lkml.org 
[lkml]   [2008]   [Oct]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH v3] rfkill-input doesn't work until 5 minutes after boot
Hi Matthew,

On Sun, Oct 05, 2008 at 12:02:26PM +0100, Matthew Garrett wrote:
> rfkill-input implements debounce as follows:
>
> if (time_after(jiffies, task->last + msecs_to_jiffies(200))) {
>
> However, task->last is initialised to 0 while jiffies starts at -300*HZ.
> Any input within 5 minutes of kernel start is therefore ignored. Fix by
> initialising task->last correctly.
>
> Signed-off-by: Matthew Garrett <mjg@redhat.com>
>

I'd rather have something like below. It should probably go through
David's (networking) tree. since it is in net/.

--
Dmitry

Input: rfkill-input doesn't work until 5 minutes after boot

From: Matthew Garrett <mjg59@srcf.ucam.org>

rfkill-input implements debounce as follows:

if (time_after(jiffies, task->last + msecs_to_jiffies(200))) {

However, task->last is initialised to 0 while jiffies starts at -300*HZ.
Any input within 5 minutes of kernel start is therefore ignored. Fix by
initialising task->last at module load.

Signed-off-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---

net/rfkill/rfkill-input.c | 28 ++++++++++++++++++----------
1 files changed, 18 insertions(+), 10 deletions(-)


diff --git a/net/rfkill/rfkill-input.c b/net/rfkill/rfkill-input.c
index e5b6955..775c6ba 100644
--- a/net/rfkill/rfkill-input.c
+++ b/net/rfkill/rfkill-input.c
@@ -109,21 +109,24 @@ static DEFINE_RFKILL_TASK(rfkill_uwb, RFKILL_TYPE_UWB);
static DEFINE_RFKILL_TASK(rfkill_wimax, RFKILL_TYPE_WIMAX);
static DEFINE_RFKILL_TASK(rfkill_wwan, RFKILL_TYPE_WWAN);

+static struct rfkill_task *rfkill_tasks[] = {
+ &rfkill_wlan,
+ &rfkill_bt,
+ &rfkill_uwb,
+ &rfkill_wimax,
+ &rfkill_wwan,
+};
+
static void rfkill_schedule_evsw_rfkillall(int state)
{
+ int i;
+
/* EVERY radio type. state != 0 means radios ON */
/* handle EPO (emergency power off) through shortcut */
if (state) {
- rfkill_schedule_set(&rfkill_wwan,
- RFKILL_STATE_UNBLOCKED);
- rfkill_schedule_set(&rfkill_wimax,
- RFKILL_STATE_UNBLOCKED);
- rfkill_schedule_set(&rfkill_uwb,
- RFKILL_STATE_UNBLOCKED);
- rfkill_schedule_set(&rfkill_bt,
- RFKILL_STATE_UNBLOCKED);
- rfkill_schedule_set(&rfkill_wlan,
- RFKILL_STATE_UNBLOCKED);
+ for (i = 0; i < ARRAY_SIZE(rfkill_tasks); i++)
+ rfkill_schedule_set(rfkill_tasks[i],
+ RFKILL_STATE_UNBLOCKED);
} else
rfkill_schedule_epo();
}
@@ -255,6 +258,11 @@ static struct input_handler rfkill_handler = {

static int __init rfkill_handler_init(void)
{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(rfkill_tasks); i++)
+ rfkill_tasks[i]->last = jiffies - HZ / 5;
+
return input_register_handler(&rfkill_handler);
}


\
 
 \ /
  Last update: 2008-10-05 23:27    [W:0.115 / U:0.024 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site