lkml.org 
[lkml]   [2008]   [Mar]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: blktrace/relay/s390: Oops in subbuf_splice_actor
On Fri, Mar 14 2008, Christof Schmitt wrote:
> On Fri, Mar 14, 2008 at 08:21:03AM -0700, David Wilder wrote:
> > Christof Schmitt wrote:
> > >On Fri, Mar 14, 2008 at 02:10:07PM +0100, Jens Axboe wrote:
> > >>On Fri, Mar 14 2008, Christof Schmitt wrote:
> > >>>On Fri, Mar 14, 2008 at 12:58:03PM +0100, Jens Axboe wrote:
> > >>>>That is indeed a bug, does this work for you?
> > >>>>
> > >>>>diff --git a/kernel/relay.c b/kernel/relay.c
> > >>>>index d080b9d..39d1fa8 100644
> > >>>>--- a/kernel/relay.c
> > >>>>+++ b/kernel/relay.c
> > >>>>@@ -1066,7 +1066,7 @@ static int subbuf_splice_actor(struct file *in,
> > >>>> unsigned int flags,
> > >>>> int *nonpad_ret)
> > >>>> {
> > >>>>- unsigned int pidx, poff, total_len, subbuf_pages, ret;
> > >>>>+ unsigned int pidx, poff, total_len, subbuf_pages, nr_pages, ret;
> > >>>> struct rchan_buf *rbuf = in->private_data;
> > >>>> unsigned int subbuf_size = rbuf->chan->subbuf_size;
> > >>>> uint64_t pos = (uint64_t) *ppos;
> > >>>>@@ -1098,7 +1098,9 @@ static int subbuf_splice_actor(struct file *in,
> > >>>> pidx = (read_start / PAGE_SIZE) % subbuf_pages;
> > >>>> poff = read_start & ~PAGE_MASK;
> > >>>>
> > >>>>- for (total_len = 0; spd.nr_pages < subbuf_pages; spd.nr_pages++) {
> > >>>>+ nr_pages = min_t(unsigned int, subbuf_pages, PIPE_BUFFERS);
> > >>>>+
> > >>>>+ for (total_len = 0; spd.nr_pages < nr_pages; spd.nr_pages++) {
> > >>>> unsigned int this_len, this_end, private;
> > >>>> unsigned int cur_pos = read_start + total_len;
> > >>>With the patch, i can run dd and 'blktrace -h traceserver' without the
> > >>>oops. But the output from blktrace only contains only zeros and no
> > >>>usable data for blkparse. Using blktrace to write the data directly to
> > >>>disk, without using the blktrace server works. Is there anything i
> > >>>should look for to help debugging the problem?
> > >>We should probably get Tom in the loop, as he is the relay expert. I'll
> > >>make sure the above patch gets into 2.6.25, as it is definitely a bug
> > >>that needs fixing.
> > >
> > >http://relayfs.sourceforge.net/contact.html mentions Tom Zanussi, but
> > >his email address seems to be no longer valid. I copy Dave Wilder
> > >here, since he is mentioned as relay maintainer on the web page.
> > >
> > >Dave, can you have a look at this? I can easily reproduce the problem
> > >on s390 Linux for testing and getting more debug information.
> > >
> > >Christof
> > >--
> > >To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> > >the body of a message to majordomo@vger.kernel.org
> > >More majordomo info at http://vger.kernel.org/majordomo-info.html
> > >Please read the FAQ at http://www.tux.org/lkml/
> > >
> >
> > I will take a look at the problem.
> > Any thing special about the test you are running I need to know?
>
> The test is about using the blktrace network feature on a 64 bit s390
> guest on z/VM. I don't know if 64 bit and z/VM are related to the
> problem scenario, it is the only setup i tested. To reproduce, start
> somewhere 'blktrace -l' as a server and issue
> blktrace -h tracehostname
> dd if=/dev/sda of=/dev/null
> to start blktrace and some I/O load.

If the problem is in the splice part of relay, then the problem will
likely go away if you add the -s parameter to blktrace. Might be handy
to know if you are experimenting.

--
Jens Axboe



\
 
 \ /
  Last update: 2008-03-17 09:11    [W:0.055 / U:0.392 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site