lkml.org 
[lkml]   [2008]   [Nov]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
SubjectRe: [RFC] Add PR_PREFIX to pr_xyz macros.
From
Date
On Fri, 2008-11-14 at 13:32 -0800, Andrew Morton wrote:
> > Subject: [PATCH] Add PR_PREFIX to pr_xyz macros.
> >
> > From: Martin Schwidefsky <schwidefsky@de.ibm.com>
> >
> > A common reason for device drivers to implement their own printk macros
> > is the lack of a printk prefix with the standard pr_xyz macros. Introduce
> > a pr_fmt macro that is applied for every pr_xyz macro to the format string.
> > The most common use of the pr_fmt macro would be to add the name of the
> > device driver to all pr_xyz messages in a source file.
> >
>
> Seems sane. It would be nice to see one such driver converted over (hint;))

I now have about two dozen examples, I've created the patches after
Linus suggested to have the pr_fmt macro in the driver. One example is
below. The same will be done for all s390 device drivers.

--
blue skies,
Martin.

"Reality continues to ruin my life." - Calvin.

---
Subject: [PATCH] convert sclp printks to pr_xxx macros.

From: Martin Schwidefsky <schwidefsky@de.ibm.com>

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---

drivers/s390/char/sclp_cmd.c | 29 ++++++++++++++++-------------
drivers/s390/char/sclp_config.c | 10 ++++++----
drivers/s390/char/sclp_cpi_sys.c | 12 ++++++++----
drivers/s390/char/sclp_sdias.c | 18 +++++++++++-------
4 files changed, 41 insertions(+), 28 deletions(-)

diff -urpN linux-2.6/drivers/s390/char/sclp_cmd.c linux-2.6-patched/drivers/s390/char/sclp_cmd.c
--- linux-2.6/drivers/s390/char/sclp_cmd.c 2008-11-14 17:49:35.000000000 +0100
+++ linux-2.6-patched/drivers/s390/char/sclp_cmd.c 2008-11-14 17:50:21.000000000 +0100
@@ -6,6 +6,9 @@
* Peter Oberparleiter <peter.oberparleiter@de.ibm.com>
*/

+#define KMSG_COMPONENT "sclp_cmd"
+#define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
+
#include <linux/completion.h>
#include <linux/init.h>
#include <linux/errno.h>
@@ -16,9 +19,8 @@
#include <linux/memory.h>
#include <asm/chpid.h>
#include <asm/sclp.h>
-#include "sclp.h"

-#define TAG "sclp_cmd: "
+#include "sclp.h"

#define SCLP_CMDW_READ_SCP_INFO 0x00020001
#define SCLP_CMDW_READ_SCP_INFO_FORCED 0x00120001
@@ -169,8 +171,8 @@ static int do_sync_request(sclp_cmdw_t c

/* Check response. */
if (request->status != SCLP_REQ_DONE) {
- printk(KERN_WARNING TAG "sync request failed "
- "(cmd=0x%08x, status=0x%02x)\n", cmd, request->status);
+ pr_warning("sync request failed (cmd=0x%08x, "
+ "status=0x%02x)\n", cmd, request->status);
rc = -EIO;
}
out:
@@ -224,8 +226,8 @@ int sclp_get_cpu_info(struct sclp_cpu_in
if (rc)
goto out;
if (sccb->header.response_code != 0x0010) {
- printk(KERN_WARNING TAG "readcpuinfo failed "
- "(response=0x%04x)\n", sccb->header.response_code);
+ pr_warning("readcpuinfo failed (response=0x%04x)\n",
+ sccb->header.response_code);
rc = -EIO;
goto out;
}
@@ -262,8 +264,9 @@ static int do_cpu_configure(sclp_cmdw_t
case 0x0120:
break;
default:
- printk(KERN_WARNING TAG "configure cpu failed (cmd=0x%08x, "
- "response=0x%04x)\n", cmd, sccb->header.response_code);
+ pr_warning("configure cpu failed (cmd=0x%08x, "
+ "response=0x%04x)\n", cmd,
+ sccb->header.response_code);
rc = -EIO;
break;
}
@@ -626,9 +629,9 @@ static int do_chp_configure(sclp_cmdw_t
case 0x0450:
break;
default:
- printk(KERN_WARNING TAG "configure channel-path failed "
- "(cmd=0x%08x, response=0x%04x)\n", cmd,
- sccb->header.response_code);
+ pr_warning("configure channel-path failed "
+ "(cmd=0x%08x, response=0x%04x)\n", cmd,
+ sccb->header.response_code);
rc = -EIO;
break;
}
@@ -695,8 +698,8 @@ int sclp_chp_read_info(struct sclp_chp_i
if (rc)
goto out;
if (sccb->header.response_code != 0x0010) {
- printk(KERN_WARNING TAG "read channel-path info failed "
- "(response=0x%04x)\n", sccb->header.response_code);
+ pr_warning("read channel-path info failed "
+ "(response=0x%04x)\n", sccb->header.response_code);
rc = -EIO;
goto out;
}
diff -urpN linux-2.6/drivers/s390/char/sclp_config.c linux-2.6-patched/drivers/s390/char/sclp_config.c
--- linux-2.6/drivers/s390/char/sclp_config.c 2008-10-10 00:13:53.000000000 +0200
+++ linux-2.6-patched/drivers/s390/char/sclp_config.c 2008-11-14 17:50:21.000000000 +0100
@@ -5,15 +5,17 @@
* Author(s): Heiko Carstens <heiko.carstens@de.ibm.com>
*/

+#define KMSG_COMPONENT "sclp_config"
+#define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
+
#include <linux/init.h>
#include <linux/errno.h>
#include <linux/cpu.h>
#include <linux/sysdev.h>
#include <linux/workqueue.h>
#include <asm/smp.h>
-#include "sclp.h"

-#define TAG "sclp_config: "
+#include "sclp.h"

struct conf_mgm_data {
u8 reserved;
@@ -31,7 +33,7 @@ static void sclp_cpu_capability_notify(s
int cpu;
struct sys_device *sysdev;

- printk(KERN_WARNING TAG "cpu capability changed.\n");
+ pr_warning("cpu capability changed.\n");
get_online_cpus();
for_each_online_cpu(cpu) {
sysdev = get_cpu_sysdev(cpu);
@@ -78,7 +80,7 @@ static int __init sclp_conf_init(void)
return rc;

if (!(sclp_conf_register.sclp_send_mask & EVTYP_CONFMGMDATA_MASK)) {
- printk(KERN_WARNING TAG "no configuration management.\n");
+ pr_warning("no configuration management.\n");
sclp_unregister(&sclp_conf_register);
rc = -ENOSYS;
}
diff -urpN linux-2.6/drivers/s390/char/sclp_cpi_sys.c linux-2.6-patched/drivers/s390/char/sclp_cpi_sys.c
--- linux-2.6/drivers/s390/char/sclp_cpi_sys.c 2008-10-10 00:13:53.000000000 +0200
+++ linux-2.6-patched/drivers/s390/char/sclp_cpi_sys.c 2008-11-14 17:50:21.000000000 +0100
@@ -7,6 +7,9 @@
* Michael Ernst <mernst@de.ibm.com>
*/

+#define KMSG_COMPONENT "sclp_cpi"
+#define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
+
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/stat.h>
@@ -20,6 +23,7 @@
#include <linux/completion.h>
#include <asm/ebcdic.h>
#include <asm/sclp.h>
+
#include "sclp.h"
#include "sclp_rw.h"
#include "sclp_cpi_sys.h"
@@ -150,16 +154,16 @@ static int cpi_req(void)
wait_for_completion(&completion);

if (req->status != SCLP_REQ_DONE) {
- printk(KERN_WARNING "cpi: request failed (status=0x%02x)\n",
- req->status);
+ pr_warning("request failed (status=0x%02x)\n",
+ req->status);
rc = -EIO;
goto out_free_req;
}

response = ((struct cpi_sccb *) req->sccb)->header.response_code;
if (response != 0x0020) {
- printk(KERN_WARNING "cpi: failed with "
- "response code 0x%x\n", response);
+ pr_warning("request failed with response code 0x%x\n",
+ response);
rc = -EIO;
}

diff -urpN linux-2.6/drivers/s390/char/sclp_sdias.c linux-2.6-patched/drivers/s390/char/sclp_sdias.c
--- linux-2.6/drivers/s390/char/sclp_sdias.c 2008-10-10 00:13:53.000000000 +0200
+++ linux-2.6-patched/drivers/s390/char/sclp_sdias.c 2008-11-14 17:50:21.000000000 +0100
@@ -5,15 +5,18 @@
* Author(s): Michael Holzheu
*/

+#define KMSG_COMPONENT "sclp_sdias"
+#define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
+
#include <linux/sched.h>
#include <asm/sclp.h>
#include <asm/debug.h>
#include <asm/ipl.h>
+
#include "sclp.h"
#include "sclp_rw.h"

#define TRACE(x...) debug_sprintf_event(sdias_dbf, 1, x)
-#define ERROR_MSG(x...) printk ( KERN_ALERT "SDIAS: " x )

#define SDIAS_RETRIES 300
#define SDIAS_SLEEP_TICKS 50
@@ -131,7 +134,7 @@ int sclp_sdias_blk_count(void)

rc = sdias_sclp_send(&request);
if (rc) {
- ERROR_MSG("sclp_send failed for get_nr_blocks\n");
+ pr_err("sclp_send failed for get_nr_blocks\n");
goto out;
}
if (sccb.hdr.response_code != 0x0020) {
@@ -145,7 +148,8 @@ int sclp_sdias_blk_count(void)
rc = sccb.evbuf.blk_cnt;
break;
default:
- ERROR_MSG("SCLP error: %x\n", sccb.evbuf.event_status);
+ pr_err("SCLP error: %x\n",
+ sccb.evbuf.event_status);
rc = -EIO;
goto out;
}
@@ -201,7 +205,7 @@ int sclp_sdias_copy(void *dest, int star

rc = sdias_sclp_send(&request);
if (rc) {
- ERROR_MSG("sclp_send failed: %x\n", rc);
+ pr_err("sclp_send failed: %x\n", rc);
goto out;
}
if (sccb.hdr.response_code != 0x0020) {
@@ -219,9 +223,9 @@ int sclp_sdias_copy(void *dest, int star
case EVSTATE_NO_DATA:
TRACE("no data\n");
default:
- ERROR_MSG("Error from SCLP while copying hsa. "
- "Event status = %x\n",
- sccb.evbuf.event_status);
+ pr_err("Error from SCLP while copying hsa. "
+ "Event status = %x\n",
+ sccb.evbuf.event_status);
rc = -EIO;
}
out:



\
 
 \ /
  Last update: 2008-11-15 10:03    [W:0.042 / U:0.288 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site