lkml.org 
[lkml]   [2008]   [Dec]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: Sil 3132 SATA II express card
on 12/25/2008 04:27 AM Parag Warudkar wrote the following:
> Thanasis <thanasis <at> asyr.hopto.org> writes:
>
>> I have compiled in kernel (2.6.27) support for Sil 3132:
>> CONFIG_SATA_SIL24=y
>>
>> When I insert the card in the laptop's slot, dmesg shows nothing new.
>> Is this normal?
>>
>
> Last time I tried that I had to modprobe the pcie hotplug module
> (pciehp?) before inserting the card and even then it only worked some
> times.
>
> If you boot with the card plugged in that should work - I haven't
> tried lately but pciehp was flaky on my hardware (MacBook Pro).
>

That is exactly what happens to my hw too. :-\

System Information
Manufacturer: Gateway
Product Name: T-1625


# grep -i hotplug .config
CONFIG_HOTPLUG=y
# Memory hotplug is currently incompatible with Software Suspend
CONFIG_HOTPLUG_CPU=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ACPI_HOTPLUG_CPU=y
CONFIG_HOTPLUG_PCI_PCIE=m
CONFIG_HOTPLUG_PCI=y
# CONFIG_HOTPLUG_PCI_FAKE is not set
CONFIG_HOTPLUG_PCI_ACPI=y
# CONFIG_HOTPLUG_PCI_ACPI_IBM is not set
# CONFIG_HOTPLUG_PCI_CPCI is not set
CONFIG_HOTPLUG_PCI_SHPC=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"


# lsmod |grep pci
pciehp 32156 0


\
 
 \ /
  Last update: 2008-12-25 04:53    [W:0.032 / U:0.312 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site