    ACPI: ACPI0007:01 is registered as cooling_device1
    ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 19 (level, low) -> IRQ 19
    scsi0 : pata_ali
    scsi1 : pata_ali
    ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
    ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
    ata1.00: ATAPI: TSSTcorpCD/DVDW SH-S182M, SB03, max UDMA/33
    ata1.00: WARNING: ATAPI DMA disabled for reliablity issues. It can be enabled
    ata1.00: WARNING: via pata_ali.atapi_dma modparam or corresponding sysfs node.
    ata1.00: configured for UDMA/33
    scsi 0:0:0:0: CD-ROM TSSTcorp CD/DVDW SH-S182M SB03 PQ: 0 ANSI: 5
    modprobe used greatest stack depth: 4664 bytes left
    sata_uli 0000:00:12.1: version 1.3
    ACPI: PCI Interrupt 0000:00:12.1[A] -> GSI 19 (level, low) -> IRQ 19
    scsi2 : sata_uli
    scsi3 : sata_uli
    ata3: SATA max UDMA/133 cmd 0xec00 ctl 0xe080 bmdma 0xd880 irq 19
    ata4: SATA max UDMA/133 cmd 0xe000 ctl 0xdc00 bmdma 0xd888 irq 19
    ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    ata3.00: ATA-7: SAMSUNG HD160JJ, WU100-33, max UDMA7
    ata3.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
    ata3.00: configured for UDMA/133
    ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    ata4.00: ATA-7: SAMSUNG SP2004C, VM100-50, max UDMA7
    ata4.00: 390721968 sectors, multi 16: LBA48 NCQ (depth 0/32)
    ata4.00: configured for UDMA/133
    scsi 2:0:0:0: Direct-Access ATA SAMSUNG HD160JJ WU10 PQ: 0 ANSI: 5
    scsi 3:0:0:0: Direct-Access ATA SAMSUNG SP2004C VM10 PQ: 0 ANSI: 5
    md: raid1 personality registered for level 1
    BIOS EDD facility v0.16 2004-Jun-25, 6 devices found
    Driver 'sd' needs updating - please use bus_type methods
    sd 2:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
    sd 2:0:0:0: [sda] Write Protect is off
    sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
    sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sd 2:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
    sd 2:0:0:0: [sda] Write Protect is off
    sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
    sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
    sda:<6>ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 20 (level, low) -> IRQ 20
    ohci_hcd 0000:00:13.0: OHCI Host Controller
    sda1 sda2 sda3 sda4 <<6>ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1
    ohci_hcd 0000:00:13.0: irq 20, io mem 0x100301000
    sda5 sda6 sda7 sda8 sda9 >
    sd 2:0:0:0: [sda] Attached SCSI disk
    usb usb1: configuration #1 chosen from 1 choice
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 3 ports detected
    sd 3:0:0:0: [sdb] 390721968 512-byte hardware sectors (200050 MB)
    sd 3:0:0:0: [sdb] Write Protect is off
    sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
    sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sd 3:0:0:0: [sdb] 390721968 512-byte hardware sectors (200050 MB)
    sd 3:0:0:0: [sdb] Write Protect is off
    sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
    sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 sdb6 sdb7<6>usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
    usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    sdb8<6>usb usb1: Product: OHCI Host Controller
    usb usb1: Manufacturer: Linux 2.6.25-rc8-x86-latest.git ohci_hcd
    sdb9<6>usb usb1: SerialNumber: 0000:00:13.0
    ACPI: PCI Interrupt 0000:00:13.1[B] -> GSI 21 (level, low) -> IRQ 21
    ohci_hcd 0000:00:13.1: OHCI Host Controller
    sdb10 >
    ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 2
    sd 3:0:0:0: [sdb] Attached SCSI disk
    ohci_hcd 0000:00:13.1: irq 21, io mem 0x100302000
    modprobe used greatest stack depth: 4280 bytes left
    usb usb2: configuration #1 chosen from 1 choice
    hub 2-0:1.0: USB hub found
    hub 2-0:1.0: 3 ports detected
    usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
    usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    usb usb2: Product: OHCI Host Controller
    usb usb2: Manufacturer: Linux 2.6.25-rc8-x86-latest.git ohci_hcd
    usb usb2: SerialNumber: 0000:00:13.1
    ACPI: PCI Interrupt 0000:00:13.2[C] -> GSI 22 (level, low) -> IRQ 22
    ohci_hcd 0000:00:13.2: OHCI Host Controller
    ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3
    ohci_hcd 0000:00:13.2: irq 22, io mem 0x100303000
    usb usb3: configuration #1 chosen from 1 choice
    hub 3-0:1.0: USB hub found
    hub 3-0:1.0: 3 ports detected
    usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
    usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    usb usb3: Product: OHCI Host Controller
    usb usb3: Manufacturer: Linux 2.6.25-rc8-x86-latest.git ohci_hcd
    usb usb3: SerialNumber: 0000:00:13.2
    ACPI: PCI Interrupt 0000:00:13.3[D] -> GSI 23 (level, low) -> IRQ 23
    ehci_hcd 0000:00:13.3: EHCI Host Controller
    ehci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 4
    ehci_hcd 0000:00:13.3: debug port 1
    ehci_hcd 0000:00:13.3: irq 23, io mem 0x100304100
    ehci_hcd 0000:00:13.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
    usb usb4: configuration #1 chosen from 1 choice
    hub 4-0:1.0: USB hub found
    hub 4-0:1.0: 8 ports detected
    usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
    usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    usb usb4: Product: EHCI Host Controller
    usb usb4: Manufacturer: Linux 2.6.25-rc8-x86-latest.git ehci_hcd
    usb usb4: SerialNumber: 0000:00:13.3
    md: raid0 personality registered for level 0
    xor: automatically using best checksumming function: generic_sse
    generic_sse: 7022.000 MB/sec
    xor: using function: generic_sse (7022.000 MB/sec)
    async_tx: api initialized (sync-only)
    raid6: int64x1 2149 MB/s
    raid6: int64x2 2731 MB/s
    raid6: int64x4 2371 MB/s
    raid6: int64x8 2188 MB/s
    raid6: sse2x1 2277 MB/s
    raid6: sse2x2 3125 MB/s
    raid6: sse2x4 3741 MB/s
    raid6: using algorithm sse2x4 (3741 MB/s)
    md: raid6 personality registered for level 6
    md: raid5 personality registered for level 5
    md: raid4 personality registered for level 4
    md: md1 stopped.
    md: bind<sda3>
    md: bind<sdb3>
    raid1: raid set md1 active with 2 out of 2 mirrors
    PM: Marking nosave pages: 000000000009e000 - 0000000000100000
    PM: Marking nosave pages: 0000000004000000 - 0000000008000000
    PM: Basic memory bitmaps created
    PM: Basic memory bitmaps freed
    PM: Starting manual resume from disk
    PM: Resume from partition 8:2
    PM: Checking hibernation image.
    PM: Resume from disk failed.
    kjournald starting. Commit interval 5 seconds
    EXT3 FS on md1, internal journal
    EXT3-fs: mounted filesystem with ordered data mode.
    mount used greatest stack depth: 3712 bytes left
    modprobe used greatest stack depth: 3656 bytes left
    scsi 0:0:0:0: Attached scsi generic sg0 type 5
    sd 2:0:0:0: Attached scsi generic sg1 type 0
    sd 3:0:0:0: Attached scsi generic sg2 type 0
    input: Power Button (FF) as /class/input/input3
    ACPI: Power Button (FF) [PWRF]
    input: Power Button (CM) as /class/input/input4
    ACPI: Power Button (CM) [PWRB]
    uli526x: ULi M5261/M5263 net driver, version 0.9.3 (2005-7-29)
    ACPI: PCI Interrupt 0000:00:11.0[A] -> GSI 17 (level, low) -> IRQ 17
    Driver 'sr' needs updating - please use bus_type methods
    eth0: ULi M5263 at pci0000:00:11.0, 00:13:8f:3a:0b:96, irq 17.
    8139too Fast Ethernet driver 0.9.28
    ACPI: PCI Interrupt 0000:04:06.0[A] -> GSI 21 (level, low) -> IRQ 21
    eth1: RealTek RTL8139 at 0xc800, 00:48:54:4b:5c:38, IRQ 21
    eth1: Identified 8139 chip type 'RTL-8139A'
    sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
    Uniform CD-ROM driver Revision: 3.20
    sr 0:0:0:0: Attached scsi CD-ROM sr0
    Floppy drive(s): fd0 is 1.44M
    FDC 0 is a post-1991 82077
    parport_pc 00:06: reported by Plug and Play ACPI
    parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
    udev: renamed network interface eth1 to eth0
    udev: renamed network interface eth0_rename to eth1
    ACPI: PCI Interrupt 0000:00:08.0[A] -> GSI 18 (level, low) -> IRQ 18
    ALSA /home/rafael/src/linux-2.6-x86/sound/pci/ac97/ac97_codec.c:2053: AC'97 1 does not respond - RESET
    ALSA /home/rafael/src/linux-2.6-x86/sound/pci/ac97/ac97_codec.c:2062: AC'97 1 access is not valid [0xffffffff], removing mixer.
    ALSA /home/rafael/src/linux-2.6-x86/sound/pci/intel8x0.c:2157: Unable to initialize codec #1
    intel8x0_measure_ac97_clock: measured 52386 usecs
    intel8x0: clocking to 48000
    md: md2 stopped.
    device-mapper: uevent: version 1.0.3
    md: bind<sda5>
    device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
    md: bind<sdb5>
    raid1: raid set md2 active with 2 out of 2 mirrors
    md: md3 stopped.
    md: bind<sda6>
    md: bind<sdb6>
    raid1: raid set md3 active with 2 out of 2 mirrors
    md: md4 stopped.
    md: bind<sda8>
    md: bind<sdb8>
    raid1: raid set md4 active with 2 out of 2 mirrors
    md: md5 stopped.
    md: bind<sda9>
    md: bind<sdb9>
    raid1: raid set md5 active with 2 out of 2 mirrors
    md: md0 stopped.
    md: bind<sda1>
    md: bind<sdb1>
    raid1: raid set md0 active with 2 out of 2 mirrors
    fsck.ext3 used greatest stack depth: 3432 bytes left
    kjournald starting. Commit interval 5 seconds
    EXT3 FS on md0, internal journal
    EXT3-fs: mounted filesystem with ordered data mode.
    ReiserFS: md4: found reiserfs format "3.6" with standard journal
    ReiserFS: md4: using ordered data mode
    ReiserFS: md4: journal params: device md4, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
    ReiserFS: md4: checking transaction log (md4)
    ReiserFS: md4: Using r5 hash to sort names
    ReiserFS: md5: found reiserfs format "3.6" with standard journal
    ReiserFS: md5: using ordered data mode
    ReiserFS: md5: journal params: device md5, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
    ReiserFS: md5: checking transaction log (md5)
    ReiserFS: md5: Using r5 hash to sort names
    kjournald starting. Commit interval 5 seconds
    EXT3 FS on md2, internal journal
    EXT3-fs: mounted filesystem with ordered data mode.
    kjournald starting. Commit interval 5 seconds
    EXT3 FS on md3, internal journal
    EXT3-fs: mounted filesystem with ordered data mode.
    Adding 2104504k swap on /dev/sda2. Priority:42 extents:1 across:2104504k
    Adding 2104504k swap on /dev/sdb2. Priority:42 extents:1 across:2104504k
    powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ processors (2 cpu cores) (version 2.20.00)
    powernow-k8: 0 : fid 0xe (2200 MHz), vid 0xa
    powernow-k8: 1 : fid 0xc (2000 MHz), vid 0xa
    powernow-k8: 2 : fid 0xa (1800 MHz), vid 0xa
    powernow-k8: 3 : fid 0x2 (1000 MHz), vid 0xa
    Xorg:4255 /dev/mem ioremap_change_attr failed write-back for 100000000-100010000
    NET: Registered protocol family 10
    lo: Disabled Privacy Extensions
    ADDRCONF(NETDEV_UP): eth1: link is not ready
    ip6_tables: (C) 2000-2006 Netfilter Core Team
    ip_tables: (C) 2000-2006 Netfilter Core Team
    warning: `named' uses 32-bit capabilities (legacy support in use)
    uli526x: eth1 NIC Link is Up 100 Mbps Full duplex
    ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
    Clocksource tsc unstable (delta = -75598224 ns)
    eth1: no IPv6 routers present
    X:5038 /dev/mem ioremap_change_attr failed write-back for 100000000-100010000
    \
     
     \ /
      Last update: 2008-04-11 22:53    [W:2.830 / U:0.044 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site