Messages in this thread | | | Date | Mon, 25 Feb 2008 18:40:51 -0500 | From | Jeff Garzik <> | Subject | Re: Sata-MV, Intergated Sata Device Support |
| |
Jon Li wrote: > Hello, > > I am curious as to whether there are plans to add support for integrated > sata devices. I personally want to add support for a 60x1C0 based > device (pci:id = 0x5182). I think adding support should be relatively > simple, except for a few issues outlined below. > > In the original mvSata.c (ver3.4) that has 0x5182 support, the config > space is as such: > > case MV_SATA_DEVICE_ID_5182: > pAdapter->numberOfChannels = MV_SATA_5182_PORT_NUM; > pAdapter->numberOfUnits = 1; > pAdapter->portsPerUnit = 2; > pAdapter->sataAdapterGeneration = MV_SATA_GEN_IIE; > /*The integrated sata core chip based on 60x1 C0*/ > pAdapter->chipIs60X1C0 = MV_TRUE; > pAdapter->hostInterface = MV_HOST_IF_INTEGRATED; > pAdapter->mainMaskOffset = 0x20024; /*the iobaseaddress is > 0x60000*/ > pAdapter->mainCauseOffset = 0x20020; > break; > > I have not yet figured out how all these values are defined in sata-mv.c > (ver 0.8). Specifically, where do I define "numberOfChannels" which > should equal 2, and "numberOfUnits" which obviously equals 1? > > I have a current config space (not completed) for sata-mv.c which is: > > { /* chip_5182 */ > .sht = &mv_sht, > .flags = (MV_COMMON_FLAGS | MV_6XXX_FLAGS | > MV_FLAG_DUAL_HC), > .pio_mask = 0x1f, /* pio0-4 */ > .udma_mask = 0x7f, /* udma0-6 */ > .port_ops = &mv6_ops, > }, > > I believe according to the new structure in sata-mv.c, > HC_MAIN_IRQ_CAUSE_OFS should equal 0x20020 and HC_MAIN_IRQ_MASK_OFS > should equal 0x20024 for the 0x5182 device. > > My final question is how to implement the MV_HOST_IF_INTEGRATED flag? > Is this already implemented and renamed in sata-mv.c? Or do I need to > also add the routines?
I just wanted to point the current sata_mv hackers to this message from April 2007...
Jeff
| |