Messages in this thread | | | Date | Mon, 31 Mar 2008 09:30:49 +0530 | From | "Sanjeev Aditya Naga" <> | Subject | Re: [>=2.6.23][BUG] Oops on power disconnection |
| |
Hi,
Please find the dmesg below: BTW, I tried basically with kernels after 2.6.21 and I get the same result.
Kind Regards, Sanjeev
Initializing cgroup subsys cpuset Linux version 2.6.24.3 (root@draksha.cultuzz.in) (gcc version 4.3.0 20080222 (Red Hat 4.3.0-0.11) (GCC) ) #5 SMP Tue Apr 1 00:04:55 IST 2008 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009dc00 (usable) BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000ce000 - 00000000000d0000 (reserved) BIOS-e820: 00000000000dc000 - 00000000000e0000 (reserved) BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 0000000057e80000 (usable) BIOS-e820: 0000000057e80000 - 0000000057e96000 (ACPI data) BIOS-e820: 0000000057e96000 - 0000000057f00000 (ACPI NVS) BIOS-e820: 0000000057f00000 - 0000000058000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) 510MB HIGHMEM available. 896MB LOWMEM available. found SMP MP-table at 000f7130 Using x86 segment limits to approximate NX protection Entering add_active_range(0, 0, 360064) 0 entries of 256 used Zone PFN ranges: DMA 0 -> 4096 Normal 4096 -> 229376 HighMem 229376 -> 360064 Movable zone start PFN for each node early_node_map[1] active PFN ranges 0: 0 -> 360064 On node 0 totalpages: 360064 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 4064 pages, LIFO batch:0 Normal zone: 1760 pages used for memmap Normal zone: 223520 pages, LIFO batch:31 HighMem zone: 1021 pages used for memmap HighMem zone: 129667 pages, LIFO batch:31 Movable zone: 0 pages used for memmap DMI present. Using APIC driver default ACPI: RSDP 000F7070, 0014 (r0 TOSQCI) ACPI: RSDT 57E8F4EF, 0038 (r1 TOSQCI TOSQCI00 6040000 LTP 0) ACPI: FACP 57E95D7C, 0074 (r1 ATI Bonefish 6040000 ATI F4240) ACPI: DSDT 57E8FF4C, 5E30 (r1 TOSQCI L10 6040000 MSFT 2000002) ACPI: FACS 57E96FC0, 0040 ACPI: APIC 57E95DF0, 005E (r1 PTLTD APIC 6040000 LTP 0) ACPI: MCFG 57E95E4E, 003C (r1 PTLTD MCFG 6040000 LTP 0) ACPI: SLIC 57E95E8A, 0176 (r1 TOSQCI TOSQCI00 6040000 LTP 0) ACPI: SSDT 57E8F527, 0535 (r1 PmRef CpuPm 3000 INTL 20050228) ACPI: DMI detected: Toshiba ATI board detected. Disabling timer routing over 8254. ACPI: PM-Timer IO Port: 0x8008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 6:14 APIC version 20 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) Processor #1 6:14 APIC version 20 ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level) Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 60000000 (gap: 58000000:88000000) swsusp: Registered nosave memory region: 000000000009d000 - 000000000009e000 swsusp: Registered nosave memory region: 000000000009e000 - 00000000000a0000 swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000ce000 swsusp: Registered nosave memory region: 00000000000ce000 - 00000000000d0000 swsusp: Registered nosave memory region: 00000000000d0000 - 00000000000dc000 swsusp: Registered nosave memory region: 00000000000dc000 - 00000000000e0000 swsusp: Registered nosave memory region: 00000000000e0000 - 00000000000e4000 swsusp: Registered nosave memory region: 00000000000e4000 - 0000000000100000 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 357251 Kernel command line: ro root=LABEL=/1 rhgb quiet mapped APIC to ffffb000 (fee00000) mapped IOAPIC to ffffa000 (fec00000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 CPU 0 irqstacks, hard=c07bd000 soft=c079d000 PID hash table entries: 4096 (order: 12, 16384 bytes) Detected 1600.026 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 1419592k/1440256k available (2263k kernel code, 19312k reserved, 1109k data, 292k init, 522752k highmem) virtual kernel memory layout: fixmap : 0xffc52000 - 0xfffff000 (3764 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) .init : 0xc0751000 - 0xc079a000 ( 292 kB) .data : 0xc0635db8 - 0xc074b56c (1109 kB) .text : 0xc0400000 - 0xc0635db8 (2263 kB) Checking if this processor honours the WP bit even in supervisor mode... Ok. SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1 Calibrating delay using timer specific routine.. 3202.37 BogoMIPS (lpj=1601186) Security Framework initialized SELinux: Initializing. SELinux: Starting in permissive mode selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 512 Initializing cgroup subsys ns Initializing cgroup subsys cpuacct CPU: After generic identify, caps: bfe9fbff 00000000 00000000 00000000 0000c189 00000000 00000000 00000000 monitor/mwait feature present. using mwait in idle threads. CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 1024K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU: After all inits, caps: bfe9f3ff 00000000 00000000 00002940 0000c189 00000000 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Compat vDSO mapped to ffffe000. Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code Early unpacking initramfs... done ACPI: Core revision 20070126 ACPI: Looking for DSDT in initramfs... successfully read 21669 bytes from /DSDT.aml. ACPI: Table DSDT replaced by host OS ACPI: DSDT 00000000, 54A5 (r1 TOSQCI L10 6040000 INTL 20061109) ACPI: DSDT override uses original SSDTs unless "acpi_no_auto_ssdt"CPU0: Intel Genuine Intel(R) CPU T2060 @ 1.60GHz stepping 0c SMP alternatives: switching to SMP code Booting processor 1/1 eip 3000 CPU 1 irqstacks, hard=c07be000 soft=c079e000 Initializing CPU#1 Calibrating delay using timer specific routine.. 3199.52 BogoMIPS (lpj=1599764) CPU: After generic identify, caps: bfe9fbff 00000000 00000000 00000000 0000c189 00000000 00000000 00000000 monitor/mwait feature present. CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 1024K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU: After all inits, caps: bfe9f3ff 00000000 00000000 00002940 0000c189 00000000 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. CPU1: Intel Genuine Intel(R) CPU T2060 @ 1.60GHz stepping 0c Total of 2 processors activated (6401.90 BogoMIPS). ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1 checking TSC synchronization [CPU#0 -> CPU#1]: passed. Brought up 2 CPUs sizeof(vma)=84 bytes sizeof(page)=32 bytes sizeof(inode)=336 bytes sizeof(dentry)=132 bytes sizeof(ext3inode)=488 bytes sizeof(buffer_head)=56 bytes sizeof(skbuff)=176 bytes sizeof(task_struct)=1680 bytes CPU0 attaching sched-domain: domain 0: span 00000003 groups: 00000001 00000002 CPU1 attaching sched-domain: domain 0: span 00000003 groups: 00000002 00000001 net_namespace: 64 bytes Booting paravirtualized kernel on bare hardware Time: 2:11:42 Date: 04/02/08 NET: Registered protocol family 16 No dock devices found. ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xfd494, last bus=14 PCI: Using configuration type 1 Setting up standard PCI resources ACPI: EC: Look up EC in DSDT ACPI Error (dswload-0664): [\___] Namespace lookup failure, AE_NOT_FOUND ACPI Exception (psloop-0225): AE_NOT_FOUND, During name lookup/catalog [20070126] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._INI] (Node f781a6c0), AE_NOT_FOUND ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: EC: GPE = 0x10, I/O: command/status = 0x66, data = 0x62 ACPI: EC: driver started in poll mode ACPI: EC: non-query interrupt received, switching to interrupt mode ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Transparent bridge - 0000:00:14.4 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11) *0, disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 10 devices ACPI: ACPI bus type pnp unregistered usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default Time: tsc clocksource has been installed. system 00:01: iomem range 0xe0000000-0xefffffff could not be reserved system 00:08: ioport range 0x1080-0x1080 has been reserved system 00:08: ioport range 0x200-0x20f has been reserved system 00:08: ioport range 0x40b-0x40b has been reserved system 00:08: ioport range 0x4d0-0x4d1 has been reserved system 00:08: ioport range 0x4d6-0x4d6 has been reserved system 00:08: ioport range 0x530-0x537 has been reserved system 00:08: ioport range 0xc00-0xc01 has been reserved system 00:08: ioport range 0xc14-0xc14 has been reserved system 00:08: ioport range 0xc50-0xc52 has been reserved system 00:08: ioport range 0xc6c-0xc6c has been reserved system 00:08: ioport range 0xc6f-0xc6f has been reserved system 00:08: ioport range 0xcd4-0xcd5 has been reserved system 00:08: ioport range 0xcd6-0xcd7 has been reserved system 00:08: ioport range 0xcd8-0xcdf has been reserved system 00:08: ioport range 0x8000-0x805f could not be reserved system 00:08: ioport range 0x8210-0x821f has been reserved system 00:08: ioport range 0xf40-0xf47 has been reserved system 00:08: ioport range 0x280-0x293 has been reserved system 00:08: ioport range 0x87f-0x87f has been reserved system 00:09: iomem range 0xe0000-0xfffff could not be reserved system 00:09: iomem range 0xfff00000-0xffffffff could not be reserved system 00:09: iomem range 0xc0004800-0xc00057ff has been reserved system 00:09: iomem range 0x0-0xfff could not be reserved PCI: Bridge: 0000:00:01.0 IO window: 9000-9fff MEM window: c0000000-c00fffff PREFETCH window: d0000000-dfffffff PCI: Bus 10, cardbus bridge: 0000:09:01.0 IO window: 0000a400-0000a4ff IO window: 0000a800-0000a8ff PREFETCH window: 64000000-67ffffff MEM window: 68000000-6bffffff PCI: Bridge: 0000:00:14.4 IO window: a000-afff MEM window: c0100000-c01fffff PREFETCH window: disabled. PCI: Enabling device 0000:09:01.0 (0000 -> 0003) ACPI: PCI Interrupt 0000:09:01.0[A] -> GSI 20 (level, low) -> IRQ 16 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered checking if image is initramfs... it is Freeing initrd memory: 2639k freed apm: BIOS not found. audit: initializing netlink socket (disabled) audit(1207102301.744:1): initialized highmem bounce pool size: 64 pages Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) SELinux: Registering netfilter hooks ksign: Installing public key data Loading keyring Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) Boot video device is 0000:01:05.0 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 ACPI: SSDT 57E8FCDD, 01E8 (r1 PmRef Cpu0Ist 3000 INTL 20050228) ACPI: SSDT 57E8FA5C, 01FC (r1 PmRef Cpu0Cst 3001 INTL 20050228) ACPI: Processor [CPU0] (supports 8 throttling states) ACPI: SSDT 57E8FEC5, 0087 (r1 PmRef Cpu1Ist 3000 INTL 20050228) ACPI: SSDT 57E8FC58, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20050228) ACPI: Processor [CPU1] (supports 8 throttling states) ACPI: Thermal Zone [THRM] (60 C) isapnp: Scanning for PnP cards... Switched to high resolution mode on CPU 0 Switched to high resolution mode on CPU 1 isapnp: No Plug & Play device found Real Time Clock Driver v1.12ac Non-volatile memory driver v1.2 Linux agpgart interface v0.102 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize input: Macintosh mouse button emulation as /class/input/input0 Yenta: CardBus bridge found at 0000:09:01.0 [1179:ff31] Yenta: Using CSCINT to route CSC interrupts to PCI Yenta: Routing CardBus interrupts to PCI Yenta TI: socket 0000:09:01.0, mfunc 0x00001002, devctl 0x44 Yenta: ISA IRQ mask 0x0cf8, PCI irq 16 Socket status: 30000006 pcmcia: parent PCI bridge I/O window: 0xa000 - 0xafff cs: IO port probe 0xa000-0xafff: clean. pcmcia: parent PCI bridge Memory window: 0xc0100000 - 0xc01fffff PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard as /class/input/input1 cpuidle: using governor ladder cpuidle: using governor menu usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 Using IPI No-Shortcut mode registered taskstats version 1 Magic number: 4:959:155 Freeing unused kernel memory: 292k freed Write protecting the kernel read-only data: 880k ACPI: PCI Interrupt 0000:00:13.2[A] -> GSI 19 (level, low) -> IRQ 17 ehci_hcd 0000:00:13.2: EHCI Host Controller ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:13.2: irq 17, io mem 0xc0406000 ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 19 (level, low) -> IRQ 17 ohci_hcd 0000:00:13.0: OHCI Host Controller ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:13.0: irq 17, io mem 0xc0404000 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 4 ports detected ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 19 (level, low) -> IRQ 17 ohci_hcd 0000:00:13.1: OHCI Host Controller ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3 ohci_hcd 0000:00:13.1: irq 17, io mem 0xc0405000 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 4 ports detected Synaptics Touchpad, model: 1, fw: 6.2, id: 0x25a0b1, caps: 0xa04713/0x0 synaptics: Toshiba Satellite L35 detected, limiting rate to 40pps. input: SynPS/2 Synaptics TouchPad as /class/input/input2 USB Universal Host Controller Interface driver v3.0 SCSI subsystem initialized Driver 'sd' needs updating - please use bus_type methods libata version 3.00 loaded. sata_sil 0000:00:12.0: version 2.3 PCI: Enabling device 0000:00:12.0 (0005 -> 0007) ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 22 (level, low) -> IRQ 18 scsi0 : sata_sil scsi1 : sata_sil ata1: SATA max UDMA/100 mmio m512@0xc0407000 tf 0xc0407080 irq 18 ata2: SATA max UDMA/100 mmio m512@0xc0407000 tf 0xc04070c0 irq 18 ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ATA-7: TOSHIBA MK8037GSX, DL230M, max UDMA/100 ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/32) ata1.00: configured for UDMA/100 ata2: SATA link down (SStatus 0 SControl 300) scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK8037GS DL23 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sda4 sd 0:0:0:0: [sda] Attached SCSI disk ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:14.1 to 64 ACPI: PCI interrupt for device 0000:00:14.1 disabled ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 19 scsi2 : pata_atiixp scsi3 : pata_atiixp ata3: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x8460 irq 14 ata4: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x8468 irq 15 ata3: port disabled. ignoring. ata4.00: ATAPI: MATSHITADVD-RAM UJ-850S, 1.10, max UDMA/33 ata4.00: configured for UDMA/33 scsi 3:0:0:0: CD-ROM MATSHITA DVD-RAM UJ-850S 1.10 PQ: 0 ANSI: 5 EXT3-fs: INFO: recovery required on readonly filesystem. EXT3-fs: write access will be enabled during recovery. kjournald starting. Commit interval 5 seconds EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. SELinux: Disabled at runtime. SELinux: Unregistering netfilter hooks audit(1207102314.976:2): selinux=0 auid=4294967295 sd 0:0:0:0: Attached scsi generic sg0 type 0 scsi 3:0:0:0: Attached scsi generic sg1 type 5 piix4_smbus 0000:00:14.0: Found 0000:00:14.0 device input: PC Speaker as /class/input/input3 cs: IO port probe 0x100-0x3af: clean. cs: IO port probe 0x3e0-0x4ff: clean. cs: IO port probe 0x820-0x8ff: clean. cs: IO port probe 0xc00-0xcf7: clean. cs: IO port probe 0xa00-0xaff: clean. ACPI: Battery Slot [BAT1] (battery present) ACPI: AC Adapter [ACAD] (on-line) input: Video Bus as /class/input/input4 ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) 8139too Fast Ethernet driver 0.9.28 ACPI: PCI Interrupt 0000:09:02.0[A] -> GSI 21 (level, low) -> IRQ 21 eth0: RealTek RTL8139 at 0xf8918000, 00:1b:24:1e:9a:57, IRQ 21 eth0: Identified 8139 chip type 'RTL-8100B/8139D' input: Power Button (FF) as /class/input/input5 ACPI: Power Button (FF) [PWRF] input: Lid Switch as /class/input/input6 ACPI: Lid Switch [LID] input: Power Button (CM) as /class/input/input7 ACPI: Power Button (CM) [PWRB] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) Driver 'sr' needs updating - please use bus_type methods sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 3:0:0:0: Attached scsi CD-ROM sr0 ACPI: PCI Interrupt 0000:00:14.2[A] -> GSI 16 (level, low) -> IRQ 19 ALSA sound/pci/hda/hda_intel.c:732: codec_mask = 0xb ALSA sound/pci/hda/hda_codec.c:2137: hda_codec: model '3stack' is selected ALSA sound/pci/hda/patch_si3054.c:238: si3054: cannot initialize. EXT MID = 0000 ALSA sound/pci/hda/patch_si3054.c:250: Link Frame Detect(FDT) is not ready (line status: 0000) NET: Registered protocol family 10 lo: Disabled Privacy Extensions device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com device-mapper: multipath: version 1.0.5 loaded loop: module loaded EXT3 FS on sda4, internal journal fuse init (API version 7.9) Adding 3116600k swap on /dev/sda3. Priority:-1 extents:1 across:3116600k IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk> ip_tables: (C) 2000-2006 Netfilter Core Team nf_conntrack version 0.5.0 (16384 buckets, 65536 max) openser[1699]: segfault at 00000009 eip 0045a625 esp bf9347fc error 4 Bridge firewalling registered virbr0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature. virbr0: starting userspace STP failed, starting kernel STP virbr0: no IPv6 routers present kjournald starting. Commit interval 5 seconds EXT3-fs warning: maximal mount count reached, running e2fsck is recommended EXT3 FS on dm-0, internal journal EXT3-fs: mounted filesystem with ordered data mode. hda-intel: Invalid position buffer, using LPIB read method instead. eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 eth0: no IPv6 routers present WARNING: at lib/kref.c:33 kref_get() (Not tainted) Pid: 69, comm: kacpi_notify Not tainted 2.6.24.3 #5 [<c04ff274>] kref_get+0x3d/0x45 [<c04fe65d>] kobject_get+0xf/0x13 [<c04fe84d>] kobject_add+0x82/0x176 [<c04fe9eb>] kobject_register+0x19/0x2d [<c05b0ad0>] cpuidle_add_state_sysfs+0x7b/0xe4 [<c052660e>] acpi_os_execute_notify+0x0/0x2b [<c05b03fd>] cpuidle_enable_device+0x31/0x9b [<c0545923>] acpi_processor_cst_has_changed+0x40/0x55 [<c0543ae2>] acpi_processor_notify+0x8b/0xf4 [<c052bcbb>] acpi_ev_notify_dispatch+0x4c/0x55 [<c0526630>] acpi_os_execute_notify+0x22/0x2b [<c052660e>] acpi_os_execute_notify+0x0/0x2b [<c043c212>] run_workqueue+0x7d/0x107 [<c043fa5b>] prepare_to_wait+0x28/0x45 [<c043c35a>] worker_thread+0xbe/0xca [<c043f8ff>] autoremove_wake_function+0x0/0x35 [<c043c29c>] worker_thread+0x0/0xca [<c043f679>] kthread+0x38/0x5d [<c043f641>] kthread+0x0/0x5d [<c0406477>] kernel_thread_helper+0x7/0x10 ======================= BUG: unable to handle kernel NULL pointer dereference at virtual address 00000020 printing eip: c04c4716 *pde = 578c2067 Oops: 0000 [#1] SMP Modules linked in: cbc(U) geode_aes(U) blkcipher(U) aes_i586(U) aes_generic(U) dm_crypt(U) ipt_MASQUERADE(U) iptable_nat(U) nf_nat(U) bridge(U) autofs4(U) nf_conntrack_ipv4(U) xt_state(U) nf_conntrack(U) xt_tcpudp(U) ipt_REJECT(U) iptable_filter(U) ip_tables(U) x_tables(U) cpufreq_ondemand(U) acpi_cpufreq(U) fuse(U) loop(U) dm_mirror(U) dm_multipath(U) dm_mod(U) ipv6(U) snd_hda_intel(U) snd_seq_dummy(U) snd_seq_oss(U) snd_seq_midi_event(U) snd_seq(U) snd_seq_device(U) snd_pcm_oss(U) sr_mod(U) snd_mixer_oss(U) snd_pcm(U) 8139cp(U) snd_timer(U) button(U) 8139too(U) mii(U) snd_page_alloc(U) cdrom(U) video(U) output(U) snd_hwdep(U) ac(U) snd(U) pcspkr(U) i2c_piix4(U) i2c_core(U) battery(U) joydev(U) soundcore(U) sg(U) pata_atiixp(U) pata_acpi(U) sata_sil(U) ata_generic(U) libata(U) sd_mod(U) scsi_mod(U) ext3(U) jbd(U) mbcache(U) uhci_hcd(U) ohci_hcd(U) ehci_hcd(U)
Pid: 69, comm: kacpi_notify Not tainted (2.6.24.3 #5) EIP: 0060:[<c04c4716>] EFLAGS: 00010246 CPU: 0 EIP is at sysfs_addrm_start+0x21/0x81 EAX: c04c47d7 EBX: 00000000 ECX: 00000000 EDX: f78b8000 ESI: f78b8eb8 EDI: f78b8ec8 EBP: 00000000 ESP: f78b8ea4 DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 Process kacpi_notify (pid: 69, ti=f78b8000 task=f78d8000 task.ti=f78b8000) Stack: f229ff54 f229ff54 f5b8d390 fffffff4 c04c4b45 00000000 00000000 00000000 00000000 f229ff54 00000000 00000000 f782601c c04c4bab f78b8ee0 c04fe65d f229ff54 c04fe8a8 f722e67f ffffffff ffffffff 00000007 f722e678 f78261d8 Call Trace: [<c04c4b45>] create_dir+0x33/0x6c [<c04c4bab>] sysfs_create_dir+0x2d/0x40 [<c04fe65d>] kobject_get+0xf/0x13 [<c04fe8a8>] kobject_add+0xdd/0x176 [<c04fe9eb>] kobject_register+0x19/0x2d [<c05b0ad0>] cpuidle_add_state_sysfs+0x7b/0xe4 [<c052660e>] acpi_os_execute_notify+0x0/0x2b [<c05b03fd>] cpuidle_enable_device+0x31/0x9b [<c0545923>] acpi_processor_cst_has_changed+0x40/0x55 [<c0543ae2>] acpi_processor_notify+0x8b/0xf4 [<c052bcbb>] acpi_ev_notify_dispatch+0x4c/0x55 [<c0526630>] acpi_os_execute_notify+0x22/0x2b [<c052660e>] acpi_os_execute_notify+0x0/0x2b [<c043c212>] run_workqueue+0x7d/0x107 [<c043fa5b>] prepare_to_wait+0x28/0x45 [<c043c35a>] worker_thread+0xbe/0xca [<c043f8ff>] autoremove_wake_function+0x0/0x35 [<c043c29c>] worker_thread+0x0/0xca [<c043f679>] kthread+0x38/0x5d [<c043f641>] kthread+0x0/0x5d [<c0406477>] kernel_thread_helper+0x7/0x10 ======================= Code: c0 89 31 83 c4 14 5b 5e 5f c3 57 b9 04 00 00 00 56 89 c7 53 89 c6 83 ec 04 89 d3 31 c0 f3 ab b8 90 3f 72 c0 89 16 e8 6a cf 16 00 <8b> 53 20 b9 ec 42 4c c0 a1 84 e4 83 c0 89 1c 24 e8 44 6e fd ff EIP: [<c04c4716>] sysfs_addrm_start+0x21/0x81 SS:ESP 0068:f78b8ea4 ---[ end trace 863306c7f7bb36f7 ]--- atkbd.c: Unknown key pressed (translated set 2, code 0x55 on isa0060/serio0). atkbd.c: Use 'setkeycodes 55 <keycode>' to make it known. atkbd.c: Unknown key released (translated set 2, code 0x55 on isa0060/serio0). atkbd.c: Use 'setkeycodes 55 <keycode>' to make it known.
| |