lkml.org 
[lkml]   [2008]   [Nov]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[patch 40/49] ARM: 5300/1: fixup spitz reset during boot
2.6.27-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Dmitry Baryshkov <dbaryshkov@gmail.com>

commit 69fc7eed5f56bce15b239e5110de2575a6970df4 upstream

Some machines don't have the pullup/down on their reset
pin, so configuring the reset generating pin as input makes
them reset immediately. Fix that by making reset pin direction
configurable.

This fixes the boot problem on Sharp Zaurus c3000

Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
arch/arm/mach-pxa/include/mach/reset.h | 9 ++++++---
arch/arm/mach-pxa/reset.c | 9 ++++++---
arch/arm/mach-pxa/spitz.c | 2 +-
arch/arm/mach-pxa/tosa.c | 2 +-
4 files changed, 14 insertions(+), 8 deletions(-)

--- a/arch/arm/mach-pxa/include/mach/reset.h
+++ b/arch/arm/mach-pxa/include/mach/reset.h
@@ -10,9 +10,12 @@
extern unsigned int reset_status;
extern void clear_reset_status(unsigned int mask);

-/*
- * register GPIO as reset generator
+/**
+ * init_gpio_reset() - register GPIO as reset generator
+ *
+ * @gpio - gpio nr
+ * @output - set gpio as out/low instead of input during normal work
*/
-extern int init_gpio_reset(int gpio);
+extern int init_gpio_reset(int gpio, int output);

#endif /* __ASM_ARCH_RESET_H */
--- a/arch/arm/mach-pxa/reset.c
+++ b/arch/arm/mach-pxa/reset.c
@@ -20,7 +20,7 @@ static void do_hw_reset(void);

static int reset_gpio = -1;

-int init_gpio_reset(int gpio)
+int init_gpio_reset(int gpio, int output)
{
int rc;

@@ -30,9 +30,12 @@ int init_gpio_reset(int gpio)
goto out;
}

- rc = gpio_direction_input(gpio);
+ if (output)
+ rc = gpio_direction_output(gpio, 0);
+ else
+ rc = gpio_direction_input(gpio);
if (rc) {
- printk(KERN_ERR "Can't configure reset_gpio for input\n");
+ printk(KERN_ERR "Can't configure reset_gpio\n");
gpio_free(gpio);
goto out;
}
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -548,7 +548,7 @@ static void spitz_restart(char mode)

static void __init common_init(void)
{
- init_gpio_reset(SPITZ_GPIO_ON_RESET);
+ init_gpio_reset(SPITZ_GPIO_ON_RESET, 1);
pm_power_off = spitz_poweroff;
arm_pm_restart = spitz_restart;

--- a/arch/arm/mach-pxa/tosa.c
+++ b/arch/arm/mach-pxa/tosa.c
@@ -781,7 +781,7 @@ static void __init tosa_init(void)
gpio_set_wake(MFP_PIN_GPIO1, 1);
/* We can't pass to gpio-keys since it will drop the Reset altfunc */

- init_gpio_reset(TOSA_GPIO_ON_RESET);
+ init_gpio_reset(TOSA_GPIO_ON_RESET, 0);

pm_power_off = tosa_poweroff;
arm_pm_restart = tosa_restart;
--


\
 
 \ /
  Last update: 2008-11-12 01:45    [W:0.139 / U:0.072 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site