lkml.org 
[lkml]   [2008]   [Dec]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: ST31500341AS vs ICH10, exception Emask 0x50 SAct 0x1 SErr 0x280900 action 0x6 frozen


On Tue, 2 Dec 2008, Soeren Sonnenburg wrote:

> Dear all,
>
> I just purchased a seagate 1.5TB drive ST31500341AS, with firmware
> revision CC1G (which according to seagate is not affected by the cache
> flush bug) and I am getting the errors below (after almost a day of
> uptime without problems). The drive is replacing a 750G variant from
> seagate with which I had months of uptime and no errors whatsoever.
>
> I hope anyone has an idea?
>
> - relevant part of hdparm -I and lspci
>
> ATA device, with non-removable media
> Model Number: ST31500341AS
> Firmware Revision: CC1G
> Transport: Serial
>
> 00:1f.2 SATA controller: Intel Corporation 82801JI (ICH10 Family) SATA
> AHCI Controller
>
> - the error(tm)

A few items:

res 40/00:00:48:19:67/00:00:1e:00:00/40 Emask 0x50 (ATA bus error)
ata3: SError: { UnrecovData HostInt 10B8B BadCRC }

These are usually realted to a bad cable or connector.

ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)

Did you remove the 1.5 Gbps jumper so it can run at 3.0 Gbps?

Justin.




\
 
 \ /
  Last update: 2008-12-02 10:51    [W:0.097 / U:0.304 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site