lkml.org 
[lkml]   [2008]   [Oct]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: ath5k gets lost with eeepc-laptop removal
2008/10/31 Luiz Fernando N. Capitulino <lcapitulino@mandriva.com.br>:
>
> Hi guys,
>
> If I do a 'rmmod eeepc-laptop', while connected to my AP, I get the
> following error messages from ath5k:
>
> """
> ath5k phy0: noise floor calibration timeout (2417MHz)
> ath5k phy0: failed to wakeup the MAC Chip
> ath5k phy0: can't reset hardware (-5)
> ath5k phy0: failed to wakeup the MAC Chip
> ath5k phy0: can't reset hardware (-5)
> wlan0: No ProbeResp from current AP 00:1d:0f:e9:c7:c0 - assume out of range
> ath5k phy0: failed to wakeup the MAC Chip
> ath5k phy0: ath5k_chan_set: unable to reset channel (2412 Mhz)
> wlan0: failed to set freq to 2412 MHz for scan
> ath5k phy0: failed to wakeup the MAC Chip
> ath5k phy0: ath5k_chan_set: unable to reset channel (2417 Mhz)
> wlan0: failed to set freq to 2417 MHz for scan
> ath5k phy0: failed to wakeup the MAC Chip
> ath5k phy0: ath5k_chan_set: unable to reset channel (2422 Mhz)
> wlan0: failed to set freq to 2422 MHz for scan
> ath5k phy0: failed to wakeup the MAC Chip
> ath5k phy0: ath5k_chan_set: unable to reset channel (2427 Mhz)
> wlan0: failed to set freq to 2427 MHz for scan
> ath5k phy0: failed to wakeup the MAC Chip
> ath5k phy0: ath5k_chan_set: unable to reset channel (2432 Mhz)
> wlan0: failed to set freq to 2432 MHz for scan
> wlan0: failed to set freq to 2437 MHz for scan
> wlan0: failed to set freq to 2442 MHz for scan
> wlan0: failed to set freq to 2447 MHz for scan
> wlan0: failed to set freq to 2452 MHz for scan
> wlan0: failed to set freq to 2457 MHz for scan
> wlan0: failed to set freq to 2462 MHz for scan
> wlan0: failed to set freq to 2467 MHz for scan
> wlan0: failed to set freq to 2472 MHz for scan
> wlan0: failed to set freq to 2484 MHz for scan
> wlan0: failed to restore operational channel after scan
> wlan0: authenticate with AP 00:1d:0f:e9:c7:c0
> wlan0: authenticate with AP 00:1d:0f:e9:c7:c0
> wlan0: authenticate with AP 00:1d:0f:e9:c7:c0
> wlan0: authentication with AP 00:1d:0f:e9:c7:c0 timed out
> """
>
> Then I lost my wireless connection.
>
> I'm running latest Linus git tree (2.6.28-rc2) on a Eeepc 701.
>
> The problem doesn't happen on 2.6.27.4, but as 2.6.28-rc1 doesn't
> boot on this machine, it would be a bit difficult to bisect it.
>
> Thanks.
>

After this does ath_info work ?


--
GPG ID: 0xD21DB2DB
As you read this post global entropy rises. Have Fun ;-)
Nick


\
 
 \ /
  Last update: 2008-10-31 17:29    [W:0.956 / U:0.008 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site