Messages in this thread | | | Date | Tue, 4 Mar 2008 08:16:49 +0000 (GMT) | From | Dave Airlie <> | Subject | Re: 2.6.25-rc3 + RS690 + DRM + xf86-video-ati hang |
| |
On Mon, 3 Mar 2008, Andrew Morton wrote:
> On Sat, 1 Mar 2008 19:35:11 +0000 Jonathan McDowell <noodles@earth.li> wrote: > > > If I enable CONFIG_DRM_RADEON under 2.6.25-rc3 then starting up > > X using the xf86-video-ati driver (6.8.0 or latest git) causes the > > machine to become unresponsive; while it still pings and will accept > > incoming connections they never actually complete and it's not possible > > to login over a serial console (the actual video console doesn't display > > anything and the monitor reports a loss of sync). > > > > Disabling the kernel DRM option results in X running successfully. > > Likewise 2.6.24 works fine with DRM enabled, presumably because the > > support for the RS690 was only added in 2.6.25-rc > > > > The last messages from the kernel before it becomes unresponsive are: > > > > [drm] Setting GART location based on new memory map > > [drm] Loading R300 Microcode > > [drm] writeback test succeeded in 1 usecs > > > > The motherboard in question is an ASUS M2A-VM HDMI, with the analog VGA > > output being used. The machine is running an AMD64 with Debian unstable. > > I have put the output of lspci, a non drm Xorg.log and a drm Xorg.log > > at: > > > > http://the.earth.li/~noodles/xorg-ati-drm/lspci > > http://the.earth.li/~noodles/xorg-ati-drm/Xorg.0.log-nodrm > > http://the.earth.li/~noodles/xorg-ati-drm/Xorg.0.log-drm > > > > If I can provide any more useful information please let me know. > > > > Did 2.6.24 work OK with all the same userspace software? >
We haven't actually released any userspace software properly yet, its all experimental at this point until we debug the hardware some more..
Dave.
| |