lkml.org 
[lkml]   [2008]   [Nov]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 0/16 v6] PCI: Linux kernel SR-IOV support
Chris Wright wrote:
> * Greg KH (greg@kroah.com) wrote:
>> On Thu, Nov 06, 2008 at 10:47:41AM -0700, Matthew Wilcox wrote:
>>> On Thu, Nov 06, 2008 at 08:49:19AM -0800, Greg KH wrote:
>>>> On Thu, Nov 06, 2008 at 08:41:53AM -0800, H L wrote:
>>>>> I have not modified any existing drivers, but instead I threw together
>>>>> a bare-bones module enabling me to make a call to pci_iov_register()
>>>>> and then poke at an SR-IOV adapter's /sys entries for which no driver
>>>>> was loaded.
>>>>>
>>>>> It appears from my perusal thus far that drivers using these new
>>>>> SR-IOV patches will require modification; i.e. the driver associated
>>>>> with the Physical Function (PF) will be required to make the
>>>>> pci_iov_register() call along with the requisite notify() function.
>>>>> Essentially this suggests to me a model for the PF driver to perform
>>>>> any "global actions" or setup on behalf of VFs before enabling them
>>>>> after which VF drivers could be associated.
>>>> Where would the VF drivers have to be associated? On the "pci_dev"
>>>> level or on a higher one?
>>>>
>>>> Will all drivers that want to bind to a "VF" device need to be
>>>> rewritten?
>>> The current model being implemented by my colleagues has separate
>>> drivers for the PF (aka native) and VF devices. I don't personally
>>> believe this is the correct path, but I'm reserving judgement until I
>>> see some code.
>> Hm, I would like to see that code before we can properly evaluate this
>> interface. Especially as they are all tightly tied together.
>>
>>> I don't think we really know what the One True Usage model is for VF
>>> devices. Chris Wright has some ideas, I have some ideas and Yu Zhao has
>>> some ideas. I bet there's other people who have other ideas too.
>> I'd love to hear those ideas.
>
> First there's the question of how to represent the VF on the host.
> Ideally (IMO) this would show up as a normal interface so that normal tools
> can configure the interface. This is not exactly how the first round of
> patches were designed.

Whether the VF can show up as a normal interface is decided by VF
driver. VF is represented by 'pci_dev' at PCI level, so VF driver can be
loaded as normal PCI device driver.

What the software representation (eth, framebuffer, etc.) created by VF
driver is not controlled by SR-IOV framework.

So you definitely can use normal tool to configure the VF if its driver
supports that :-)

>
> Second there's the question of reserving the BDF on the host such that
> we don't have two drivers (one in the host and one in a guest) trying to
> drive the same device (an issue that shows up for device assignment as
> well as VF assignment).

If we don't reserve BDF for the device, they can't work neither in the
host nor the guest.

Without BDF, we can't access the config space of the device, the device
also can't do DMA.

Did I miss your point?

>
> Third there's the question of whether the VF can be used in the host at
> all.

Why can't? My VFs work well in the host as normal PCI devices :-)

>
> Fourth there's the question of whether the VF and PF drivers are the
> same or separate.

As I mentioned in another email of this thread. We can't predict how
hardware vendor creates their SR-IOV device. PCI SIG doesn't define
device specific logics.

So I think the answer of this question is up to the device driver
developers. If PF and VF in a SR-IOV device have similar logics, then
they can combine the driver. Otherwise, e.g., if PF doesn't have real
functionality at all -- it only has registers to control internal
resource allocation for VFs, then the drivers should be separate, right?

>
> The typical usecase is assigning the VF to the guest directly, so
> there's only enough functionality in the host side to allocate a VF,
> configure it, and assign it (and propagate AER). This is with separate
> PF and VF driver.
>
> As Anthony mentioned, we are interested in allowing the host to use the
> VF. This could be useful for containers as well as dedicating a VF (a
> set of device resources) to a guest w/out passing it through.

I've considered the container cases, we don't have problem with running
VF driver in the host.

Thanks,
Yu


\
 
 \ /
  Last update: 2008-11-07 08:09    [W:0.494 / U:0.036 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site