lkml.org 
[lkml]   [2008]   [Dec]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[patch 1/8] SDHCI: Add timeout hooks
Some controllers do not provide clock information in their
capabilities (in the Samsung case, it is because there are
multiple clock sources available to the controller). Add hooks
to allow the system to supply clock information.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>

Index: linux.git/drivers/mmc/host/sdhci.c
===================================================================
--- linux.git.orig/drivers/mmc/host/sdhci.c 2008-12-01 19:11:54.000000000 +0000
+++ linux.git/drivers/mmc/host/sdhci.c 2008-12-01 19:24:14.000000000 +0000
@@ -1606,18 +1606,26 @@ int sdhci_add_host(struct sdhci_host *ho

host->max_clk =
(caps & SDHCI_CLOCK_BASE_MASK) >> SDHCI_CLOCK_BASE_SHIFT;
+ host->max_clk *= 1000000;
if (host->max_clk == 0) {
- printk(KERN_ERR "%s: Hardware doesn't specify base clock "
- "frequency.\n", mmc_hostname(mmc));
+ if (host->ops->get_max_clock)
+ host->max_clk = host->ops->get_max_clock(host);
+ else
+ printk(KERN_ERR
+ "%s: Hardware doesn't specify base clock "
+ "frequency.\n", mmc_hostname(mmc));
return -ENODEV;
}
- host->max_clk *= 1000000;

host->timeout_clk =
(caps & SDHCI_TIMEOUT_CLK_MASK) >> SDHCI_TIMEOUT_CLK_SHIFT;
if (host->timeout_clk == 0) {
- printk(KERN_ERR "%s: Hardware doesn't specify timeout clock "
- "frequency.\n", mmc_hostname(mmc));
+ if (host->ops->get_timeout_clock)
+ host->timeout_clk = host->ops->get_timeout_clock(host);
+ else
+ printk(KERN_ERR
+ "%s: Hardware doesn't specify timeout clock "
+ "frequency.\n", mmc_hostname(mmc));
return -ENODEV;
}
if (caps & SDHCI_TIMEOUT_CLK_UNIT)
Index: linux.git/drivers/mmc/host/sdhci.h
===================================================================
--- linux.git.orig/drivers/mmc/host/sdhci.h 2008-12-01 19:11:54.000000000 +0000
+++ linux.git/drivers/mmc/host/sdhci.h 2008-12-01 19:17:55.000000000 +0000
@@ -267,6 +267,8 @@ struct sdhci_host {

struct sdhci_ops {
int (*enable_dma)(struct sdhci_host *host);
+ unsigned int (*get_max_clock)(struct sdhci_host *host);
+ unsigned int (*get_timeout_clock)(struct sdhci_host *host);
};


--
Ben (ben@fluff.org, http://www.fluff.org/)

'a smiley only costs 4 bytes'


\
 
 \ /
  Last update: 2008-12-02 16:45    [W:0.381 / U:0.452 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site