lkml.org 
[lkml]   [2008]   [Feb]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: New 2.6.24.2 SG_IO SCSI problems
From
Date
On Thu, 2008-02-21 at 10:15 -0500, Mark Hounschell wrote:
> I seem to have run into some sort of regression in the SG_IO interface of 2.6.24.2.
> I have an application that up until 2.6.24 worked fine. The 2.6.23.16 kernel works fine.
>
> During reads I get these kernel messages. Writes and other functions _seem_ OK. Actually basic
> reads are working. Its with large BC reads using an io_vec list that the problem shows up.
>
> Feb 21 09:27:51 harley kernel: (scsi1:A:2:0): data overrun detected in Data-in phase. Tag == 0x1.
> Feb 21 09:27:51 harley kernel: (scsi1:A:2:0): Have seen Data Phase. Length = 256. NumSGs = 1.
> Feb 21 09:27:51 harley kernel: sg[0] - Addr 0x06256100 : Length 256

Help me a little here. What was the io_vec and command you sent in to
produce this? The aic debugging information implies a single element sg
list for a 256 byte read.

James




\
 
 \ /
  Last update: 2008-02-21 16:43    [W:0.061 / U:0.240 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site