lkml.org 
[lkml]   [2008]   [Nov]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [RFC v2][PATCH 1/2] Add low level support for ftrace return tracing

On Fri, 7 Nov 2008, Frederic Weisbecker wrote:

> Add low level support for ftrace return tracing.
> This plug-in hooks the function call on enter an then overwrite
> their return address to a trampoline. A return handler will then
> be able to catch some information such as the time the function returned.
> Nmis are currently not supported and then the tracing is ignored when
> the watchdog is activated.
>
> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
> Cc: Steven Rostedt <rostedt@goodmis.org>
> ---
> diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile
> index fb62078..d21d708 100644
> --- a/arch/x86/kernel/Makefile
> +++ b/arch/x86/kernel/Makefile
> @@ -15,6 +15,16 @@ CFLAGS_REMOVE_ftrace.o = -pg
> CFLAGS_REMOVE_early_printk.o = -pg
> endif
>
> +ifdef CONFIG_FTRACE_RETURN

Shouldn't the CONFIG_FTRACE_RETURN be dependent on CONFIG_FUNCTION_TRACER
that is the #endif above. This probably is not needed.

> +CFLAGS_REMOVE_tsc.o = -pg
> +CFLAGS_REMOVE_rtc.o = -pg
> +CFLAGS_REMOVE_paravirt-spinlocks.o = -pg
> +CFLAGS_REMOVE_ftrace.o = -pg
> +CFLAGS_REMOVE_early_printk.o = -pg
> +endif
> +
> +
> +
> #
> # vsyscalls (which work on the user stack) should have
> # no stack-protector checks:
> @@ -67,6 +77,7 @@ obj-$(CONFIG_X86_LOCAL_APIC) += apic.o nmi.o
> obj-$(CONFIG_X86_IO_APIC) += io_apic.o
> obj-$(CONFIG_X86_REBOOTFIXUPS) += reboot_fixups_32.o
> obj-$(CONFIG_DYNAMIC_FTRACE) += ftrace.o
> +obj-$(CONFIG_FTRACE_RETURN) += ftrace.o
> obj-$(CONFIG_KEXEC) += machine_kexec_$(BITS).o
> obj-$(CONFIG_KEXEC) += relocate_kernel_$(BITS).o crash.o
> obj-$(CONFIG_CRASH_DUMP) += crash_dump_$(BITS).o
> diff --git a/arch/x86/kernel/entry_32.S b/arch/x86/kernel/entry_32.S
> index 9134de8..c2eb2c5 100644
> --- a/arch/x86/kernel/entry_32.S
> +++ b/arch/x86/kernel/entry_32.S
> @@ -1188,7 +1188,13 @@ ENTRY(mcount)
>
> cmpl $ftrace_stub, ftrace_trace_function
> jnz trace
> +#ifdef CONFIG_FTRACE_RETURN
> + cmpl $ftrace_return_stub, ftrace_function_return
> + jnz trace_return
> +#endif
> .globl ftrace_stub
> +.globl ftrace_return_stub
> +ftrace_return_stub:

Hmm, ftrace_stub will always be just a ret. Can't you just reuse
ftrace_stub?

> ftrace_stub:
> ret
>
> @@ -1206,7 +1212,23 @@ trace:
> popl %edx
> popl %ecx
> popl %eax
> + jmp ftrace_stub
>
> +#ifdef CONFIG_FTRACE_RETURN
> +trace_return:
> + pushl %eax
> + pushl %ecx
> + pushl %edx
> + movl 0xc(%esp), %eax
> + pushl %eax
> + lea 0x4(%ebp), %eax
> + pushl %eax
> + call prepare_ftrace_return
> + addl $8, %esp
> + popl %edx
> + popl %ecx
> + popl %eax
> +#endif
> jmp ftrace_stub

This is a hanging "jmp ftrace_stub" when CNOFIG_FTRACE_RETURN is not set.

> END(mcount)
> #endif /* CONFIG_DYNAMIC_FTRACE */
> diff --git a/arch/x86/kernel/ftrace.c b/arch/x86/kernel/ftrace.c
> index 6914933..2bdd11d 100644
> --- a/arch/x86/kernel/ftrace.c
> +++ b/arch/x86/kernel/ftrace.c
> @@ -18,29 +18,236 @@
> #include <linux/list.h>
>
> #include <asm/ftrace.h>
> +#include <linux/ftrace.h>
> #include <asm/nops.h>
> +#include <asm/nmi.h>
>
>
> -static unsigned char ftrace_nop[MCOUNT_INSN_SIZE];
> +static int ftrace_calc_offset(long ip, long addr)
> +{
> + return (int)(addr - ip);
> +}
>
> -union ftrace_code_union {
> - char code[MCOUNT_INSN_SIZE];
> +#ifdef CONFIG_FTRACE_RETURN
> +#define FTRACE_TRAMPOLINE_SIZE 32
> +
> +struct ftrace_return_data {
> + /* Bitmap which defines free slots in func table */
> + unsigned long bitmap;
> + raw_spinlock_t bitmap_lock;
> + union ftrace_return_code_union *trampoline;
> + struct ftrace_retfunc *func_table;
> + unsigned long overrun;
> +};
> +
> +static struct ftrace_return_data ftrace_return_state;
> +
> +/*
> + * On each slot of this trampoline we have
> + * push $index
> + * call ftrace_return_to_handler
> + * Index is the place in the func table where
> + * are stored the information for the current
> + * call frame.
> + */
> +union ftrace_return_code_union {
> + char code[MCOUNT_INSN_SIZE + 2];
> struct {
> - char e8;
> + char push; /* push imm8 */
> + char index; /* index on the trampoline/func table */
> + char e8; /* call to the return handler */
> int offset;
> } __attribute__((packed));
> };
>
>
> -static int ftrace_calc_offset(long ip, long addr)
> +void ftrace_call_replace(char index, unsigned long ip, unsigned long addr,
> + union ftrace_return_code_union *calc)
> {
> - return (int)(addr - ip);
> + calc->push = 0x6a;
> + calc->index = index;
> + calc->e8 = 0xe8;
> + calc->offset = ftrace_calc_offset(ip + 2 + MCOUNT_INSN_SIZE, addr);
> +

Heads up, some of this code will be modified in the future to handle
trampolines used by modules. But you don't have to worry about that yet.
;-)


> }
>
> -unsigned char *ftrace_nop_replace(void)
> +asmlinkage
> +void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr)
> {
> - return ftrace_nop;
> + unsigned long flags;
> + int index;
> + unsigned long old, trampoline;
> + int faulted;
> +
> + /* Nmi's are currently unsupported */
> + if (atomic_read(&nmi_active))

Would "in_nmi()" be better?

> + return;
> +
> + raw_local_irq_save(flags);
> + __raw_spin_lock(&ftrace_return_state.bitmap_lock);
> + if (!ftrace_return_state.bitmap) {
> + __raw_spin_unlock(&ftrace_return_state.bitmap_lock);
> + raw_local_irq_restore(flags);
> + return;
> + }
> + /* Find next free slot and reserve */
> + index = ffs(ftrace_return_state.bitmap) - 1;
> + clear_bit(index, &ftrace_return_state.bitmap);

Have you thought about using the stack? Or just add something to the
task struct, a list of return pointers. Or just add it to the thread info
struct itself. Make it a depth of 30 or something, and if you hit the max
depth, bail. (Note the thread info is on the task's stack)

> +
> + __raw_spin_unlock(&ftrace_return_state.bitmap_lock);
> + raw_local_irq_restore(flags);
> + ftrace_return_state.func_table[index].func = self_addr;
> +
> + trampoline = (unsigned long)&ftrace_return_state.trampoline[index];
> +
> + /*
> + * Protect against fault, even if it shouldn't
> + * happen. This tool is too much intrusive to
> + * ignore such a protection.
> + */
> + asm volatile(
> + "1: movl (%3), %1\n"
> + "2: movl %4, (%0)\n"
> + " movl $0, %2\n"
> +
> + ".section .fixup, \"ax\"\n"
> + "3: movl $1, %2\n"
> + ".previous\n"
> +
> + ".section __ex_table, \"a\"\n"
> + " .long 1b, 3b\n"
> + " .long 2b, 3b\n"
> + ".previous\n"
> +
> + : "=rm" (parent), "=r" (old), "=r" (faulted)
> + : "0" (parent), "r" (trampoline)
> + : "memory"

BTW, I suggest using names instead of the %#, see
arch/sparc64/kernel/ftrace.c for details.

> + );
> +
> + if (faulted) {
> + set_bit(index, &ftrace_return_state.bitmap);

You said that this should never fault, correct. Lets be conservative and
have a way to WARN_ON and shut everything down if you detect something
that is not suppose to happen.


> + return;
> + }
> +
> + if (!__kernel_text_address(old)) {

Again, this should WARN_ON and shut things down.

> + set_bit(index, &ftrace_return_state.bitmap);
> + *parent = old;
> + return;
> + }
> +
> +
> + ftrace_return_state.func_table[index].ret = old;
> + ftrace_return_state.func_table[index].calltime =
> + cpu_clock(raw_smp_processor_id());

We might be able to save the call time in the tracer when it happens.
This way we do not need to save it here.

> +}
> +
> +/*
> + * No caller of this function is really aware it is calling it since
> + * it is a hooker called through a trampoline which passes the offset
> + * of the function in the func table through the stack. So we have to
> + * clean the stack ourself. Hence the stdcall.
> + * We want to be sure our offset pushed on the stack will not be assumed
> + * to be transmitted through a register => asmlinkage.
> + */

Hmm, I'm surprised you did not have the return to asm, and have asm
call this function do the clean up, and then the asm can simply jump back.

e.g.

return_to_handler:
push $0
push %eax
push %ecx
push %edx
call ftrace_return_to_handler
/* ftrace_return_to_hander returns the original ret addr */
mov %eax, 12(%esp)
pop %edx
pop %ecx
pop %eax
/* the original ret addr is next on the stack */
ret

Of course you still need a way to add the index needed, but then if you
did my way of adding the return values to the thread info then you don't
need that. All you need is to add say 20 or 30 return addresses and time
stamps.

30 entries will add 360 bytes to the stack. If you only do 20 (which
would probably be better) then that would add 240 bytes. That is to store
a 4 byte return address (on 32 bit archs) and a 8 byte timestamp.


> +__attribute__((stdcall)) asmlinkage static
> +unsigned long ftrace_return_to_handler(int index)
> +{
> + struct ftrace_retfunc *table;
> + unsigned long ret;
> + unsigned long eax, edx;
> +
> + /*
> + * The function we are hooking on return could have
> + * a return value. Just keep the value of eax and return
> + * it in the end. We keep edx too for 64 bits return
> + * values.
> + */

The above asm version would handle the return value too.

> +
> + asm volatile(
> + "movl %%eax, %0\n"
> + "movl %%edx, %1\n"
> + : "=r" (eax), "=r" (edx)
> + : : "memory"
> + );
> +
> + table = &ftrace_return_state.func_table[index];
> + ret = table->ret;
> + table->rettime = cpu_clock(raw_smp_processor_id());
> + ftrace_function_return(table);
> +
> + set_bit(index, &ftrace_return_state.bitmap);
> +
> + /* Put the original return address of the hooked function as our
> + * return address and restore the return values.
> + */
> + asm volatile (
> + "movl %0, 4(%%ebp)\n"
> + "movl %1, %%edx\n"
> + : : "r" (ret), "r" (edx)
> + : "memory"
> + );
> +
> + return eax;
> +}
> +
> +/*
> + * Set the trampoline.
> + * See union ftrace_return_code_union.
> + */
> +static void __init fill_trampoline(void)
> +{
> + union ftrace_return_code_union tramp_code;
> + int i;
> + unsigned long ip;
> +
> + for (i = 0; i < FTRACE_TRAMPOLINE_SIZE; i++) {
> + ip = (unsigned long)&ftrace_return_state.trampoline[i];
> + ftrace_call_replace((char)i, ip,
> + (unsigned long)&ftrace_return_to_handler,
> + &tramp_code);
> + memcpy(&ftrace_return_state.trampoline[i],
> + &tramp_code, sizeof(union ftrace_return_code_union));
> + }
> +}
> +
> +static int __init init_ftrace_function_return(void)
> +{
> + ftrace_return_state.bitmap_lock =
> + (raw_spinlock_t)__RAW_SPIN_LOCK_UNLOCKED;
> + ftrace_return_state.trampoline = kmalloc(
> + sizeof(union ftrace_return_code_union) *
> + FTRACE_TRAMPOLINE_SIZE,
> + GFP_KERNEL);
> + if (!ftrace_return_state.trampoline)
> + return -ENOMEM;
> +
> + fill_trampoline();
> + /* Allocate 32 slots */
> + ftrace_return_state.bitmap = ~0;
> + ftrace_return_state.func_table = kmalloc(FTRACE_TRAMPOLINE_SIZE *
> + sizeof(struct ftrace_retfunc),
> + GFP_KERNEL);
> + if (!ftrace_return_state.func_table) {
> + kfree(ftrace_return_state.trampoline);
> + return -ENOMEM;
> + }
> + ftrace_return_state.overrun = 0;
> + return 0;
> }
> +device_initcall(init_ftrace_function_return);
> +
> +
> +#endif
> +
> +#ifdef CONFIG_DYNAMIC_FTRACE
> +
> +union ftrace_code_union {
> + char code[MCOUNT_INSN_SIZE];
> + struct {
> + char e8;
> + int offset;
> + } __attribute__((packed));
> +};
>
> unsigned char *ftrace_call_replace(unsigned long ip, unsigned long addr)
> {
> @@ -183,6 +390,15 @@ do_ftrace_mod_code(unsigned long ip, void *new_code)
> }
>
>
> +
> +
> +static unsigned char ftrace_nop[MCOUNT_INSN_SIZE];
> +
> +unsigned char *ftrace_nop_replace(void)
> +{
> + return ftrace_nop;
> +}
> +
> int
> ftrace_modify_code(unsigned long ip, unsigned char *old_code,
> unsigned char *new_code)
> @@ -292,3 +508,4 @@ int __init ftrace_dyn_arch_init(void *data)
>
> return 0;
> }
> +#endif
> diff --git a/include/linux/ftrace.h b/include/linux/ftrace.h
> index 1f5608c..41760d9 100644
> --- a/include/linux/ftrace.h
> +++ b/include/linux/ftrace.h
> @@ -267,6 +267,22 @@ ftrace_init_module(unsigned long *start, unsigned long *end) { }
> #endif
>
>
> +#ifdef CONFIG_FTRACE_RETURN
> +struct ftrace_retfunc {
> + unsigned long ret;
> + unsigned long func;
> + unsigned long long calltime;
> + unsigned long long rettime;
> +};
> +
> +extern atomic_t disable_return;
> +
> +extern void ftrace_return_stub(struct ftrace_retfunc *);
> +extern void register_ftrace_return(void (*func)(struct ftrace_retfunc *));
> +extern void (*ftrace_function_return)(struct ftrace_retfunc *);
> +extern void unregister_ftrace_return(void);
> +#endif
> +
> /*
> * Structure which defines the trace of an initcall.
> * You don't have to fill the func field since it is
> diff --git a/kernel/extable.c b/kernel/extable.c
> index adf0cc9..5caa856 100644
> --- a/kernel/extable.c
> +++ b/kernel/extable.c

I'd still like to trace these functions. Instead of adding the notrace
here, Use the CFLAGS_REMOVE_extable.o = -pg in the Makefile when your
CONFIG_FTRACE_RETURN is set.


> @@ -40,7 +40,7 @@ const struct exception_table_entry *search_exception_tables(unsigned long addr)
> return e;
> }
>
> -int core_kernel_text(unsigned long addr)
> +notrace int core_kernel_text(unsigned long addr)
> {
> if (addr >= (unsigned long)_stext &&
> addr <= (unsigned long)_etext)
> @@ -53,7 +53,7 @@ int core_kernel_text(unsigned long addr)
> return 0;
> }
>
> -int __kernel_text_address(unsigned long addr)
> +notrace int __kernel_text_address(unsigned long addr)
> {
> if (core_kernel_text(addr))
> return 1;
> diff --git a/kernel/module.c b/kernel/module.c
> index 48c323c..23bedc5 100644
> --- a/kernel/module.c
> +++ b/kernel/module.c
> @@ -2714,7 +2714,7 @@ int is_module_address(unsigned long addr)
>
>
> /* Is this a valid kernel address? */
> -struct module *__module_text_address(unsigned long addr)
> +notrace struct module *__module_text_address(unsigned long addr)
> {
> struct module *mod;
>
>
>


Other than what I've said above, this looks promising.

-- Steve


\
 
 \ /
  Last update: 2008-11-07 19:49    [W:0.048 / U:0.776 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site