lkml.org 
[lkml]   [2008]   [Nov]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: 2.6.27.2 USB reset/IO Error problem when high load on ICH9 USB
On Fri, 31 Oct 2008, Andrew Morton wrote:

> (cc linux-usb)
>
> On Thu, 30 Oct 2008 06:22:49 +0100 Kasper Sandberg <lkml@metanurb.dk> wrote:
>
> > Hello..
> >
> > I had to write an image to some usb flash drives, more specifically, 4GB
> > kingston datatraveler sticks, and i figured, instead of doing just 1 at
> > a time, i may aswell do 4, so i plugged in 4, and started 4 dd's of the
> > images, to sdc, sdd, sde, sdf. However, i got usb disconnects and IO
> > error messages from the kernel, these are at end of message. I had
> > previously done ~5 writes of images to 5 other flash disks with no
> > problem, but when i tried the next batch, those 4, it gave these errors.
> > I killed the dd's, pulled them all out, and put in 1 at a time, and it
> > worked perfectly.

Sounds like a hardware problem.

Alan Stern



\
 
 \ /
  Last update: 2008-11-02 03:43    [W:0.049 / U:0.756 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site