lkml.org 
[lkml]   [2008]   [Apr]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [RFC][PATCH] PM: Introduce new top level suspend and hibernation callbacks (rev. 6)
Date
On Tuesday, 1 of April 2008, Nigel Cunningham wrote:
> Hi Rafael.

Hi,

> Please excuse me, but I'm going to ask the questions you get from
> someone who hasn't followed development to date, and is thus reading the
> explanation without prior knowledge. Hopefully that will be helpful when
> you come to finalising the commit message.
>
> On Mon, 2008-03-31 at 23:29 +0200, Rafael J. Wysocki wrote:
> > From: Rafael J. Wysocki <rjw@sisk.pl>
> >
> > Introduce 'struct pm_ops' and 'struct pm_ext_ops' representing
> > suspend and hibernation operations for bus types, device classes and
> > device types.
>
> Does ..._ext_... mean extended? (external?) If 'extended' (or if not),
> does that imply that they're mutually exclusive alternatives for drivers
> to use?

'ext' means 'extended'. The idea is that the 'extended' version will be used
by bus types / driver types that don't need to implement the _noirq callbacks.
Both the platform and PCI bus types generally allow drivers to use _noirq
callbacks, so they use 'struct pm_ext_ops', as well as their corresponding
driver types.

> > Modify the PM core to use 'struct pm_ops' and 'struct pm_ext_ops'
> > objects, if defined, instead of the ->suspend() and ->resume() or,
> > respectively, ->suspend_late() and ->resume_early() callbacks that
> > will be considered as legacy and gradually phased out.
>
> 'Respectively' doesn't look like the right word to use, but I'm not sure
> I understand correctly what you're trying to say. The way it's written
> at the moment, it sounds to me like you're saying that suspend_late()
> and resume_early are deprecated, but you're modifying the PM core to use
> them.

Yes, the changelog is wrong, because I used a separate structure for the
_noirq callbacks and (quite blindly) change the name of the structure in the
changelog, instead of reworking it.

> > Change the behavior of the PM core wrt the error codes returned by
> > device drivers' ->resume() callbacks. Namely, if an error code
> > is returned by one of them, the device for which it's been returned
> > is regarded as "invalid" by the PM core which will refuse to handle
> > it from that point on (in particualr, suspend/hibernation will not
> > be started if there is an "invalid" device in the system).
>
> s/particualr,/particular

Yes, thanks.

> So drivers can never validly fail to resume. That sounds fair enough. If
> the hardware has gone away while in lower power mode (USB, say), should
> the driver then just printk an error and return success?

I think so.

IMO, an error code returned by a driver's ->resume() should mean "the device
hasn't resumed and is presumably dead". Otherwise, ->resume() should return
success.

> > The main purpose of doing this is to separate suspend (aka S2RAM and
> > standby) callbacks from hibernation callbacks in such a way that the
> > new callbacks won't take arguments and the semantics of each of them
> > will be clearly specified. This has been requested for multiple
> > times by many people, including Linus himself, and the reason is that
> > within the current scheme if ->resume() is called, for example, it's
> > difficult to say why it's been called (ie. is it a resume from RAM or
> > from hibernation or a suspend/hibernation failure etc.?).
> >
> > The second purpose is to make the suspend/hibernation callbacks more
> > flexible so that device drivers can handle more than they can within
> > the current scheme. For example, some drivers may need to prevent
> > new children of the device from being registered before their
> > ->suspend() callbacks are executed or they may want to carry out some
> > operations requiring the availability of some other devices, not
> > directly bound via the parent-child relationship, in order to prepare
> > for the execution of ->suspend(), etc.
>
> Do these changes allow for other power state possibilities besides
> suspend to ram and hibernate (eg on other platforms)?

The other states fall into the "suspend" category.

> > Ultimately, we'd like to stop using the freezing of tasks for suspend
> > and therefore the drivers' suspend/hibernation code will have to take
> > care of the handling of the user space during suspend/hibernation.
> > That, in turn, would be difficult within the current scheme, without
> > the new ->prepare() and ->complete() callbacks.
> >
> > Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
> > ---
> >
> > arch/x86/kernel/apm_32.c | 4
> > drivers/base/power/main.c | 706 ++++++++++++++++++++++++++++++++++-----------
> > drivers/base/power/power.h | 2
> > drivers/base/power/trace.c | 4
> > include/linux/device.h | 9
> > include/linux/pm.h | 318 ++++++++++++++++++--
> > kernel/power/disk.c | 20 -
> > kernel/power/main.c | 6
> > 8 files changed, 870 insertions(+), 199 deletions(-)
> >
> > Index: linux-2.6/include/linux/pm.h
> > ===================================================================
> > --- linux-2.6.orig/include/linux/pm.h
> > +++ linux-2.6/include/linux/pm.h
> > @@ -114,7 +114,9 @@ typedef struct pm_message {
> > int event;
> > } pm_message_t;
> >
> > -/*
> > +/**
> > + * struct pm_ops - device PM callbacks
> > + *
> > * Several driver power state transitions are externally visible, affecting
> > * the state of pending I/O queues and (for drivers that touch hardware)
> > * interrupts, wakeups, DMA, and other hardware state. There may also be
> > @@ -122,6 +124,288 @@ typedef struct pm_message {
> > * to the rest of the driver stack (such as a driver that's ON gating off
> > * clocks which are not in active use).
> > *
> > + * The externally visible transitions are handled with the help of the following
> > + * callbacks included in this structure:
> > + *
> > + * @prepare: Prepare the device for the upcoming transition, but do NOT change
> > + * its hardware state. Prevent new children of the device from being
> > + * registered after @prepare() returns (the driver's subsystem and
> > + * generally the rest of the kernel is supposed to prevent new calls to the
> > + * probe method from being made too once @prepare() has succeeded). If
> > + * @prepare() detects a situation it cannot handle (e.g. registration of a
> > + * child already in progress), it may return -EAGAIN, so that the PM core
> > + * can execute it once again (e.g. after the new child has been registered)
> > + * to recover from the race condition. This method is executed for all
> > + * kinds of suspend transitions and is followed by one of the suspend
> > + * callbacks: @suspend(), @freeze(), or @poweroff().
> > + * The PM core executes @prepare() for all devices before starting to
> > + * execute suspend callbacks for any of them, so drivers may assume all of
> > + * the other devices to be present and functional while @prepare() is being
> > + * executed. In particular, it is safe to make GFP_KERNEL memory
> > + * allocations from within @prepare(), although they are likely to fail in
> > + * case of hibernation, if a substantial amount of memory is requested.
>
> Why?

Hmm, you're right. This is the other way around - if a device allocates too
much RAM, we won't have enough memory to create the image.

> > + * However, drivers may NOT assume anything about the availability of the
> > + * user space at that time and it is not correct to request firmware from
> > + * within @prepare() (it's too late to do that).
>
> That doesn't sound good. It would be good to be able to get drivers to
> request firmware early in the process.

That will be possible when we drop the freezer.

> > + * @complete: Undo the changes made by @prepare(). This method is executed for
> > + * all kinds of resume transitions, following one of the resume callbacks:
> > + * @resume(), @thaw(), @restore(). Also called if the state transition
> > + * fails before the driver's suspend callback (@suspend(), @freeze(),
> > + * @poweroff()) can be executed (e.g. if the suspend callback fails for one
> > + * of the other devices that the PM core has unsucessfully attempted to
>
> s/unsucessfully/unsuccessfully

Thanks, will fix.

Rafael
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2008-04-01 22:15    [W:0.076 / U:0.228 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site