Messages in this thread | | | Date | Fri, 7 Nov 2008 13:38:14 -0200 | From | Arnaldo Carvalho de Melo <> | Subject | Re: [PATCH][v3] blktrace: conversion to tracepoints |
| |
Em Fri, Nov 07, 2008 at 03:32:16PM +0100, Jens Axboe escreveu: > On Fri, Nov 07 2008, Alan D. Brunelle wrote: > > > > > > > > I'll apply this for 2.6.29. I'm assuming you have tested this as well? > > > > > > > FYI: I tested this on a 16-way AMD x86_64 box (128GB RAM, a couple of > > Smart Array (CCISS) P800's). Running Jens' for-2.6.29 git tree versus a > > recent Linus 2.6.28-rc3 tree. I was doing kernel makes (10 passes for > > both kernels), and found that things worked just fine. All values below > > are in seconds: > > > > 2.6.28-rc3: > > > > Part Min Avg Max Dev > > -------- ------- ------- ------- ------- > > untar 17.996 22.565 23.522 1.690 > > mk-cfg 3.279 3.454 3.529 0.070 > > mk-kern 140.837 141.557 142.549 0.626 > > mk-clean 10.460 11.604 12.710 0.758 > > -------- ------- ------- ------- ------- > > Combd 172.941 179.180 181.600 2.470 > > ======== ======= ======= ======= ======= > > %sys 7.67% 7.78% 8.03% 0.114 > > > > > > Jens' origin/for-2.6.29: > > > > Part Min Avg Max Dev > > -------- ------- ------- ------- ------- > > untar 18.138 22.576 24.279 1.693 > > mk-cfg 3.270 3.483 3.751 0.118 > > mk-kern 141.290 142.115 142.666 0.439 > > mk-clean 8.263 9.609 10.211 0.624 > > -------- ------- ------- ------- ------- > > Combd 173.736 177.783 179.654 1.786 > > ======== ======= ======= ======= ======= > > %sys 7.77% 7.85% 8.01% 0.074 > > > > > > Not sure why the 'make clean' portion of the runs went noticeably better > > with the newer code, but in any event, I don't see much difference > > elsewhere, and for sure the blktrace portion of things worked correctly. > > [blktrace + blkparse + blkrawverify + btt all worked just fine out of > > the box.] > > Thanks a lot for running that test Alan, I think it looks fine!
Indeed, thanks a lot!
- Arnaldo
| |